Global Affairs Canada / Affaires mondiales Canada 
B4Date: 2022-12-01
Canadian Steel Imports by Port of Entry
Period Start: 2021-01-01 Period Ending: 2021-12-31
Port of EntryHS_CodeCmdty_Eng_DescMonthCountryOfOriginCountryOfExportStateOfExportTonnesC$1000C$/Tonne
7211140010Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Other, of a thickness of 4.75 mm or more - Not in coils10United States20.9939.721,892
7216330092Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Other: - Of a height exceeding 152.4 mm7United States20.3630.121,480
7306190090Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Line pipe of a kind used for oil or gas pipelines: - Other - Other5United States205.18214.201,044
6United States72.7359.90824
7United States20.7235.121,695
114.1098.48863
9United States125.53190.011,514
 - Total579.60667.551,152
Aldergrove7208250000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled, pickled: - Of a thickness of 4.75 mm or more11United States0.190.502,592
Of a thickness of 4.75 mm or more11United States0.190.502,592
7208360000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm10United States2.226.452,900
7208370050Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width exceeding 1,830 mm2United States22.3130.741,378
7208380050Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 3 mm or more but less than 4.75 mm - Of a width exceeding 1,830 mm2United States21.8430.091,378
7208510010Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Heat treated2United States20.7528.911,393
3United States22.5237.991,687
30.7153.821,753
4United States58.71107.311,828
5United States25.7441.761,622
7United States0.800.78979
7208510091Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other: - Of a width of 600 mm or more but not exceeding 1,525 mm2United States11.5512.131,050
3United States4.156.761,629
4.717.731,643
5United States4.8514.022,892
7208510092Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other: - Of a width exceeding 1,525 mm but not exceeding 1,830 mm3United States13.4121.291,588
4United States0.671.071,597
9United States16.9139.772,352
7208510093Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other: - Of a width exceeding 1,830 mm but not exceeding 2,450 mm1United States95.62130.841,368
2United States64.1396.251,501
3United States43.2068.371,583
4United States79.47150.091,889
5United States16.0027.521,720
6United States125.41179.541,432
7United States17.7835.682,006
44.45105.942,383
8United States100.84201.451,998
9United States197.68454.632,300
10United States45.55109.462,403
12United States56.83157.092,764
7208510094Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other: - Of a width exceeding 2,450 mm but not exceeding 3,050 mm2United States16.6726.701,601
3United States3.766.341,687
59.6198.321,650
4United States36.8160.361,640
7United States38.2672.551,896
8United States24.1151.562,138
9United States49.96110.982,221
10United States25.2871.642,834
11United States23.1658.202,513
7208510095Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other: - Of a width exceeding 3,050 mm4United States11.1112.591,133
7208520010Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Heat treated6United States10.8421.311,966
10United States6.6719.912,987
12United States26.7566.042,469
Heat treated6United States10.8421.311,966
10United States6.6719.912,987
12United States26.7566.042,469
7208520091Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Other: - Of a width of 600 mm or more but not exceeding 1,525 mm7United States0.190.552,954
9United States17.2736.872,135
Of a width of 600 mm or more but not exceeding 1,525 mm7United States0.190.552,954
9United States17.2736.872,135
7208520092Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Other: - Of a width exceeding 1,525 mm but not exceeding 1,830 mm4United States8.7515.001,713
8United States40.7480.911,986
9United States24.1752.102,155
7208520093Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Other: - Of a width exceeding 1,830 mm but not exceeding 2,450 mm1United States11.1119.301,737
2United States136.34204.221,498
3United States24.2835.511,463
4United States67.55118.701,757
5United States33.9066.131,951
6United States7.9613.631,714
7United States9.7818.971,940
9United States15.1131.302,071
10United States10.6725.752,414
7208520096Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Other: - Of a width exceeding 2,450 mm2United States44.4669.911,573
3United States5.568.821,588
20.5431.631,540
9United States1.854.472,416
7208900000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other5United States4.903.04619
7United States8.8927.603,104
7209260000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - Not in coils, not further worked than cold-rolled (cold-reduced): - Of a thickness exceeding 1 mm but less than 3 mm3United States8.105.33658
5United States4.643.91842
8United States1.783.562,002
7209900000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - Other2United States0.140.694,857
8United States4.3714.163,243
9United States2.307.393,205
7210700000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Painted, varnished or coated with plastics1Japan13.587.72568
Korea, Republic of22.6912.83566
United States45.2525.70568
2Australia6.002.97495
Japan10.985.43495
Korea, Republic of33.7017.05506
United States21.7239.341,811
3Korea, Republic of17.229.73565
United States10.375.86565
24.0947.661,979
4Japan10.227.81765
Korea, Republic of28.8122.09767
5Japan19.509.32478
Korea, Republic of34.8616.70479
6Australia16.3910.43636
Japan6.633.42516
Korea, Republic of43.6628.02642
7Australia3.061.21396
Japan14.356.47451
Korea, Republic of1.960.78396
United States31.5249.511,571
9United States21.6378.133,612
10United States11.9340.853,424
11United States23.5186.693,688
12Australia16.809.35556
Japan88.5047.72539
Korea, Republic of33.3719.19575
7211130000Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief5United States15.3728.651,864
15.0029.191,945
6United States0.792.072,630
7211140010Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Other, of a thickness of 4.75 mm or more - Not in coils3United States1.772.311,305
4United States1.772.311,305
6United States11.1128.272,543
11United States5.519.491,722
7211190090Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Other - Other3United States1.672.331,397
11United States5.279.531,810
USWA0.562.294,121
12United States1.672.981,786
7213100000Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Containing indentations, ribs, grooves or other deformations produced during the rolling process1United States354.82293.66828
2United States27.1721.50791
7213100011Concrete reinforcing bars, of specification CSA G30.18: Of a diameter of 12 mm or less4United States280.90274.54977
5United States218.57194.56890
6United States27.1428.891,065
7United States26.0932.291,238
78.6497.491,240
7213100090Other2United States162.64133.26819
3United States27.2027.571,013
4United States82.67137.211,660
5United States107.06114.361,068
6United States5.4515.232,794
108.27161.211,489
10United States54.86122.772,238
12United States54.2976.891,416
7213200090Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other, of free-cutting steel - Other6United States37.94109.582,889
Other6United States37.94109.582,889
7213910050Other, containing by weight less than 0.25% of carbon4United States25.7926.981,046
5United States4.654.991,073
7213910060Other, containing by weight 0.25% or more but less than 0.6% of carbon4United States26.0023.02885
10United States52.1372.291,387
7213910070Other, containing by weight 0.6% or more of carbon2United States25.7530.601,188
5United States21.4123.991,120
7213990090Other4United States81.9672.49884
5United States27.3223.43858
Other, containing by weight 0.6% or more of carbon:4United States81.9672.49884
5United States27.3223.43858
7214200000Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling1United States27.2020.71761
6,669.065,513.15827
2United States4,008.984,056.751,012
3United States439.22457.691,042
2,389.802,505.911,049
4United States132.38143.261,082
3,632.753,894.651,072
5United States373.38408.511,094
3,477.003,824.541,100
6United States275.45306.781,114
3,649.234,020.381,102
7United States866.081,050.141,213
2,956.773,679.121,244
8United States3,744.544,735.051,265
9United States1,552.282,115.121,363
10United States2,280.132,929.831,285
11United States1,766.342,302.461,304
12United States1,611.732,081.081,291
7214300021Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Flat bars, including flat grader blade sections: - Of a width not exceeding 75 mm9United States1.674.402,640
11United States3.636.451,775
7214300090Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Other3United States57.4757.681,004
4United States55.8855.81999
5United States28.8630.581,059
11United States21.6060.472,800
7214910010Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Of a width not exceeding 75 mm1United States42.8855.061,284
7214910011Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section -Containing by weight less than 0.25% of carbon: Of a width not exceeding 76 mm2United States44.8854.331,210
3United States8.9812.981,445
49.1370.561,436
4United States37.8552.121,377
5United States8.9813.111,460
28.4642.411,490
6United States2.223.111,401
5.818.251,420
7United States11.2119.091,703
8United States42.3271.421,688
9United States75.05129.161,721
10United States104.57179.261,714
11United States61.40106.051,727
12United States56.2096.401,715
7214910012Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon: Of a width exceeding 76 mm but less than 152 mm8United States1.822.861,576
10United States1.813.461,918
12United States3.646.201,705
7214910013Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon: Of a width of 152 mm or more2United States31.4639.351,251
4United States24.4533.881,386
5United States4.456.571,479
15.6621.891,397
6United States1.882.631,404
8United States4.036.391,585
9United States4.457.661,723
10United States8.5215.591,830
11United States60.57104.181,720
12United States30.2656.871,879
7214910020Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Of a width exceeding 75 mm but less than 150 mm1United States52.2665.831,260
7214910021Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon: Of a width not exceeding 76 mm2United States21.5428.041,302
3United States2.223.211,445
6.859.971,455
4United States28.5339.421,382
5United States14.7522.371,517
6United States38.8359.911,543
7United States29.9249.551,656
8United States39.7068.171,717
9United States29.4649.961,696
10United States6.7611.271,667
11United States45.3577.611,711
12United States23.9744.751,867
7214910022Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon: Of a width exceeding 76 mm but less than 152 mm2United States2.223.051,373
4United States2.222.901,304
6United States11.108.88800
9United States3.616.821,889
7214910030Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Of a width of 150 mm or more1United States35.7848.111,345
7214910031Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.6% or more of carbon: Of a width not exceeding 76 mm2United States1.942.591,334
4United States5.567.411,334
5United States5.798.131,404
8United States13.9123.101,660
10United States1.843.291,792
11United States13.1222.621,724
12United States16.3929.221,783
7214910033Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.6% or more of carbon: Of a width of 152 mm or more12United States3.176.181,947
7214990011Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Rounds: - Of a diameter not exceeding 75 mm1United States18.0222.331,239
7214990012Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Rounds: - Of a diameter exceeding 75 mm1MexicoUSOR0.070.274,155
7214990020Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Hexagons4United States1.812.441,351
8United States3.675.691,552
7214990030Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Squares3United States3.544.651,312
4United States1.742.401,382
5United States3.374.271,270
6United States19.0025.441,339
7United States6.9511.551,662
8United States5.398.181,517
9United States5.569.991,795
10United States1.813.181,757
11United States12.8521.981,710
12United States3.637.642,108
7214990041Other, containing by weight less than 0.25% of carbon: Rounds, of a diameter of less than 76 mm2United States10.8313.641,259
3United States35.5944.091,239
4United States32.1542.671,327
5United States57.9082.261,421
6United States2.333.261,401
51.1272.001,408
7United States22.6839.501,742
27.0940.131,481
8United States39.6766.271,671
10United States28.9147.611,647
11United States23.6841.591,756
12United States132.18240.451,819
7214990042Other, containing by weight less than 0.25% of carbon: Rounds, of a diameter of 76 mm or more but not exceeding 152 mm5United States1.862.441,312
7214990051Other, containing by weight 0.25% or more but less than 0.6% of carbon: Rounds, of a diameter of less than 76 mm2United States9.2211.321,228
3United States28.0743.591,553
4United States11.5615.501,341
5United States9.4013.671,454
6United States5.457.341,347
7United States2.183.611,656
8United States2.324.632,000
12United States32.4258.191,795
7214990052Other, containing by weight 0.25% or more but less than 0.6% of carbon: Rounds, of a diameter of 76 mm or more but not exceeding 152 mm3United States1.752.341,340
7214990059Other, containing by weight 0.25% or more but less than 0.6% of carbon: Other8United States1.912.811,473
9United States9.0116.721,856
11United States3.666.531,784
12United States1.833.171,731
7216100011Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm - U sections: - American standard1United States7.7210.251,328
2United States20.3126.261,293
4United States16.3122.771,396
5United States6.158.421,370
7United States16.6627.391,644
9United States1.813.041,675
10United States16.9628.651,689
11United States12.6621.901,731
12United States42.7576.621,792
7216210010Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: - L sections - Equal legs1United States94.09116.361,237
2United States141.26174.531,236
3United States11.0415.951,445
53.2872.081,353
4United States179.44230.051,282
5United States0.250.461,847
68.2191.511,342
6United States6.829.551,401
21.2929.011,363
7Korea, Republic of2.175.902,717
United States3.755.491,466
31.9652.721,650
8United States43.9873.961,681
9United States48.1080.721,678
10United States56.9493.771,647
11United States32.1454.861,707
12United States75.82142.441,879
7216310011Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - U sections - Of a height of 80 mm or more but not exceeding 152.4 mm: - American standard1United States21.7831.511,447
2United States59.5982.071,377
3United States19.5429.801,525
4United States68.5596.951,414
5United States11.9018.101,521
98.08146.211,491
6United States11.7616.471,401
50.5571.171,408
7United States3.575.601,567
4.707.141,517
8United States9.6517.101,773
9United States133.87230.041,718
10United States54.53105.291,931
11United States4.357.221,660
12United States56.82106.761,879
7216310019Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - U sections - Of a height of 80 mm or more but not exceeding 152.4 mm: - Other1United States0.521.432,780
2United States0.591.071,803
4United States3.119.032,906
10United States1.645.523,367
7216310021Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - U sections - Of a height exceeding 152.4 mm: - American standard1United States3.564.921,385
3United States5.957.781,307
4United States3.344.151,243
6United States13.4918.001,335
7United States8.3412.811,536
9United States23.6340.161,700
11United States7.3212.611,722
12United States9.3916.411,746
7216310029Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - U sections - Of a height exceeding 152.4 mm: - Other4United States0.300.862,894
5United States10.3029.492,864
8United States0.140.312,251
10United States0.591.752,962
12United States1.092.282,096
7216320020Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - I sections - Of a height exceeding 152.4 mm4United States3.6912.353,349
5United States0.090.141,591
7United States0.341.283,767
10United States0.230.974,229
7216330011Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Wide flange: - Of a height not exceeding 150 mm6United States20.3938.341,880
9United States0.611.131,857
7216330012Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Wide flange: - Of a height exceeding 150 mm but not exceeding 355 mm5United States3.195.491,720
6United States11.2724.172,145
7Japan4.7315.523,279
Korea, Republic of2.345.172,213
United States8.5026.543,124
8Korea, Republic of5.4412.762,345
United States7.2615.952,198
10Korea, Republic of1.783.992,246
United States22.4348.122,145
7216330013Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Wide flange: - Of a height exceeding 355 mm but not exceeding 635 mm3United States6.0213.372,219
4Korea, Republic of2.705.131,902
United States6.1912.762,060
5United States2.584.731,834
7Korea, Republic of2.655.582,102
United States4.4810.152,265
8Korea, Republic of8.4120.342,417
United States5.2011.992,306
10United States5.1711.412,207
7216330020Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Bearing pile1United States1.401.691,208
2United States1.682.001,188
5United States4.637.611,644
6United States3.846.471,685
12United States124.81353.882,835
7216330091Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Other: - Of a height of 80 mm or more but not exceeding 152.4 mm5United States2.403.971,649
6United States3.706.901,865
11United States1.062.332,195
7216330092Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Other: - Of a height exceeding 152.4 mm3United States9.9215.081,520
5United States2.984.651,565
8United States7.1516.052,246
7216400011Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, equal legs: - Of a height of 80 mm or more but not exceeding 152.4 mm1United States45.6257.281,256
2United States33.8343.771,294
3United States2.163.121,445
12.7617.491,371
4United States38.3253.001,383
5United States2.533.661,448
40.3372.821,805
6United States2.793.901,401
52.2073.331,405
7United States2.794.611,654
8United States39.9667.781,696
9United States7.2212.291,702
10United States7.0512.101,715
11United States88.95150.951,697
12United States34.6371.802,073
7216400021Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, unequal legs: - Large leg, of a height of 80 mm or more but not exceeding 152.4 mm1United States20.5827.131,318
2United States6.849.811,434
3United States11.6716.651,427
4United States52.2673.951,415
5United States9.4213.261,408
6United States26.0237.141,427
7United States5.398.471,572
8United States8.2115.541,893
9United States7.2412.691,753
10United States13.7924.161,752
11United States10.3618.041,741
12United States15.6428.781,840
7216400022Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, unequal legs: - Large leg, of a height exceeding 152.4 mm2United States3.705.411,462
9United States3.576.471,812
7216400030Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - T sections8United States4.419.872,239
10United States2.064.432,153
7217100053Wire of iron or non-alloy steel - Not plated or coated, whether or not polished - Other, containing by weight less than 0.25% of carbon: Round, of a diameter of 1.5 mm or more but less than 3 mm3United States10.9720.681,884
7217200043Wire of iron or non-alloy steel - Plated or coated with zinc-aluminum, containing by weight less than 0.25% of carbon: Round, of a diameter of 1.5 mm or more but less than 3 mm2United States4.717.481,589
7217200044Wire of iron or non-alloy steel - Plated or coated with zinc-aluminum, containing by weight less than 0.25% of carbon: Round, of a diameter of 3 mm or more2United States7.4811.881,589
3United States4.487.171,598
7217200099Wire of iron or non-alloy steel - Other, containing by weight 0.6% or more of carbon: Other2United States43.4678.541,807
3United States40.6973.991,819
4United States50.4784.121,667
5United States18.7733.041,760
6United States10.5216.701,588
7United States24.3740.211,650
147.78242.351,640
8United States35.5758.601,648
10United States67.57166.482,464
11United States24.5060.132,454
7225400010Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Heat treated: - Heat treated5United States11.8630.922,608
6United States14.8232.772,211
8United States42.3474.651,763
7225400020Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other, tool steel: - Other, of a width of 600 mm or more but not exceeding 1,525 mm2United States2.673.391,270
4United States17.7839.852,241
7United States4.459.082,044
10United States2.9614.294,824
11Sweden40.9657.401,401
Other, tool steel2United States2.673.391,270
4United States17.7839.852,241
7United States4.459.082,044
10United States2.9614.294,824
11Sweden40.9657.401,401
7225400040Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other, of a width exceeding 1,830 mm but not exceeding 2,450 mm2United States34.4154.911,596
3United States38.1760.441,583
4United States62.60187.492,995
5United States34.2358.861,720
6United States18.2336.441,999
7United States10.6718.721,755
9United States3.566.621,860
7225400050Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other, of a width exceeding 2,450 mm4United States36.2972.481,997
5United States19.2739.992,076
7228300010Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Flat bars1United States35.5644.031,238
3United States2.223.211,445
4.456.301,417
4United States4.546.581,450
5United States11.1117.631,586
7United States7.9213.721,732
8United States6.7611.151,649
9United States4.457.731,739
10Korea, Republic of0.140.402,973
United States5.7210.841,896
12United States1.542.571,662
7228300029Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Rounds: - Other1United States1.942.501,290
5United States4.546.591,452
6United States6.489.011,391
7United States14.0419.761,407
15.4325.981,684
8United States30.6959.891,952
9United States0.441.433,210
10United States81.36131.591,617
11United States17.4428.721,647
12United States16.6736.512,190
7228300090Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other1United States1,455.571,206.91829
2United States881.76894.061,014
3United States429.50461.121,074
4United States16.9618.651,100
1,396.741,492.201,068
5United States135.33158.221,169
1,046.481,140.911,090
6United States60.8465.591,078
601.96677.301,125
7United States48.3857.981,199
616.37756.721,228
8United States1,167.711,498.121,283
9United States546.66748.971,370
10United States943.491,160.201,230
11United States332.93407.531,224
12United States314.31409.001,301
7304190052Of an external diameter exceeding 610 mm: Of an A.P.I. grade greater than X-52 but not exceeding X-658Taiwan0.000.00
United States0.000.00
7304230020Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other drill pipe - Of alloy steel12United States19.6062.173,173
7304290039Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter exceeding 298.5 mm: - Other8United States16.9274.704,415
7306300010Galvanized, of an external diameter not exceeding 114.3 mm:5United States13.3140.983,078
7United States20.5474.863,644
8United States10.5136.253,448
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Galvanized, of an external diameter not exceeding 114.3 mm: - Galvanized, of an external diameter not exceeding 114.3 mm5United States13.3140.983,078
7United States20.5474.863,644
8United States10.5136.253,448
7306300020Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Other, of an external diameter not exceeding 114.3 mm: - Other, of an external diameter not exceeding 114.3 mm2United States6.1211.411,864
3United States0.401.904,715
4United States19.8953.662,697
5United States9.9124.902,512
7United States10.7026.732,499
8United States33.38102.983,086
10United States12.0641.303,424
12United States7.8928.223,578
Other, of an external diameter not exceeding 114.3 mm:2United States6.1211.411,864
3United States0.401.904,715
4United States19.8953.662,697
5United States9.9124.902,512
7United States10.7026.732,499
8United States33.38102.983,086
10United States12.0641.303,424
12United States7.8928.223,578
7306300030Of an external diameter exceeding 114.3 mm:5United States2.076.553,169
9Korea, Republic of14.0647.523,379
United States51.67148.592,876
10United States53.51150.092,805
11United States27.6879.392,868
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Of an external diameter exceeding 114.3 mm: - Of an external diameter exceeding 114.3 mm5United States2.076.553,169
9Korea, Republic of14.0647.523,379
United States51.67148.592,876
10United States53.51150.092,805
11United States27.6879.392,868
7306610010Of iron or non-alloy steel:1United States55.04111.382,023
2United States26.3247.451,803
3United States22.0336.291,648
28.2551.281,815
4United States81.70207.472,540
5Korea, Republic of19.7454.292,750
United States60.06164.102,732
6United States1.214.183,448
40.09117.382,928
7United States20.9263.973,057
8United States139.68421.893,020
10United States42.16135.443,213
11United States2.7210.073,705
12United States31.90118.123,702
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of iron or non-alloy steel: - Of iron or non-alloy steel1United States55.04111.382,023
2United States26.3247.451,803
3United States22.0336.291,648
28.2551.281,815
4United States81.70207.472,540
5Korea, Republic of19.7454.292,750
United States60.06164.102,732
6United States1.214.183,448
40.09117.382,928
7United States20.9263.973,057
8United States139.68421.893,020
10United States42.16135.443,213
11United States2.7210.073,705
12United States31.90118.123,702
7306610020Of alloy steel:3United States3.094.331,401
5United States0.280.963,423
9United States26.5791.133,430
12United States12.2140.713,334
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of alloy steel: - Of alloy steel3United States3.094.331,401
5United States0.280.963,423
9United States26.5791.133,430
12United States12.2140.713,334
7306690020Of alloy steel1United States156.35255.781,636
2United States107.41193.691,803
3United States27.1348.511,788
25.7548.711,892
5United States107.22244.422,279
6United States76.10203.872,679
7United States53.56159.342,975
53.01161.553,048
8United States246.94669.882,713
9United States188.49548.282,909
10United States15.3150.913,324
11United States53.57171.163,195
12United States27.4785.933,129
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of other non-circular cross-section - Of alloy steel: - Of alloy steel1United States156.35255.781,636
2United States107.41193.691,803
3United States27.1348.511,788
25.7548.711,892
5United States107.22244.422,279
6United States76.10203.872,679
7United States53.56159.342,975
53.01161.553,048
8United States246.94669.882,713
9United States188.49548.282,909
10United States15.3150.913,324
11United States53.57171.163,195
12United States27.4785.933,129
7306900010Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other - Of iron or non-alloy steel7United States0.020.062,754
7306900020Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other - Of alloy steel3Korea, Republic of15.9453.983,386
9United States13.1086.596,612
Aldergrove - Total64,728.5782,972.661,282
Argentia7214200000Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling9Turkey6,005.395,726.53954
7304190031Of an external diameter not exceeding 266 mm: Of an A.P.I. grade not exceeding X-5211Romania2.086.753,247
Slovakia0.130.423,186
7306300010Galvanized, of an external diameter not exceeding 114.3 mm:12Turkey245.04359.321,466
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Galvanized, of an external diameter not exceeding 114.3 mm: - Galvanized, of an external diameter not exceeding 114.3 mm12Turkey245.04359.321,466
7306300020Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Other, of an external diameter not exceeding 114.3 mm: - Other, of an external diameter not exceeding 114.3 mm12Turkey1,943.082,917.151,501
Other, of an external diameter not exceeding 114.3 mm:12Turkey1,943.082,917.151,501
7306300030Of an external diameter exceeding 114.3 mm:12Turkey917.431,383.831,508
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Of an external diameter exceeding 114.3 mm: - Of an external diameter exceeding 114.3 mm12Turkey917.431,383.831,508
Argentia - Total12,218.7015,054.301,232
Armstrong7216320010Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - I sections - Of a height of 80 mm or more but not exceeding 152.4 mm9United States19.6225.411,295
7227900090Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Other - Other10United States40.8565.831,612
Other10United States40.8565.831,612
Armstrong - Total101.32157.071,550
Beaver Creek7304240000Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other, of stainless steel7United States5.484.41804
Beaver Creek - Total5.484.41804
Belleville7225400020Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other, tool steel: - Other, of a width of 600 mm or more but not exceeding 1,525 mm2United States0.652.303,526
Other, tool steel2United States0.652.303,526
Belleville - Total1.304.593,526
Boissevain7208510010Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Heat treated5United States19.2733.151,720
7210700000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Painted, varnished or coated with plastics3United States0.110.393,538
5United States0.850.38452
7214910010Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Of a width not exceeding 75 mm1United States28.2333.861,200
7214910011Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section -Containing by weight less than 0.25% of carbon: Of a width not exceeding 76 mm3United States13.0317.341,331
4United States10.6014.841,401
6United States12.8117.711,382
9United States1.852.911,574
11United States3.766.431,709
7214910012Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon: Of a width exceeding 76 mm but less than 152 mm4United States2.162.751,274
9United States3.555.291,490
7214910013Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon: Of a width of 152 mm or more9United States7.0411.481,631
11United States14.8226.261,772
7214910020Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Of a width exceeding 75 mm but less than 150 mm1United States28.8534.931,210
7214910021Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon: Of a width not exceeding 76 mm2United States11.1013.491,215
3United States24.0029.921,246
7United States2.203.351,525
7214910022Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon: Of a width exceeding 76 mm but less than 152 mm11United States7.5312.621,677
7214910023Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon: Of a width of 152 mm or more8United States5.6110.991,958
7214910030Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Of a width of 150 mm or more1United States2.222.791,256
7214990020Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Hexagons6United States2.222.621,178
7214990030Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Squares4United States1.702.671,572
5United States20.0434.551,724
7214990041Other, containing by weight less than 0.25% of carbon: Rounds, of a diameter of less than 76 mm2United States8.7311.181,281
3United States1.913.111,629
4United States19.7125.161,277
6United States4.355.781,330
11United States2.183.931,799
7214990042Other, containing by weight less than 0.25% of carbon: Rounds, of a diameter of 76 mm or more but not exceeding 152 mm12United States2.223.351,509
7214990059Other, containing by weight 0.25% or more but less than 0.6% of carbon: Other4United States2.182.871,314
7214990060Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Other, containing by weight 0.25% or more but less than 0.6% of carbon: Other, containing by weight 0.6% or more of carbon3United States8.6610.791,246
7United States8.6813.291,531
7216100011Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm - U sections: - American standard1United States22.3327.121,214
2United States27.4834.111,241
3United States21.3426.631,248
52.4466.461,267
4United States18.6024.081,295
5United States22.1727.641,247
13.1316.641,267
6United States16.7824.401,454
37.8352.081,377
7United States36.5452.691,442
8United States13.0221.461,649
9United States33.2051.581,553
10United States29.9148.191,611
11United States16.4527.021,642
12United States32.8355.551,692
7216210010Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: - L sections - Equal legs1United States13.3516.311,222
2United States11.1214.091,267
3United States24.6033.971,381
4United States14.7720.141,363
5United States4.526.051,339
6United States2.262.881,278
6.648.531,285
7United States104.57137.261,313
8United States8.8413.971,581
9United States4.527.631,688
10United States10.9110.81991
11United States2.263.791,675
12United States6.6511.261,693
7216310011Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - U sections - Of a height of 80 mm or more but not exceeding 152.4 mm: - American standard1United States68.9488.491,284
2United States33.5643.161,286
3United States28.5738.581,350
4United States49.6074.241,497
5United States25.6133.161,295
6United States65.1090.361,388
7United States21.5437.161,725
8United States24.0940.691,689
9United States36.4358.861,616
10United States32.0953.001,652
11United States19.6532.711,665
12United States40.3669.861,731
7216310021Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - U sections - Of a height exceeding 152.4 mm: - American standard1United States10.6713.451,261
2United States7.519.341,243
3United States1.672.081,243
5United States21.7029.661,367
8United States12.3821.291,720
9United States15.3125.511,667
10United States2.504.001,598
12United States1.672.831,695
7216330012Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Wide flange: - Of a height exceeding 150 mm but not exceeding 355 mm1United States22.2428.331,274
4United States21.4329.541,378
6United States42.1260.241,430
8United States15.6729.191,862
9United States21.9133.391,524
10United States44.4084.381,900
7216400011Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, equal legs: - Of a height of 80 mm or more but not exceeding 152.4 mm1United States10.6712.321,155
4United States3.555.701,607
6United States2.773.711,337
10United States18.5019.001,027
7216400021Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, unequal legs: - Large leg, of a height of 80 mm or more but not exceeding 152.4 mm2United States2.152.471,150
4United States1.843.021,640
9United States3.315.361,617
10United States9.0110.801,199
11United States3.596.181,720
7225400020Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other, tool steel: - Other, of a width of 600 mm or more but not exceeding 1,525 mm3United States44.1044.581,011
Other, tool steel3United States44.1044.581,011
7226920000Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Other: - Not further worked than cold-rolled (cold-reduced)4United States0.351.624,569
7227900083Other, of a circular cross-section: Of a diameter of 19 mm or more8United States47.6994.581,983
7304190041Of an external diameter exceeding 266 mm but not exceeding 610 mm: Of an A.P.I. grade not exceeding X-5210United States17.8776.404,276
7304190059Of an external diameter exceeding 610 mm: Other3United States20.688.39405
7304220000Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Drill pipe of stainless steel1United States70.7640.00565
2United States23.5913.84587
3United States21.7717.34797
4United States45.3623.33514
5United States23.5915.35651
6United States63.5034.24539
7United States23.5916.56702
137.8993.69679
8United States90.2660.31668
9United States1.633.081,893
7304230020Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other drill pipe - Of alloy steel1United States0.230.723,158
2United States20.418.88435
6United States1.505.213,474
7306190090Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Line pipe of a kind used for oil or gas pipelines: - Other - Other2Japan10.7222.892,135
6United States18.3647.882,608
7306290019Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Casing and tubing of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter exceeding 114.3 mm but not exceeding 177.8 mm: - Other2United States43.4842.29973
4United States19.4621.671,114
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Casing and tubing of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter of 114.3 mm or more but not exceeding 177.8 mm: - Other2United States43.4842.29973
4United States19.4621.671,114
7306300020Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Other, of an external diameter not exceeding 114.3 mm: - Other, of an external diameter not exceeding 114.3 mm9United States0.361.273,519
10United States19.9959.192,962
Other, of an external diameter not exceeding 114.3 mm:9United States0.361.273,519
10United States19.9959.192,962
7306300030Of an external diameter exceeding 114.3 mm:2United States19.4337.921,952
6United States6.8126.373,873
7United States20.4089.204,373
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Of an external diameter exceeding 114.3 mm: - Of an external diameter exceeding 114.3 mm2United States19.4337.921,952
6United States6.8126.373,873
7United States20.4089.204,373
Boissevain - Total2,621.143,573.901,363
Boundary Bay7304190052Of an external diameter exceeding 610 mm: Of an A.P.I. grade greater than X-52 but not exceeding X-6512Haiti0.000.024,408
Boundary Bay - Total0.000.024,408
Brampton7211900000Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Other8Germany0.000.08
7228600000Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods2France0.000.002,490
Brampton - Total0.000.0943,645
Calgary7208400000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Not in coils, not further worked than hot-rolled, with patterns in relief7China19.5422.321,142
Not in coils, not further worked than hot-rolled, with patterns in relief7China19.5422.321,142
7208510010Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Heat treated9China0.030.103,804
7208510091Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other: - Of a width of 600 mm or more but not exceeding 1,525 mm1United States6.525.90905
5United States47.8470.341,470
7208510092Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other: - Of a width exceeding 1,525 mm but not exceeding 1,830 mm1United States29.0122.86788
2United States6.004.89814
3United States37.6847.321,256
4United States10.6714.761,383
5United States36.6752.731,438
6United States22.6732.961,454
72.0299.821,386
7United States66.69110.721,660
8United States26.0036.771,414
10United States5.3411.352,127
11United States55.35117.132,116
12United States28.0161.632,201
7208510093Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other: - Of a width exceeding 1,830 mm but not exceeding 2,450 mm1United States218.81175.49802
USIA85.6670.48823
2United States383.71391.861,021
3United States264.08322.241,220
4United States94.81132.801,401
5United States260.36341.901,313
6United States42.3861.741,457
271.56480.171,768
7United States87.72137.901,572
8United States216.65363.121,676
9United States148.48277.221,867
10United States104.64233.132,228
11United States361.26751.732,081
12United States153.38336.162,192
7208510094Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other: - Of a width exceeding 2,450 mm but not exceeding 3,050 mm1United States182.87208.481,140
USIA22.2318.17817
2United States29.6424.12814
3United States201.36232.621,155
4United States86.14120.291,396
5United States193.65237.591,227
6United States59.2887.191,471
153.22272.911,781
7United States11.1116.301,467
8United States69.56161.102,316
9United States332.75802.862,413
10United States284.56643.292,261
11United States302.55759.162,509
12United States20.3844.382,178
7208520091Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Other: - Of a width of 600 mm or more but not exceeding 1,525 mm1United States15.7714.27905
5United States18.2929.741,626
Of a width of 600 mm or more but not exceeding 1,525 mm1United States15.7714.27905
5United States18.2929.741,626
7208520092Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Other: - Of a width exceeding 1,525 mm but not exceeding 1,830 mm1United States47.5443.01905
4United States20.4257.762,829
10United States17.3436.962,132
11United States9.3419.832,124
12United States18.3540.782,222
7208520093Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Other: - Of a width exceeding 1,830 mm but not exceeding 2,450 mm1United States129.16113.79881
USIA19.1116.19847
2United States21.3434.841,633
3United States267.61255.58955
4United States145.61210.561,446
5United States128.48179.721,399
6United States58.5987.651,496
40.4159.951,484
7United States87.90137.631,566
8United States107.60168.941,570
9United States9.7817.551,795
10United States13.1324.941,899
11United States442.16756.821,712
12United States82.83184.822,231
7208520096Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Other: - Of a width exceeding 2,450 mm1United States9.268.10874
USIA16.6715.41925
2United States36.1236.111,000
4United States30.1341.141,365
5United States17.6022.661,287
6United States59.5187.161,465
8United States20.3830.561,500
9United States19.7721.951,110
12United States37.5182.222,192
7210110000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Plated or coated with tin: - Of a thickness of 0.5 mm or more2United States0.050.183,274
12China2.384.101,719
7210300000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Electrolytically plated or coated with zinc1China3.606.601,830
2China29.5967.202,271
3China13.5527.182,005
5China24.8856.512,271
6China3.237.952,464
8China4.6016.283,542
9China16.1639.972,474
10China7.8421.242,707
11China35.22109.793,117
12Sweden0.010.011,299
7210410000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Corrugated6China26.3447.931,820
7210490010Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other - Of a thickness not exceeding 0.5 mm1China166.75176.571,059
5China21.4132.771,530
6China28.7648.771,696
7210490030Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other - Of a thickness exceeding 1 mm1China11.8720.111,694
2China7.1713.241,846
3China10.5818.501,749
5China31.8664.862,036
6China4.968.021,618
9China1.112.752,484
10China2.424.972,057
11China31.3172.682,321
12China3.5710.773,015
7210700000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Painted, varnished or coated with plastics1United States1.003.993,995
2United States0.211.004,764
4Greece59.2692.381,559
Netherlands24.3678.383,217
5Netherlands77.34247.703,203
6China12.3937.573,032
8Netherlands39.8394.202,365
9Netherlands78.39287.293,665
7211230000Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than cold-rolled (cold-reduced): - Containing by weight less than 0.25% of carbon10China0.010.012,138
7212300040Of a thickness exceeding 1 mm4China22.4527.111,208
12China19.1133.601,758
7212400090Plated or coated with zinc: other3United States0.010.00376
5Korea, Republic of20.3727.591,354
8United States0.000.002,517
9China19.6227.861,420
11Macedonia0.010.033,284
12United States4.5916.233,539
7214200000Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling1United States91.5666.50726
6United States442.41488.961,105
8Mexico1,412.982,054.501,454
9Mexico1,556.162,325.371,494
10Mexico254.34380.721,497
7214910011Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section -Containing by weight less than 0.25% of carbon: Of a width not exceeding 76 mm8China4.986.781,362
7214990030Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Squares12Netherlands2.001.69847
7216100019Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm - U sections: - Other2China16.4326.301,601
4China19.7430.691,555
7216210010Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: - L sections - Equal legs6Mexico28.2034.911,238
7216310011Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - U sections - Of a height of 80 mm or more but not exceeding 152.4 mm: - American standard5United States44.8146.461,037
6Mexico28.2029.251,037
7216310021Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - U sections - Of a height exceeding 152.4 mm: - American standard9United States20.3036.281,787
12United States11.0727.252,461
7216310029Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - U sections - Of a height exceeding 152.4 mm: - Other5United States9.019.891,097
7216320010Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - I sections - Of a height of 80 mm or more but not exceeding 152.4 mm3United States3.466.261,808
5United States23.4735.441,510
7United States7.8214.031,793
9United States20.7739.111,883
7216320020Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - I sections - Of a height exceeding 152.4 mm1United States3.403.411,003
4United States10.5615.081,428
5United States23.3733.631,439
6United States3.345.121,532
7United States34.4366.471,931
8United States6.6812.491,870
9United States10.3925.482,454
11United States75.58157.012,077
12United States53.95122.742,275
7216330011Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Wide flange: - Of a height not exceeding 150 mm1United States82.3069.54845
5United States27.4929.041,057
7United States4.086.651,629
7216330012Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Wide flange: - Of a height exceeding 150 mm but not exceeding 355 mm1United States919.96774.56842
USTX42.4032.63770
2United States151.22116.67772
3United States189.57156.32825
125.90148.151,177
4United States417.39344.64826
5United States73.5258.17791
344.23289.91842
6United States171.41237.241,384
7United States231.13290.101,255
8United States815.141,126.041,381
9United States269.57389.481,445
10United States234.61433.751,849
11United States70.23130.551,859
12United States96.93194.432,006
7216330013Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Wide flange: - Of a height exceeding 355 mm but not exceeding 635 mm1United States108.8488.90817
USTX33.5125.79770
2United States68.9552.73765
3United States36.2930.59843
99.3677.01775
4United States254.86319.181,252
5United States162.95174.001,068
6United States146.05154.361,057
7United States79.43125.711,583
8United States32.2952.771,634
9United States218.41397.071,818
10United States190.22347.811,828
11United States80.22159.011,982
12United States43.5286.151,980
7216330014Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Wide flange: - Of a height exceeding 635 mm1United States38.5437.39970
4United States77.68123.491,590
5United States52.6278.111,484
6United States77.07143.901,867
7United States73.16134.931,844
11United States75.08148.481,978
7216330020Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Bearing pile7United States193.18286.431,483
7216330091Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Other: - Of a height of 80 mm or more but not exceeding 152.4 mm1United States82.3070.26854
7216330092Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Other: - Of a height exceeding 152.4 mm7United States49.9079.411,591
7216400022Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, unequal legs: - Large leg, of a height exceeding 152.4 mm6Mexico28.2028.01993
7217100041Wire of iron or non-alloy steel - Not plated or coated, whether or not polished - Round, heat treated, containing by weight less than 0.25% of carbon: Of a diameter of less than 1.5 mm, in coils weighing not more than 2 kg4China21.2824.551,154
11China0.310.652,073
United States0.371.584,269
7217100054Wire of iron or non-alloy steel - Not plated or coated, whether or not polished - Other, containing by weight less than 0.25% of carbon: Round, of a diameter of 3 mm or more8Italy24.7847.661,923
7217100059Wire of iron or non-alloy steel - Not plated or coated, whether or not polished - Other, containing by weight less than 0.25% of carbon: Other2Korea, Republic of34.3160.361,759
3Korea, Republic of102.80184.591,796
4Korea, Republic of16.9333.611,985
5Korea, Republic of144.10205.391,425
6Korea, Republic of33.8768.782,030
8Korea, Republic of15.9133.022,075
9Korea, Republic of33.9790.612,667
11Korea, Republic of68.64186.862,722
12Korea, Republic of68.19197.152,891
7217200010Containing by weight less than 0.25% of carbon:4China42.8953.261,242
5China171.57221.521,291
11Turkey47.9474.761,559
Wire of iron or non-alloy steel - Plated or coated with zinc - Flat4China42.8953.261,242
5China171.57221.521,291
11Turkey47.9474.761,559
7217200073Wire of iron or non-alloy steel - Other, containing by weight less than 0.25% of carbon: Round, of a diameter of 1.5 mm or more but less than 3 mm8ChinaCN19.5130.541,565
12QatarQA19.0536.331,907
7217200074Wire of iron or non-alloy steel - Other, containing by weight less than 0.25% of carbon: Round, of a diameter of 3 mm or more8China20.0060.483,024
9China26.0081.653,140
7217200099Wire of iron or non-alloy steel - Other, containing by weight 0.6% or more of carbon: Other5China0.470.851,807
6China0.290.551,886
7217300034Wire of iron or non-alloy steel - Plated or coated with other base metals -Other, containing by weight 0.25% or more but less than 0.6% of carbon: Round, of a diameter of 3 mm or more2Korea, Republic of16.7625.191,503
3Korea, Republic of49.8074.881,504
4Korea, Republic of16.7131.611,892
5Korea, Republic of49.9997.011,941
6Korea, Republic of33.3464.111,923
7Korea, Republic of66.60142.202,135
8Korea, Republic of33.3978.902,363
9Korea, Republic of16.4438.962,369
10Korea, Republic of16.8140.162,389
12Korea, Republic of33.3485.152,554
7217900020Wire of iron or non-alloy steel - Plated or coated with other base metals -Other - Coated with plastics4China21.4830.821,435
5China21.4833.721,570
7217900091Wire of iron or non-alloy steel - Plated or coated with other base metals -Other - Containing by weight less than 0.25% of carbon5Hong Kong26.5034.781,313
7217900093Wire of iron or non-alloy steel - Plated or coated with other base metals - Other -Containing by weight 0.6% or more of carbon12United States13.5354.514,028
7218990090Stainless steel in ingots or other primary forms; semi-finished products of stainless steel. - Other: - Other - Other5France8.9910.891,211
7225400010Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Heat treated: - Heat treated1United States116.93148.051,266
4United States18.5231.641,708
6United States280.95467.221,663
7United States175.14310.811,775
9United States160.03332.722,079
10United States402.91890.642,211
7225400030Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other, of a width exceeding 1,525 mm but not exceeding 1,830 mm5United States26.6826.25984
6United States1.001.481,479
7225400040Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other, of a width exceeding 1,830 mm but not exceeding 2,450 mm3United States5.567.841,412
4United States4.187.981,908
8United States15.1123.041,524
9United States8.8916.931,905
10United States38.9482.832,127
11United States20.5338.941,897
7225400050Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other, of a width exceeding 2,450 mm5United States115.6497.52843
7226200000Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Of high speed steel9United States157.11192.321,224
7227900083Other, of a circular cross-section: Of a diameter of 19 mm or more6United States85.22134.111,574
7228300010Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Flat bars1United States435.39411.77946
2China52.3649.92953
United States90.5685.59945
3United States176.04177.081,006
4United States795.18859.241,081
5United States88.2592.331,046
6United States563.74841.211,492
7United States256.30401.551,567
8United States304.40501.631,648
9United States430.27684.871,592
10United States88.31135.761,537
7228300029Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Rounds: - Other9United States1.264.493,554
7228300090Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other6United States215.34248.951,156
7228600000Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods2United States0.000.003,360
9United States21.2165.603,093
7304110000Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Line pipe of a kind used for oil or gas pipelines: - Of stainless steel2China1.500.95635
3Taiwan21.1065.723,115
7United States0.180.251,354
10China0.040.03632
Taiwan35.10125.913,587
7304190059Of an external diameter exceeding 610 mm: Other12India25.7254.192,107
7304290011Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter exceeding 114.3 mm but not exceeding 177.8 mm: - Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary specification4Norway1.205.014,173
7304290039Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter exceeding 298.5 mm: - Other3Austria6.0230.064,989
7304410010MECHANICAL TUBES&PIPES, SS, COLD WORKED, CIRC CROSS-SECT    3United Kingdom0.000.46
Other, of circular cross-section, of stainless steel: - Cold-drawn or cold-rolled (cold-reduced) - Of an external diameter of less than 19 mm3United Kingdom0.000.46
7304410090OTHER SS TUBES&PIPES, COLD WORKED, CIRC CROSS-SECTION       5China0.000.00
Other, of circular cross-section, of stainless steel: - Cold-drawn or cold-rolled (cold-reduced) - Other5China0.000.00
7305110049Of an external diameter exceeding 610 mm: Other4United States3,642.715,059.651,389
5United States76.45104.561,368
11,263.3315,339.981,362
6United States13,409.9917,930.291,337
7United States14,477.5919,854.341,371
8United States2,020.073,036.531,503
7306190010Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Line pipe of a kind used for oil or gas pipelines: - Other - Of an A.P.I. grade not exceeding X-523India25.1725.371,008
IN125.55126.581,008
7306290061Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Casing and tubing of a kind used in drilling for oil or gas: - Other - Tubing: - Of an A.P.I. grade H-40, J-55 or equivalent proprietary specification4China49.70109.912,212
7306300010Galvanized, of an external diameter not exceeding 114.3 mm:2Indonesia401.07370.36923
3China79.02131.021,658
5China79.33141.271,781
6China184.92375.252,029
7China290.44635.802,189
132.31259.541,962
8China195.39402.052,058
Germany1.273.812,995
Turkey48.9852.561,073
9China313.79732.412,334
10China100.43235.752,347
11China264.20635.752,406
12China19.4845.192,319
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Galvanized, of an external diameter not exceeding 114.3 mm: - Galvanized, of an external diameter not exceeding 114.3 mm2Indonesia401.07370.36923
3China79.02131.021,658
5China79.33141.271,781
6China184.92375.252,029
7China290.44635.802,189
132.31259.541,962
8China195.39402.052,058
Germany1.273.812,995
Turkey48.9852.561,073
9China313.79732.412,334
10China100.43235.752,347
11China264.20635.752,406
12China19.4845.192,319
7306300020Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Other, of an external diameter not exceeding 114.3 mm: - Other, of an external diameter not exceeding 114.3 mm1China192.51158.65824
2China140.57175.611,249
United States0.190.693,608
3China119.57100.95844
4China340.05516.611,519
United States0.150.644,275
5China205.62268.371,305
Indonesia16.5517.001,027
6China510.42534.021,046
Indonesia11.2111.571,031
7China49.0456.541,153
393.68512.611,302
GermanyDE0.060.182,765
Indonesia29.3729.28997
8China55.0472.661,320
Indonesia28.3028.05991
Turkey18.4420.001,085
9Indonesia103.84135.321,303
Turkey24.3026.711,099
11Indonesia179.91242.021,345
12China170.27248.641,460
Turkey26.5028.391,071
Other, of an external diameter not exceeding 114.3 mm:1China192.51158.65824
2China140.57175.611,249
United States0.190.693,608
3China119.57100.95844
4China340.05516.611,519
United States0.150.644,275
5China205.62268.371,305
Indonesia16.5517.001,027
6China510.42534.021,046
Indonesia11.2111.571,031
7China49.0456.541,153
393.68512.611,302
GermanyDE0.060.182,765
Indonesia29.3729.28997
8China55.0472.661,320
Indonesia28.3028.05991
Turkey18.4420.001,085
9Indonesia103.84135.321,303
Turkey24.3026.711,099
11Indonesia179.91242.021,345
12China170.27248.641,460
Turkey26.5028.391,071
7306300030Of an external diameter exceeding 114.3 mm:2United States0.060.284,371
4Netherlands47.35152.593,223
5Indonesia67.1869.871,040
Netherlands18.2242.542,335
6Indonesia71.6074.761,044
Netherlands4.5911.722,555
7Indonesia55.2555.741,009
8Indonesia56.1356.311,003
Turkey5.786.281,086
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Of an external diameter exceeding 114.3 mm: - Of an external diameter exceeding 114.3 mm2United States0.060.284,371
4Netherlands47.35152.593,223
5Indonesia67.1869.871,040
Netherlands18.2242.542,335
6Indonesia71.6074.761,044
Netherlands4.5911.722,555
7Indonesia55.2555.741,009
8Indonesia56.1356.311,003
Turkey5.786.281,086
7306500000Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of other alloy steel5Netherlands12.005.50458
7306610010Of iron or non-alloy steel:3Pakistan23.0523.441,017
7Vietnam9.3139.634,258
8China4.1416.724,041
10China50.9861.211,201
11China26.4930.891,166
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of iron or non-alloy steel: - Of iron or non-alloy steel3Pakistan23.0523.441,017
7Vietnam9.3139.634,258
8China4.1416.724,041
10China50.9861.211,201
11China26.4930.891,166
7306610020Of alloy steel:1China22.7020.00881
2China24.9923.46939
4China24.9426.591,066
6China97.68102.791,052
8China12.3517.411,409
United States163.81488.062,979
9China11.8716.801,415
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of alloy steel: - Of alloy steel1China22.7020.00881
2China24.9923.46939
4China24.9426.591,066
6China97.68102.791,052
8China12.3517.411,409
United States163.81488.062,979
9China11.8716.801,415
7306690010Of iron or non-alloy steel8China16.1530.451,885
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of other non-circular cross-section - Of iron or non-alloy steel: - Of iron or non-alloy steel8China16.1530.451,885
7306900010Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other - Of iron or non-alloy steel1China680.30647.74952
3China25.0722.14883
4China342.59299.81875
5China402.65561.041,393
6China190.73315.431,654
7China79.4092.281,162
48.7852.691,080
8China242.53375.471,548
12China0.000.01
7306900020Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other - Of alloy steel5Denmark0.010.023,160
Calgary - Total83,811.27118,969.361,419
Cambridge7210120000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Plated or coated with tin: - Of a thickness of less than 0.5 mm1Germany18.1528.791,586
7217300039Wire of iron or non-alloy steel - Plated or coated with other base metals -Other, containing by weight 0.25% or more but less than 0.6% of carbon: Other2United States0.060.101,575
7306500000Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of other alloy steel11United States4.3716.073,679
Cambridge - Total22.5844.961,991
Campobello7306190010Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Line pipe of a kind used for oil or gas pipelines: - Other - Of an A.P.I. grade not exceeding X-524United States0.030.082,397
Campobello - Total0.030.082,397
Carway7213100000Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Containing indentations, ribs, grooves or other deformations produced during the rolling process1United States27.3222.70831
Carway - Total27.3222.70831
Chicoutimi7226110000Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Of silicon-electrical steel: - Grain-oriented6China96.20272.432,832
Chicoutimi - Total96.20272.432,832
Cornwall7208520010Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Heat treated2United StatesUSNY12.8722.491,747
3United StatesUSNY4.5211.732,597
4United StatesUSNY11.5833.332,878
6United StatesUSNY18.5243.932,372
8United StatesUSNY18.8957.393,038
9United StatesUSNY31.7390.682,858
11United StatesUSNY57.18173.323,031
12United StatesUSNY31.3187.752,803
Heat treated2United StatesUSNY12.8722.491,747
3United StatesUSNY4.5211.732,597
4United StatesUSNY11.5833.332,878
6United StatesUSNY18.5243.932,372
8United StatesUSNY18.8957.393,038
9United StatesUSNY31.7390.682,858
11United StatesUSNY57.18173.323,031
12United StatesUSNY31.3187.752,803
7214990030Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Squares8United States34.1039.811,168
7225400050Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other, of a width exceeding 2,450 mm6United States20.4114.46708
7228300090Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other7United States32.9147.991,458
7228600000Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods7China0.010.032,800
7306190090Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Line pipe of a kind used for oil or gas pipelines: - Other - Other3United States156.69142.50909
9United States20.4138.691,895
10United States33.4839.581,183
7306300020Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Other, of an external diameter not exceeding 114.3 mm: - Other, of an external diameter not exceeding 114.3 mm9United States19.3254.012,796
11United States0.120.07601
Other, of an external diameter not exceeding 114.3 mm:9United States19.3254.012,796
11United States0.120.07601
7306900010Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other - Of iron or non-alloy steel10United States31.04102.583,304
11United States15.9063.423,988
12United States16.7253.573,204
7306900020Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other - Of alloy steel1United States38.53145.473,776
2United States11.7949.664,211
3United States3.7415.474,137
53.28145.732,735
4United States9.8537.983,856
5United States26.2899.623,790
6United States4.0716.534,062
22.7383.533,675
7United States10.0538.633,844
8United States17.3472.374,172
9United States29.77112.923,793
11United States7.0327.163,862
12United States14.8259.614,022
Cornwall - Total1,023.022,596.722,538
Coutts7208100000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - In coils, not further worked than hot-rolled, with patterns in relief11United States79.4187.011,096
7208360000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm6China0.100.272,723
7208390000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of less than 3 mm6United States4.2915.563,630
7208400000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Not in coils, not further worked than hot-rolled, with patterns in relief4United States0.743.584,834
Not in coils, not further worked than hot-rolled, with patterns in relief4United States0.743.584,834
7208510010Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Heat treated2United States7.4924.513,271
5United States1.255.244,179
6United States6.8923.853,459
10United States0.743.034,082
12United States0.100.504,876
7208510091Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other: - Of a width of 600 mm or more but not exceeding 1,525 mm10United States1.215.624,641
7208510093Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other: - Of a width exceeding 1,830 mm but not exceeding 2,450 mm3United States2.966.632,236
4United States1.305.484,225
7208510094Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other: - Of a width exceeding 2,450 mm but not exceeding 3,050 mm2United States0.110.312,797
7208510095Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other: - Of a width exceeding 3,050 mm6United States4.4511.142,506
7208520010Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Heat treated11Ukraine0.641.943,029
Heat treated11Ukraine0.641.943,029
7208520091Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Other: - Of a width of 600 mm or more but not exceeding 1,525 mm3United States0.230.743,244
10United States0.893.694,156
11United States0.431.924,462
Of a width of 600 mm or more but not exceeding 1,525 mm3United States0.230.743,244
10United States0.893.694,156
11United States0.431.924,462
7209900000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - Other3United States0.400.33826
7210110000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Plated or coated with tin: - Of a thickness of 0.5 mm or more1United States0.040.184,532
7210300000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Electrolytically plated or coated with zinc8United States14.4051.573,581
7210490020Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other - Of a thickness exceeding 0.5 mm but not exceeding 1 mm1United States368.62635.521,724
Vietnam4.419.962,258
2United States303.67753.682,482
Vietnam3.497.772,228
3United States97.39195.842,011
4United States60.90123.592,030
5United States216.08406.571,882
6United States76.68136.601,781
7210490030Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other - Of a thickness exceeding 1 mm1Korea, Republic of8.5718.132,115
Vietnam32.7169.172,115
2China2.475.392,185
Korea, Republic of14.0431.372,234
United States39.1191.102,329
Vietnam16.9136.872,181
3Korea, Republic of16.5637.352,255
170.33383.802,253
United States87.45198.962,275
7210700000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Painted, varnished or coated with plastics1United States0.572.404,203
2.9711.513,870
3United States0.330.331,005
3.4415.524,507
6United States20.9260.432,889
9United States0.521.993,833
10United States9.212.52273
11United States5.1019.103,747
12United States4.059.342,305
7211130000Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief1United States0.060.213,419
7211140010Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Other, of a thickness of 4.75 mm or more - Not in coils1United States2.2810.004,388
12United States1.868.274,435
7211190010Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Other - Not in coils3United States1.034.914,767
7United States0.140.443,263
7211190090Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Other - Other1United States3.308.382,542
7211230000Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than cold-rolled (cold-reduced): - Containing by weight less than 0.25% of carbon7United States0.160.412,659
11United States0.922.262,464
7211900000Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Other1China0.040.194,641
Vietnam0.050.112,351
2United States7.5814.201,873
Vietnam0.731.712,357
3United States0.771.962,538
Vietnam0.541.262,319
4United States0.953.343,502
5United States0.180.583,186
7United States0.451.733,811
Vietnam0.541.472,706
8United States0.451.753,858
9United States0.090.394,299
10United States0.090.414,528
Vietnam0.050.173,855
11United States0.592.784,720
12United States1.004.834,842
7212200010Of a thickness less than 0.25 mm5China0.000.004,600
7213100000Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Containing indentations, ribs, grooves or other deformations produced during the rolling process1United States27.3622.59826
7213200090Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other, of free-cutting steel - Other6United States1.164.323,740
Other6United States1.164.323,740
7213910011Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Of circular cross-section measuring less than 14 mm in diameter - Containing by weight less than 0.25% of carbon: - Wire rods1United States38.7043.221,117
2United States19.2721.591,120
7213910050Other, containing by weight less than 0.25% of carbon2United States57.8164.911,123
3United States115.72125.311,083
7214100000Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Forged5China7.1316.832,361
9Italy0.200.723,676
10United States1.233.552,885
12Korea, Republic of1.784.842,713
Mexico1.293.782,920
United States5.2514.792,820
7214200000Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling3United States18.7417.92956
4United States18.8117.89951
8United States19.7824.661,246
9United States19.3524.971,290
10United States0.702.824,032
7214300090Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Other3United States5.487.941,449
0.280.501,775
4United States18.3126.451,444
6Saudi Arabia15.9132.082,016
United States1.812.841,563
18.5125.911,399
7United States5.528.641,565
9United States5.4210.021,848
10United States1.793.191,779
11United States7.4612.801,716
12United States2.204.622,101
7214910010Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Of a width not exceeding 75 mm1United States5.486.111,117
207.24250.921,211
2United States14.8824.351,636
7214910011Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section -Containing by weight less than 0.25% of carbon: Of a width not exceeding 76 mm2United States45.4855.901,229
3Italy1.402.741,955
United States65.0685.631,316
455.89588.231,290
4United States472.06578.081,225
5United States226.96261.881,154
6United States9.1114.051,543
97.98137.781,406
7United States10.9217.461,599
165.48252.181,524
8United States138.82218.051,571
9United States364.48580.701,593
10United States401.64646.251,609
11United States90.94158.201,740
12United States545.76822.431,507
7214910012Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon: Of a width exceeding 76 mm but less than 152 mm2United States63.6483.821,317
3United States1.852.361,276
25.3836.111,423
4United States30.1041.401,375
5United States44.2961.461,388
6United States5.428.621,590
62.0389.791,448
7United States12.6718.671,473
45.7266.831,462
8United States11.1417.351,558
9United States100.47166.091,653
10United States30.8852.371,696
11United States72.31119.471,652
12United States25.5243.231,694
7214910013Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon: Of a width of 152 mm or more2United States84.90110.121,297
3United States9.1412.331,348
155.31207.291,335
4United States155.04211.801,366
5United States124.18176.281,420
6United States5.358.021,499
50.3673.411,458
7United States1.812.881,594
63.5096.241,516
8United States163.89267.271,631
9United States118.71198.491,672
10United States73.09126.401,730
11United States281.34482.441,715
12United States72.77130.451,793
7214910020Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Of a width exceeding 75 mm but less than 150 mm1United States7.318.371,146
163.70196.031,197
2United States4.278.852,074
7214910021Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon: Of a width not exceeding 76 mm2United States9.1712.411,353
3United States23.9431.381,311
96.48131.291,361
4United States17.8725.301,416
5United States26.5043.561,643
6United States72.33105.311,456
7United States16.4125.191,535
36.7352.351,425
8United States9.3315.191,629
9United States96.84160.161,654
10United States70.55109.081,546
11United States110.85190.231,716
12United States32.8560.341,837
7214910022Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon: Of a width exceeding 76 mm but less than 152 mm2United States1.311.631,246
3United States1.852.411,299
1.852.331,257
4United States1.852.301,243
6United States16.8123.701,410
9United States28.4447.201,660
10United States9.2815.361,654
11United States5.569.691,743
7214910023Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon: Of a width of 152 mm or more2United States3.474.531,305
7214910030Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Of a width of 150 mm or more1United States27.6934.711,253
262.98285.151,084
2United States13.6219.961,466
7214910031Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.6% or more of carbon: Of a width not exceeding 76 mm2United States38.4047.661,241
3United States9.1312.221,338
4United States80.92109.981,359
5United States50.8672.201,420
6United States75.09104.541,392
7United States9.0313.031,443
12.7618.501,450
8United States62.42107.321,719
9United States57.2896.471,684
10United States48.2083.401,730
11United States133.04227.041,707
12United States28.9849.751,717
7214910033Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.6% or more of carbon: Of a width of 152 mm or more2United States1.812.281,263
4United States18.4325.111,363
6United States21.6732.081,480
10United States3.705.831,574
7214990011Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Rounds: - Of a diameter not exceeding 75 mm1United States45.4652.611,157
2United States5.316.841,290
7214990020Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Hexagons3United States1.912.461,290
4United States1.942.541,312
5United States14.6523.611,611
7United States1.802.651,473
3.625.331,473
8United States50.8371.111,399
9United States3.565.871,647
10United States0.532.454,597
7214990030Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Squares1United States28.6739.551,379
2United States21.6028.431,316
3United States5.036.361,265
69.8083.091,190
4United States27.3634.801,272
5United States30.2040.621,345
7United States17.6531.791,802
19.6627.061,376
8United States91.08134.221,474
9United States20.8433.511,608
10United States12.1320.421,683
11United States93.85162.591,732
12United States3.546.121,727
7214990041Other, containing by weight less than 0.25% of carbon: Rounds, of a diameter of less than 76 mm2United States152.60192.201,260
3United States16.6722.101,326
20.3826.721,311
4United States62.6982.151,311
5United States215.10272.791,268
6United States1.822.501,373
85.9599.851,162
7United States32.4543.841,351
60.4286.981,440
8United States24.1633.551,389
9United States111.34183.091,644
10United States52.3184.771,621
11United States35.5259.551,676
12United States113.73193.181,699
7214990042Other, containing by weight less than 0.25% of carbon: Rounds, of a diameter of 76 mm or more but not exceeding 152 mm2United States3.714.921,326
3Italy1.315.203,969
Mexico0.400.761,899
United States1.652.301,391
4United States1.862.441,312
5Brazil0.531.061,988
Mexico0.220.452,053
United States1.862.441,312
6United States1.752.451,404
7United States3.006.072,025
8United States5.649.251,640
9United States1.883.111,655
10United States5.729.651,688
11United States0.110.423,842
12Czech Republic0.150.493,326
United States6.6818.692,797
7214990043Other, containing by weight less than 0.25% of carbon: Rounds, of a diameter exceeding 152 mm2United States2.774.861,753
5United States1.302.301,761
7China2.908.282,859
10Mexico1.775.593,153
United States2.247.353,278
11Czech Republic1.725.173,005
United States0.953.403,590
12United States5.7421.493,746
7214990049Other, containing by weight less than 0.25% of carbon: Other2United States9.0911.721,290
3United States5.457.031,290
4United States3.644.771,312
5United States3.644.771,311
6United States3.644.771,312
5.457.401,357
7United States1.822.681,473
9.2113.571,473
8United States3.646.711,845
9United States16.2926.811,646
10United States10.9117.961,647
11United States12.7220.961,648
12United States1.823.041,673
7214990051Other, containing by weight 0.25% or more but less than 0.6% of carbon: Rounds, of a diameter of less than 76 mm2United States16.3521.091,290
3United States1.822.381,312
12.5016.021,281
4United States14.8116.551,118
5United States14.5919.111,310
6United States31.2642.911,373
7United States3.637.462,058
9.4610.711,132
8United States5.588.451,516
9United States14.4522.861,582
10United States21.7736.051,656
12United States21.3536.131,692
7214990053Other, containing by weight 0.25% or more but less than 0.6% of carbon: Rounds, of a diameter exceeding 152 mm10Korea, Republic of2.543.731,466
Russian Federation0.110.504,519
11Korea, Republic of2.434.131,703
United States2.786.722,420
12China3.359.912,959
Italy1.815.342,957
7214990059Other, containing by weight 0.25% or more but less than 0.6% of carbon: Other2United States9.388.92951
3United States28.8235.441,230
4United States9.4312.371,311
5United States7.0217.272,461
6United States1.912.501,312
7Italy0.953.253,401
United States35.4553.111,498
8United States84.03118.541,411
10United States7.4112.201,647
11United States8.2513.791,672
12United States1.913.191,674
7214990060Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Other, containing by weight 0.25% or more but less than 0.6% of carbon: Other, containing by weight 0.6% or more of carbon3Korea, Republic of11.3716.161,421
5United States27.4333.151,208
86.38103.721,201
6United States81.2599.041,219
7United States27.1832.771,206
10United States14.0324.061,715
11United States21.2640.491,904
12United States6.4618.822,913
7214990090Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other2United States1.742.441,404
7216100011Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm - U sections: - American standard1United States14.2217.661,241
33.1147.481,434
2United States31.9648.941,531
3United States3.535.321,508
50.2459.001,174
4United States77.87107.601,382
5United States18.7625.871,379
6United States5.177.251,402
30.6244.781,462
7United States5.348.201,537
52.5962.001,179
8United States44.7871.231,591
9United States43.1571.361,654
10United States28.3551.441,814
11United States39.4766.541,686
12United States28.5748.791,708
7216210010Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: - L sections - Equal legs1United States14.7316.661,131
563.25576.951,024
2United States287.01330.971,153
3United States106.9096.21900
665.60663.22996
4United States84.80112.101,322
5United States381.61382.961,004
6United States3.615.261,458
305.67382.601,252
7United States29.0944.011,513
429.66572.491,332
8United States151.90227.461,497
9United States32.2251.951,612
10United States426.90695.441,629
11United States123.05201.491,637
12United States322.69544.451,687
7216310011Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - U sections - Of a height of 80 mm or more but not exceeding 152.4 mm: - American standard1United States17.1720.781,210
561.85655.921,167
2United States233.29307.351,317
3United States40.0451.711,291
218.91289.871,324
4United States468.51606.351,294
5United States153.86204.621,330
6United States83.81117.311,400
382.19483.461,265
7United States77.55111.661,440
277.92391.221,408
8United States437.60698.051,595
9United States247.07406.321,645
10United States188.46318.221,689
11United States375.89626.571,667
12United States172.56298.641,731
7216310021Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - U sections - Of a height exceeding 152.4 mm: - American standard1United States1.782.401,347
89.11112.051,257
2United States46.5763.821,371
3United States13.5016.901,251
128.85161.741,255
4United States48.7567.601,387
5United States151.14206.361,365
6United States10.0213.121,310
135.20195.021,442
7United States8.5612.701,484
64.81102.101,575
8United States136.55221.281,620
9United States73.42124.251,692
10United States40.0770.561,761
11United States146.20245.431,679
12United States145.08256.751,770
7216310029Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - U sections - Of a height exceeding 152.4 mm: - Other1United States4.009.212,306
4United States3.805.811,528
8United States3.0913.254,283
10United States3.8110.072,642
7216320010Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - I sections - Of a height of 80 mm or more but not exceeding 152.4 mm1United States0.641.792,816
3United States0.821.001,228
7United States3.3311.453,438
8United States0.461.733,732
9United States1.485.994,045
11United States0.562.364,254
7216320020Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - I sections - Of a height exceeding 152.4 mm1United States1.814.852,671
3United States0.872.643,035
4United States1.363.932,887
9United States1.274.973,912
12United States2.2710.024,417
7216330011Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Wide flange: - Of a height not exceeding 150 mm8United States4.008.692,172
7216330012Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Wide flange: - Of a height exceeding 150 mm but not exceeding 355 mm1United States3.296.732,047
4Taiwan2.883.181,106
United States21.1321.261,006
8United States5.9619.053,197
9United States1.754.262,441
12United States10.8324.072,223
7216330013Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Wide flange: - Of a height exceeding 355 mm but not exceeding 635 mm1United States3.014.261,416
7United States10.8525.202,324
8United States10.3225.542,474
10United States25.8749.971,931
11United States19.8249.032,473
12United States5.8614.622,494
7216330014Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Wide flange: - Of a height exceeding 635 mm5United States19.1745.252,360
6United States28.5147.901,680
9United States5.3112.992,445
7216330020Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Bearing pile9United States16.6960.413,620
12United States1.213.893,224
7216400011Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, equal legs: - Of a height of 80 mm or more but not exceeding 152.4 mm1United States7.248.601,188
207.23247.321,193
2United States143.42186.001,297
3United States27.0832.321,193
376.01445.451,185
4United States210.30284.441,353
5United States195.13237.231,216
6United States193.25265.081,372
7United States42.5565.261,534
33.0045.561,381
8United States195.99312.261,593
9United States40.3167.911,685
10United States147.33244.051,656
11United States126.40213.921,692
12United States169.68307.361,811
7216400012Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, equal legs: - Of a height exceeding 152.4 mm8United States3.795.701,501
7216400021Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, unequal legs: - Large leg, of a height of 80 mm or more but not exceeding 152.4 mm1United States10.6713.411,257
421.10517.931,230
2United States134.68179.501,333
3United States16.0420.761,294
70.9093.771,323
4United States300.53423.811,410
5United States96.46132.071,369
6United States5.027.221,438
257.71354.741,377
7United States5.047.781,545
117.67163.871,393
8United States221.26363.131,641
9United States113.74191.731,686
10United States138.09239.721,736
11United States131.11227.771,737
12United States127.42229.201,799
7216400022Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, unequal legs: - Large leg, of a height exceeding 152.4 mm1United States3.704.961,340
2United States3.705.411,462
3United States3.575.141,437
4United States22.2130.731,384
6United States3.706.051,636
8United States3.706.451,744
11United States7.4013.471,820
7216400030Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - T sections5United States26.2136.301,385
6United States77.16104.241,351
7United States1.994.632,324
12United States0.140.453,135
7217100041Wire of iron or non-alloy steel - Not plated or coated, whether or not polished - Round, heat treated, containing by weight less than 0.25% of carbon: Of a diameter of less than 1.5 mm, in coils weighing not more than 2 kg6United States7.4626.153,507
7217200042Wire of iron or non-alloy steel - Plated or coated with zinc-aluminum, containing by weight less than 0.25% of carbon: Round, of a diameter of less than 1 mm12China0.000.003,010
7217200043Wire of iron or non-alloy steel - Plated or coated with zinc-aluminum, containing by weight less than 0.25% of carbon: Round, of a diameter of 1.5 mm or more but less than 3 mm4United States0.230.602,631
8United States0.451.373,025
10United States0.180.553,025
12United States0.230.913,993
7217900020Wire of iron or non-alloy steel - Plated or coated with other base metals -Other - Coated with plastics9China0.030.082,680
7217900093Wire of iron or non-alloy steel - Plated or coated with other base metals - Other -Containing by weight 0.6% or more of carbon4United States0.230.773,410
5United States0.541.923,532
6United States0.361.233,379
7United States0.010.021,684
0.180.643,535
9United States0.140.624,578
10United States0.542.664,891
11United States0.281.264,462
12United States0.542.534,651
7225300000Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, in coils11United States0.421.663,982
7225400010Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Heat treated: - Heat treated2United States46.53108.612,334
4United States40.0379.571,988
5United States33.7962.271,843
7United States1.044.113,965
7225400020Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other, tool steel: - Other, of a width of 600 mm or more but not exceeding 1,525 mm4China4.5412.332,718
9United States0.301.364,595
Other, tool steel4China4.5412.332,718
9United States0.301.364,595
7225400030Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other, of a width exceeding 1,525 mm but not exceeding 1,830 mm3United States1.746.443,695
7225400040Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other, of a width exceeding 1,830 mm but not exceeding 2,450 mm1United States2.967.942,681
4United States0.742.423,266
12United States12.7636.172,834
7225400050Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other, of a width exceeding 2,450 mm1United States0.462.094,522
7226990099Other:  Of a thickness exceeding 1 mm4United States0.400.761,893
7227100000Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Of high speed steel5United States0.050.122,606
6United States1.735.102,956
7United States1.173.683,144
9United States14.6351.273,505
10United States1.746.053,483
11United States12.0448.824,054
12United States4.4917.043,796
7228100010Cold-formed3United States38.7560.921,572
7228100020Not cold-formed3United States18.9829.481,554
7228200050Not cold-formed6United States1.504.182,785
7228300010Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Flat bars2United States18.3225.351,383
3United States10.6513.661,283
4United States41.2860.691,470
5United States25.0631.571,260
6United States19.5027.611,415
170.20252.711,485
7United States44.6772.351,620
8United States6.7714.642,163
9United States13.3735.212,633
10United States1.814.332,385
11United States39.8067.041,685
12United States4.7415.343,236
7228300022Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Rounds: - Tool steel7France1.134.864,282
7228300029Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Rounds: - Other1China22.5957.642,552
USTX1.735.122,960
Czech Republic0.261.034,034
USTX0.391.223,147
Italy10.0824.202,401
Korea, Republic of1.083.363,128
Mexico21.0939.361,866
67.49115.521,712
USTX1.123.212,854
Spain3.4210.553,088
USTX0.772.092,722
Turkey3.099.323,021
United States19.8826.931,354
32.3250.191,553
2China2.335.972,561
USTX1.484.282,885
Czech Republic0.271.084,034
Italy5.0312.132,410
Korea, Republic of6.1012.642,073
Mexico1.272.201,738
Spain8.0119.612,448
Turkey30.6780.012,609
USTX0.190.512,707
United States114.84155.591,355
USTX20.5743.402,110
3Brazil0.911.842,024
China19.1141.192,156
6.3317.792,813
Czech Republic17.0236.042,117
Italy0.762.803,672
Korea, Republic of1.164.984,310
10.4521.472,055
Mexico2.595.242,022
6.9313.641,968
Spain0.200.824,151
18.3446.912,558
Turkey0.130.382,816
3.558.382,362
USTX0.150.473,031
United States0.651.542,360
64.04134.952,107
4Brazil0.250.612,478
China0.892.622,933
USTX1.723.772,193
Czech Republic9.1520.182,204
FranceUSTX1.516.274,141
Italy4.4511.442,569
USTX0.621.262,024
Korea, Republic of22.3152.182,339
USNJ10.1420.041,976
Mexico10.0226.682,662
USTX7.7425.013,231
Spain13.5836.112,660
Turkey3.739.562,562
USTX3.137.242,313
UkraineUSTX1.284.063,185
United States133.43207.501,555
USTX3.449.582,787
5Brazil0.671.321,967
China5.9217.522,960
Czech Republic13.4229.392,189
Italy1.775.393,048
Korea, Republic of14.2435.382,485
Spain5.3816.072,985
Turkey12.3228.032,276
United States102.23153.521,502
6Brazil0.330.892,662
China0.751.972,626
29.0892.493,181
Italy3.748.292,214
Korea, Republic of3.1810.133,187
2.196.572,999
Mexico18.5949.202,646
Romania1.144.223,712
Spain15.2852.193,416
Turkey3.648.942,455
United Kingdom0.833.223,863
United States11.5552.134,516
46.0377.241,678
7China8.1425.203,096
Czech Republic10.8625.042,305
France3.8816.504,249
Germany0.230.823,633
Italy3.205.771,806
Korea, Republic of0.932.782,978
17.5744.882,554
Mexico10.0112.501,248
Spain0.040.082,078
13.2042.603,227
Turkey0.461.242,677
0.863.714,311
United States5.0718.243,594
172.13385.002,237
8China10.9541.293,771
Czech Republic0.942.522,698
France2.5811.194,337
Germany3.3316.484,947
Italy3.3310.733,218
Korea, Republic of5.7223.584,121
Mexico1.193.202,697
Spain7.5326.893,571
Turkey0.451.483,263
United Kingdom1.004.424,434
United States66.27167.812,532
9Brazil0.271.124,125
China16.1055.543,449
Czech Republic0.772.713,542
Italy4.8015.733,275
Korea, Republic of9.1634.523,768
Mexico1.002.782,765
Spain50.84158.443,116
Turkey4.1012.683,091
Ukraine0.351.123,209
United States219.24529.812,417
10China28.89112.133,882
France0.411.894,638
Italy1.967.173,650
Korea, Republic of12.4527.912,242
Mexico0.883.383,835
Romania2.319.734,219
Spain3.1513.794,375
Turkey5.6318.123,220
United Arab Emirates2.107.323,482
United States165.01342.762,077
11Brazil1.634.973,047
China56.43233.764,143
USTX6.2221.673,483
Czech Republic0.511.522,986
Germany6.3829.194,572
Italy6.0920.063,294
Korea, Republic of3.3412.773,822
Mexico10.6932.283,019
Romania0.451.513,357
Spain31.2184.042,693
Turkey15.9550.593,172
USTX2.448.543,502
Ukraine24.5155.932,282
United States107.67263.292,445
12Brazil0.692.283,285
China18.6875.184,024
USTX0.552.083,767
Czech Republic1.173.743,203
Italy4.4713.983,128
Korea, Republic of20.2457.302,831
MexicoUSTX0.140.573,970
Spain14.6249.553,389
Tokelau5.2515.522,958
Turkey9.7031.693,266
Ukraine31.6772.972,304
United Kingdom1.413.962,817
United States29.37113.343,859
7228300090Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other1United States25.1185.013,386
2Poland1.515.223,451
Sweden28.4564.372,262
United Kingdom0.803.624,548
United States24.4532.551,331
3China1.042.342,243
0.551.132,049
France0.180.492,769
Korea, Republic of14.5640.352,771
United States5.0617.303,418
4United States24.0856.172,333
5China0.551.953,561
Spain0.080.283,422
Turkey2.796.742,419
United States0.030.072,815
6China7.884.32548
Germany2.441.74711
Spain0.150.654,425
Ukraine10.2621.402,086
United Kingdom1.487.254,901
United States15.2025.951,707
7China8.4736.504,309
Italy1.014.834,762
Turkey11.2730.482,703
Ukraine6.6923.173,464
United Kingdom0.864.014,671
United States6.9110.631,537
8China19.9765.843,297
United Kingdom2.8813.274,606
9United States8.7831.073,541
10China1.726.573,824
USTX1.586.904,364
Mexico1.979.084,619
Turkey0.441.623,721
United Kingdom16.8079.174,713
United States30.50118.453,883
11Austria2.060.53259
Spain1.225.844,773
Ukraine2.138.413,943
United Kingdom2.5811.044,276
12Brazil5.5921.063,766
France2.3010.704,645
Germany0.160.784,730
Italy1.566.914,433
Korea, Republic of2.1910.774,927
Turkey0.873.674,200
7228600000Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods1United States0.060.132,191
2United States0.000.001,500
3United StatesUSTX0.190.613,217
4United States2.205.032,282
6United States2.709.643,567
9United States7.8729.733,778
10United States0.230.954,024
11Taiwan0.000.014,751
7229200019Wire of other alloy steel - of silico-manganese steel - Round, of a diameter not exceeding 1.6 mm, containing by weight less than 0.2% of carbon, more than 0.9% of manganese, and more than 0.6% of silicon, suitable for electric arc-welding - Other8United States0.492.034,138
7229900090Wire of other alloy steel - Other round - Other7Korea, Republic of0.090.343,810
7304110000Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Line pipe of a kind used for oil or gas pipelines: - Of stainless steel1United States0.532.554,799
2Belarus25.4046.731,840
Italy14.1723.261,642
Taiwan4.7510.132,132
7United States0.451.252,749
7304190012Of an external diameter not exceeding 265 mm: - Of alloy steel1Mexico1.635.553,418
7304190022Of alloy steel1Italy10.0321.202,115
Of an external diameter exceeding 265 mm: - Of alloy steel1Italy10.0321.202,115
7304190031Of an external diameter not exceeding 266 mm: Of an A.P.I. grade not exceeding X-523Germany1.715.483,202
4Mexico20.2453.732,655
5United States1.072.912,708
6Mexico20.3351.672,541
United States20.8822.961,099
7Germany3.0511.023,618
United States2.497.282,926
9Germany2.117.203,412
Mexico20.6655.262,675
10United States1.505.563,715
11Belarus0.752.803,744
Germany4.1114.103,427
7304190032Of an external diameter not exceeding 266 mm: Of an A.P.I. grade greater than X-52 but not exceeding X-658Germany8.0527.863,463
11Mexico1.063.453,235
7304190039Of an external diameter not exceeding 266 mm: Other3Mexico0.180.361,968
4United States15.6224.611,576
10United States20.1877.753,853
7304190041Of an external diameter exceeding 266 mm but not exceeding 610 mm: Of an A.P.I. grade not exceeding X-524Italy1.283.262,537
5United States7.8132.014,100
7304190042Of an external diameter exceeding 266 mm but not exceeding 610 mm: Of an A.P.I. grade greater than X-52 but not exceeding X-656Mexico4.9317.593,566
7United States5.9816.332,732
7304190059Of an external diameter exceeding 610 mm: Other5United States1.524.643,059
7Germany0.572.404,239
10TaiwanUSTX0.350.762,192
12United States1.144.864,273
7304230010Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other drill pipe - New: - Of iron or non-alloy steel2Romania0.090.374,133
9United States19.8740.752,051
12TaiwanUSTX0.953.733,926
7304230020Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other drill pipe - Of alloy steel1Romania5.663.66647
2United States180.60244.171,352
3United States0.411.172,866
6United States4.746.021,269
8China4.5414.773,255
United States80.38204.352,542
10United States244.62551.562,255
12United States61.24152.762,495
7304240000Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other, of stainless steel2France2.105.602,666
Romania0.852.052,399
3France0.340.671,990
4Brazil0.230.241,066
Germany0.522.414,610
Romania2.525.782,294
5China0.512.474,847
France0.170.513,039
Italy0.020.052,711
Korea, Republic of0.783.334,286
Mexico5.5613.762,473
Romania0.170.533,171
6Italy0.612.564,206
Japan1.135.224,602
Romania5.0012.952,589
United States3.402.86841
10United Kingdom0.090.171,832
11United States2.456.512,656
7304290011Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter exceeding 114.3 mm but not exceeding 177.8 mm: - Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary specification1United States26.2933.051,257
2Mexico321.23853.892,658
3Mexico96.72292.233,022
United States20.1019.68979
4United States46.0657.321,245
5Germany10.3324.832,403
Romania10.2921.792,118
United States29.4449.071,667
10China0.380.37996
11United States35.9484.142,341
12United States0.753.284,391
7304290019Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter exceeding 114.3 mm but not exceeding 177.8 mm: - Other2Mexico37.73137.843,654
Saudi Arabia0.220.452,050
United States40.7346.621,145
3China2.318.243,563
Germany4.2816.663,887
United States4.1512.132,925
4Mexico175.64589.023,354
United States22.9472.313,152
7Brazil0.571.602,820
Romania5.8119.163,298
United States6.6624.283,648
8United States10.1832.443,186
9Mexico9.7932.903,360
United States3.809.142,404
10Brazil14.2942.532,977
Romania10.6130.622,886
Saudi Arabia3.817.501,968
United States51.9880.441,548
11Mexico24.5378.373,195
Saudi Arabia1.856.793,670
United States112.57397.473,531
12Brazil2.5110.184,048
Mexico71.38159.912,240
7304290021Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter exceeding 177.8 mm but not exceeding 298.5 mm: - Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary specification1Mexico398.03486.721,223
2Mexico739.01902.471,221
3Mexico496.57574.561,157
5Germany1.787.063,965
9Mexico456.21642.411,408
12Mexico134.78280.472,081
7304290029Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter exceeding 177.8 mm but not exceeding 298.5 mm: - Other2United States2.165.112,368
3United States0.691.882,729
4GermanyUSTX0.120.413,344
6United States201.85553.062,740
7United States315.83876.572,775
8United States261.94616.322,353
9Mexico74.66162.222,173
United States577.241,107.021,918
10Argentina3.539.922,806
Mexico186.16404.772,174
United States38.23107.862,821
11Argentina5.3315.082,828
7304290031Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter exceeding 298.5 mm: - Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary specification2Mexico24.9850.762,032
3Mexico38.6279.042,047
5Russian Federation54.70133.332,438
United States15.0732.322,144
7304290039Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter exceeding 298.5 mm: - Other1Austria341.01512.741,504
2Austria580.521,041.551,794
3Austria41.6492.902,231
4Mexico1.903.922,062
United States213.38272.231,276
5United States438.76554.751,264
10Germany0.351.393,922
Italy0.120.453,835
United States14.1652.123,680
11United States170.13117.30689
7304290041Tubing, of an external diameter not exceeding 60.2 mm: - Of an A.P.I. grade H-40, J-55 or equivalent proprietary specification2United States41.70141.923,404
3Spain58.54198.293,387
7United States29.73107.883,628
10United States1.918.454,437
12United States0.251.254,936
7304290049Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Tubing, of an external diameter not exceeding 60.2 mm: - Other3United States399.1789.61224
9Mexico1.724.862,824
Tubing, of an external diameter not exceeding 60.2 mm: - Other3United States399.1789.61224
9Mexico1.724.862,824
7304290051Tubing, of an external diameter of 60.3 mm: - Of an A.P.I. grade H-40, J-55 or equivalent proprietary specification1Mexico38.5680.142,078
151.55228.801,510
3India0.612.764,488
8United States1.816.443,550
9United States154.08474.283,078
10Belgium29.4650.571,717
Korea, Republic of8.5325.552,995
12United States1.487.284,904
7304290059Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Tubing, of an external diameter of 60.3 mm: - Other7Ukraine38.2783.132,172
9Germany7.1723.203,235
Mexico532.661,179.562,214
10Germany13.5052.213,868
Mexico115.09216.531,881
11Argentina40.62103.182,540
Tubing, of an external diameter of 60.3 mm: - Other7Ukraine38.2783.132,172
9Germany7.1723.203,235
Mexico532.661,179.562,214
10Germany13.5052.213,868
Mexico115.09216.531,881
11Argentina40.62103.182,540
7304290061Tubing, of an external diameter exceeding 60.3 mm but not exceeding 73 mm: - Of an A.P.I. grade H-40, J-55 or equivalent proprietary specification5Romania7.5717.912,365
7United States1.245.974,797
10United States5.9721.073,529
11United States39.65115.252,907
12United States30.8246.091,495
7304290069Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Tubing, of an external diameter exceeding 60.3 mm but not exceeding 73 mm: - Other1Romania0.601.592,669
United States122.01383.733,145
2United States41.36111.222,689
3Saudi Arabia0.501.282,575
United States0.190.412,176
120.12379.523,160
4United States170.65374.422,194
5United States81.8575.95928
6United States40.44160.653,973
39.0036.67940
Tubing, of an external diameter exceeding 60.3 mm but not exceeding 73 mm: - Other1Romania0.601.592,669
United States122.01383.733,145
2United States41.36111.222,689
3Saudi Arabia0.501.282,575
United States0.190.412,176
120.12379.523,160
4United States170.65374.422,194
5United States81.8575.95928
6United States40.44160.653,973
39.0036.67940
7304290071Tubing, of an external diameter exceeding 73 mm: - Of an A.P.I. grade H-40, J-55 or equivalent proprietary specification1Mexico77.92103.151,324
2Korea, Republic of81.73139.281,704
Mexico39.3152.211,328
3Ukraine7.1532.814,588
7United States1.105.264,797
7304290079Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Tubing, of an external diameter exceeding 73 mm: - Other1Mexico0.160.402,522
United States175.26267.641,527
2China1.134.273,769
United States0.863.273,820
3China3.3211.573,486
Mexico40.1665.991,643
201.44332.411,650
Romania0.732.413,304
Spain0.340.942,796
United States16.8574.454,418
2.155.912,754
4France10.2842.624,145
Mexico193.47192.24994
Romania0.732.633,581
United States17.5653.203,030
5Romania7.7536.194,667
6France14.9358.923,947
Japan3.009.933,309
Romania0.440.892,022
United States328.64486.521,480
7China2.448.613,533
Italy0.752.253,009
Romania9.4128.923,073
Spain16.4267.294,099
Ukraine72.03153.982,138
United Kingdom0.461.162,492
United States44.6369.471,557
8France0.712.793,935
Italy0.833.303,980
Korea, Republic of1.536.844,468
United States39.04129.553,319
9China7.4826.403,531
Japan0.150.473,051
Mexico155.07273.991,767
Ukraine0.250.632,566
United States0.170.633,787
10Romania10.6134.593,261
United States2.1110.384,910
11China3.0912.474,035
Korea, Republic of0.160.734,565
Romania1.787.454,179
USTX2.7011.014,075
United States29.0484.832,922
12Czech Republic3.7016.074,348
Romania12.7860.054,699
Tubing, of an external diameter exceeding 73 mm: - Other1Mexico0.160.402,522
United States175.26267.641,527
2China1.134.273,769
United States0.863.273,820
3China3.3211.573,486
Mexico40.1665.991,643
201.44332.411,650
Romania0.732.413,304
Spain0.340.942,796
United States16.8574.454,418
2.155.912,754
4France10.2842.624,145
Mexico193.47192.24994
Romania0.732.633,581
United States17.5653.203,030
5Romania7.7536.194,667
6France14.9358.923,947
Japan3.009.933,309
Romania0.440.892,022
United States328.64486.521,480
7China2.448.613,533
Italy0.752.253,009
Romania9.4128.923,073
Spain16.4267.294,099
Ukraine72.03153.982,138
United Kingdom0.461.162,492
United States44.6369.471,557
8France0.712.793,935
Italy0.833.303,980
Korea, Republic of1.536.844,468
United States39.04129.553,319
9China7.4826.403,531
Japan0.150.473,051
Mexico155.07273.991,767
Ukraine0.250.632,566
United States0.170.633,787
10Romania10.6134.593,261
United States2.1110.384,910
11China3.0912.474,035
Korea, Republic of0.160.734,565
Romania1.787.454,179
USTX2.7011.014,075
United States29.0484.832,922
12Czech Republic3.7016.074,348
Romania12.7860.054,699
7304410010MECHANICAL TUBES&PIPES, SS, COLD WORKED, CIRC CROSS-SECT    5United States0.010.022,640
Other, of circular cross-section, of stainless steel: - Cold-drawn or cold-rolled (cold-reduced) - Of an external diameter of less than 19 mm5United States0.010.022,640
7304410090OTHER SS TUBES&PIPES, COLD WORKED, CIRC CROSS-SECTION       1Japan0.060.223,483
2Australia0.060.243,742
4France0.050.244,760
6Italy0.281.304,569
United States3.021.72568
7Ukraine0.070.192,712
Other, of circular cross-section, of stainless steel: - Cold-drawn or cold-rolled (cold-reduced) - Other1Japan0.060.223,483
2Australia0.060.243,742
4France0.050.244,760
6Italy0.281.304,569
United States3.021.72568
7Ukraine0.070.192,712
7305110031Of an external diameter not exceeding 610 mm: Of an A.P.I. grade not exceeding X-527Korea, Republic of3.2210.303,200
7305110032Of an external diameter not exceeding 610 mm: Of an A.P.I. grade greater than X-52 but not exceeding X-656Japan3.699.082,463
11Japan53.42214.604,017
7305110039Of an external diameter not exceeding 610 mm: Other2Korea, Republic of8.0117.952,240
3United Kingdom4.4511.412,562
6United States7.1822.523,138
7305110041Of an external diameter exceeding 610 mm: Of an A.P.I. grade not exceeding X-5210Korea, Republic of3.6410.382,853
11Korea, Republic of7.4524.413,274
7305110042Of an external diameter exceeding 610 mm: Of an A.P.I. grade greater than X-52 but not exceeding X-654United States3.832.51654
6Korea, Republic of11.4433.702,944
22.7867.392,958
9Korea, Republic of6.1121.243,477
7305110043Of an external diameter exceeding 610 mm: Of an A.P.I. grade greater than X-65 but not exceeding X-704United States2.375.872,477
8Japan3.389.762,889
9Japan16.8956.943,370
United Kingdom13.3544.003,295
11United States5.0217.123,413
7305110049Of an external diameter exceeding 610 mm: Other6Germany1.743.762,164
12Korea, Republic of18.4356.813,083
7305120031Of an external diameter not exceeding 509 mm: Of an A.P.I. grade not exceeding X-5210Korea, Republic of0.461.603,459
United Kingdom20.3058.312,873
7305120033Of an external diameter not exceeding 509 mm: Of an A.P.I. grade greater than X-65 but not exceeding X-707United States17.0547.222,770
8United States31.9539.781,245
7305120043Of an external diameter exceeding 509 mm: Of an A.P.I. grade greater than X-65 but not exceeding X-709Japan33.79113.883,370
7305190015Of an external diameter not exceeding 609.6 mm: - Other, of alloy steel11United States17.4734.952,001
7305190024Of an external diameter exceeding 609.6 mm: - Other, of iron or non-alloy steel2United States15.608.16523
7306190010Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Line pipe of a kind used for oil or gas pipelines: - Other - Of an A.P.I. grade not exceeding X-521Korea, Republic of4.188.532,044
South Africa20.4127.791,361
4Mexico21.57102.564,754
United States18.9684.794,471
5Mexico19.0583.334,374
7Russian Federation12.3057.884,706
United Kingdom36.69128.283,496
United States16.7854.693,258
8United Kingdom33.57131.583,920
9United Kingdom78.93328.764,165
7306190090Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Line pipe of a kind used for oil or gas pipelines: - Other - Other1Japan2.486.872,763
5Japan13.5035.742,647
6United States0.040.082,279
7Korea, Republic of18.3636.301,977
8Japan3.389.822,905
12Mexico75.20122.601,630
7306290019Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Casing and tubing of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter exceeding 114.3 mm but not exceeding 177.8 mm: - Other3United States40.4545.011,113
20.0023.001,150
4United States345.71366.351,060
5United States223.65265.461,187
6United States160.70181.001,126
11United States166.53404.862,431
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Casing and tubing of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter of 114.3 mm or more but not exceeding 177.8 mm: - Other3United States40.4545.011,113
20.0023.001,150
4United States345.71366.351,060
5United States223.65265.461,187
6United States160.70181.001,126
11United States166.53404.862,431
7306290031Casing, of an external diameter exceeding 298.4 mm: - Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary specification9United States15.2957.803,780
7306290061Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Casing and tubing of a kind used in drilling for oil or gas: - Other - Tubing: - Of an A.P.I. grade H-40, J-55 or equivalent proprietary specification1Italy21.3228.551,339
United States20.6833.971,642
2Korea, Republic of41.57141.503,404
7306290069Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Casing and tubing of a kind used in drilling for oil or gas: - Other - Tubing, of an external diameter exceeding 60.3 mm but not exceeding 73 mm: - Other3China55.93152.962,735
Spain19.1077.544,059
United States34.5099.182,874
4United States70.44179.082,542
5United States108.91415.913,819
6United States76.75239.523,121
7United States54.65206.423,777
8Japan6.7626.143,865
United States50.96143.342,813
9China108.27269.202,486
United States102.80391.873,812
10United States40.39163.774,055
11United States17.2557.063,308
12Korea, Republic of20.4177.993,821
United States79.56314.113,948
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Casing and tubing of a kind used in drilling for oil or gas: - Other - Tubing: - Other3China55.93152.962,735
Spain19.1077.544,059
United States34.5099.182,874
4United States70.44179.082,542
5United States108.91415.913,819
6United States76.75239.523,121
7United States54.65206.423,777
8Japan6.7626.143,865
United States50.96143.342,813
9China108.27269.202,486
United States102.80391.873,812
10United States40.39163.774,055
11United States17.2557.063,308
12Korea, Republic of20.4177.993,821
United States79.56314.113,948
7306300010Galvanized, of an external diameter not exceeding 114.3 mm:1United States2.244.762,123
3United States28.0576.962,744
4United States9.8126.722,725
6United Arab Emirates0.000.013,120
0.050.122,582
7Mexico37.1566.301,784
United States18.5150.182,711
8Mexico43.2747.321,094
United States0.070.06891
9Mexico18.4973.333,967
United States5.6219.653,494
10Mexico18.0447.532,635
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Galvanized, of an external diameter not exceeding 114.3 mm: - Galvanized, of an external diameter not exceeding 114.3 mm1United States2.244.762,123
3United States28.0576.962,744
4United States9.8126.722,725
6United Arab Emirates0.000.013,120
0.050.122,582
7Mexico37.1566.301,784
United States18.5150.182,711
8Mexico43.2747.321,094
United States0.070.06891
9Mexico18.4973.333,967
United States5.6219.653,494
10Mexico18.0447.532,635
7306300020Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Other, of an external diameter not exceeding 114.3 mm: - Other, of an external diameter not exceeding 114.3 mm1Mexico39.2734.01866
United States85.76159.511,860
2United States54.81132.492,417
3India0.190.864,511
South Africa0.090.444,702
United States21.1256.582,679
4United States109.15289.432,652
5United States299.49866.512,893
6India0.130.604,680
United States82.77234.172,829
102.81293.352,853
7India0.110.474,117
United States49.33164.713,339
239.34709.112,963
8United States69.09227.033,286
9Mexico18.5786.754,670
United States73.35251.393,427
10United States22.2978.613,527
12United States20.2284.424,176
Other, of an external diameter not exceeding 114.3 mm:1Mexico39.2734.01866
United States85.76159.511,860
2United States54.81132.492,417
3India0.190.864,511
South Africa0.090.444,702
United States21.1256.582,679
4United States109.15289.432,652
5United States299.49866.512,893
6India0.130.604,680
United States82.77234.172,829
102.81293.352,853
7India0.110.474,117
United States49.33164.713,339
239.34709.112,963
8United States69.09227.033,286
9Mexico18.5786.754,670
United States73.35251.393,427
10United States22.2978.613,527
12United States20.2284.424,176
7306300030Of an external diameter exceeding 114.3 mm:1United States47.2527.39580
2United States0.351.073,101
3United States73.4647.71650
0.552.183,945
4France0.973.223,312
United States505.52317.31628
5United States25.5914.47566
405.78246.22607
6United States169.92106.66628
7United States48.3138.25792
128.14109.09851
8United States59.7373.971,238
9Korea, Republic of11.4434.833,044
United States0.822.452,992
10United States205.94235.611,144
11Korea, Republic of40.82155.513,809
United States260.49212.64816
12Egypt45.84104.082,271
United States825.89649.64787
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Of an external diameter exceeding 114.3 mm: - Of an external diameter exceeding 114.3 mm1United States47.2527.39580
2United States0.351.073,101
3United States73.4647.71650
0.552.183,945
4France0.973.223,312
United States505.52317.31628
5United States25.5914.47566
405.78246.22607
6United States169.92106.66628
7United States48.3138.25792
128.14109.09851
8United States59.7373.971,238
9Korea, Republic of11.4434.833,044
United States0.822.452,992
10United States205.94235.611,144
11Korea, Republic of40.82155.513,809
United States260.49212.64816
12Egypt45.84104.082,271
United States825.89649.64787
7306500000Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of other alloy steel1United States7.5110.641,417
2United States0.170.814,825
3Romania0.250.702,788
United States7.9622.472,822
4France2.456.762,757
United States128.21536.894,187
5United States22.4156.812,535
6China0.040.071,885
Mexico0.020.041,808
7United States115.93448.753,871
8Germany0.080.323,816
Romania3.399.352,759
United States0.471.623,465
9Romania2.8610.283,588
United States12.2638.673,153
10France0.672.143,204
United States57.23245.064,282
11Germany4.5115.473,427
12Italy0.170.794,518
United States53.07215.224,055
7306610010Of iron or non-alloy steel:1United States157.96270.161,710
2United States131.37292.462,226
3United States59.92130.202,173
386.24820.042,123
4United States210.25485.492,309
5United States223.76566.722,533
6United States41.43114.672,768
183.37520.802,840
7United States106.90316.662,962
74.90229.333,062
8United States146.08482.793,305
9United States178.35610.113,421
10United States232.44795.803,424
11United States72.36241.613,339
12United States87.31297.083,403
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of iron or non-alloy steel: - Of iron or non-alloy steel1United States157.96270.161,710
2United States131.37292.462,226
3United States59.92130.202,173
386.24820.042,123
4United States210.25485.492,309
5United States223.76566.722,533
6United States41.43114.672,768
183.37520.802,840
7United States106.90316.662,962
74.90229.333,062
8United States146.08482.793,305
9United States178.35610.113,421
10United States232.44795.803,424
11United States72.36241.613,339
12United States87.31297.083,403
7306610020Of alloy steel:1United States5.7712.722,205
2Mexico2.049.824,814
United States23.3652.722,257
4United States0.482.054,279
5United States3.3715.934,721
6United States0.180.603,259
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of alloy steel: - Of alloy steel1United States5.7712.722,205
2Mexico2.049.824,814
United States23.3652.722,257
4United States0.482.054,279
5United States3.3715.934,721
6United States0.180.603,259
7306690020Of alloy steel2Taiwan11.024.33393
5Taiwan0.432.144,982
United States54.11121.732,250
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of other non-circular cross-section - Of alloy steel: - Of alloy steel2Taiwan11.024.33393
5Taiwan0.432.144,982
United States54.11121.732,250
7306900010Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other - Of iron or non-alloy steel2United States17.8548.462,715
5United Arab Emirates0.050.244,421
6United Arab Emirates0.160.171,057
7United States4.3511.062,539
8United States1.350.67496
12United States20.2715.48764
7306900020Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other - Of alloy steel1China1.092.922,683
7Taiwan0.010.074,645
United States0.221.004,550
Coutts - Total62,584.06112,236.741,793
Edmonton7208370050Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width exceeding 1,830 mm1United States473.08404.99856
2United States84.00141.071,679
3United States340.32461.241,355
4United States98.01133.751,365
5United States630.19950.571,508
6United States389.89586.771,505
7United States100.02157.391,574
292.90455.921,557
8United States124.94193.531,549
9United States378.87594.221,568
10United States395.32764.301,933
11Russian Federation307.01714.082,326
United States341.14707.612,074
12Russian Federation739.931,798.502,431
United States350.87776.392,213
7208380050Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 3 mm or more but less than 4.75 mm - Of a width exceeding 1,830 mm8United States74.04117.891,592
7208510010Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Heat treated5United States60.46117.611,945
8Mexico38.1671.091,863
9Mexico17.4839.102,237
United States82.44190.762,314
7208510091Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other: - Of a width of 600 mm or more but not exceeding 1,525 mm1United States5.564.09737
4United States21.4922.381,042
5United States37.0556.991,538
7208510092Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other: - Of a width exceeding 1,525 mm but not exceeding 1,830 mm1United States120.0397.78815
USIA11.119.12820
2United States117.04103.54885
3United States21.6724.881,148
71.3677.911,092
4United States144.48196.611,361
5United States43.7669.521,589
6United States94.02120.981,287
60.9083.131,365
7United States1.672.491,496
8United States324.35602.571,858
9United States45.5792.932,039
10United States69.46134.981,943
11United States91.36207.692,273
12United States85.21194.342,281
7208510093Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other: - Of a width exceeding 1,830 mm but not exceeding 2,450 mm1United States314.30313.37997
USIA59.2846.18779
MN8.896.77762
2United States368.03388.531,056
3United States148.49182.411,228
783.69988.371,261
USIA262.74330.401,258
4United States976.651,286.071,317
5United States957.401,347.831,408
6United States92.47132.311,431
575.91910.201,580
7United States23.7137.081,564
482.45779.711,616
8United States466.551,004.332,153
9United States843.141,665.401,975
10Mexico15.0734.212,271
United States705.591,469.952,083
11United States883.741,950.062,207
12Mexico84.34212.912,524
United States801.331,784.542,227
7208510094Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other: - Of a width exceeding 2,450 mm but not exceeding 3,050 mm1United States315.83274.37869
USIA221.37179.39810
2United States402.94384.59954
3United States182.47220.581,209
390.78432.171,106
USIA16.6718.931,136
4United States334.35438.521,312
5United States496.64656.411,322
6United States85.21122.391,436
886.071,352.111,526
7United States54.6585.171,559
256.40405.261,581
8United States577.021,018.371,765
9Mexico78.27166.512,127
United States299.02600.472,008
10United States519.32247.17476
11United States619.951,345.162,170
12Mexico315.70805.462,551
Russian Federation40.05102.432,557
United States782.551,706.412,181
7208510095Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other: - Of a width exceeding 3,050 mm1United States49.7262.821,264
2United States8.1715.161,856
3United States30.9235.231,139
4United States77.8092.621,190
7208520010Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Heat treated5United States17.3432.221,859
7Russian Federation2.444.251,740
9Mexico4.459.262,083
Heat treated5United States17.3432.221,859
7Russian Federation2.444.251,740
9Mexico4.459.262,083
7208520091Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Other: - Of a width of 600 mm or more but not exceeding 1,525 mm12United States6.0213.582,257
Of a width of 600 mm or more but not exceeding 1,525 mm12United States6.0213.582,257
7208520092Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Other: - Of a width exceeding 1,525 mm but not exceeding 1,830 mm1United States2.091.50721
USIA0.700.51731
3United States31.6850.271,587
4United States59.1893.221,575
8United States12.5025.162,012
9United States25.3051.782,046
7208520093Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Other: - Of a width exceeding 1,830 mm but not exceeding 2,450 mm1United States104.0898.49946
USIA1.480.96646
MN57.6549.42857
2United States32.9240.831,240
3United States151.89201.441,326
274.03365.221,333
USIA116.36139.141,196
4United States761.441,024.701,346
5United States574.95848.581,476
6United States68.7696.571,404
315.94472.871,497
7United States