Global Affairs Canada / Affaires mondiales Canada 
B4Date: 2023-12-01
Canadian Steel Imports by Port of Entry
Period Start: 2022-01-01 Period Ending: 2022-12-31
Port of EntryHS_CodeCmdty_Eng_DescMonthCountryOfOriginCountryOfExportStateOfExportTonnesC$1000C$/Tonne
7208250000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled, pickled: - Of a thickness of 4.75 mm or more8United States0.280.732,631
7211230000Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than cold-rolled (cold-reduced): - Containing by weight less than 0.25% of carbon11United States2.314.812,085
7217300042Wire of iron or non-alloy steel - Plated or coated with other base metals -Other, containing by weight 0.6% or more of carbon: Round, of a diameter of 1 mm or more but less than 1.5 mm10United States16.1552.403,245
 - Total18.7357.943,093
Aldergrove7208250000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled, pickled: - Of a thickness of 4.75 mm or more1United States0.370.501,335
7United States0.370.731,987
7208370020Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width exceeding 1,525 mm but not exceeding 1,830 mm5United States20.2051.102,529
7208370050Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width exceeding 1,830 mm5United States20.8252.562,524
9United States14.1435.042,478
7208400000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Not in coils, not further worked than hot-rolled, with patterns in relief8Finland3.2815.094,598
United States4.6711.952,556
7208900000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other2United States26.1446.621,784
3United States7.7129.903,880
7209150000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - In coils, not further worked than cold-rolled (cold-reduced): - Of a thickness of 3 mm or more2United States0.802.162,719
7209180000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - In coils, not further worked than cold-rolled (cold-reduced): - Of a thickness of less than 0.5 mm3United States0.672.013,009
5United States17.0341.752,452
7209250000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - Not in coils, not further worked than cold-rolled (cold-reduced): - Of a thickness of 3 mm or more5United States38.10117.093,073
7209260000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - Not in coils, not further worked than cold-rolled (cold-reduced): - Of a thickness exceeding 1 mm but less than 3 mm1United States0.892.632,948
6Germany0.060.294,902
7210110000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Plated or coated with tin: - Of a thickness of 0.5 mm or more8United States19.1860.333,146
7210490040Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other - Of a thickness less than 0.25 mm1United States0.000.00730
4United States1.933.461,793
7210490050Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other - Of a thickness of 0.25 mm or more but less than 0.5 mm3Pakistan43.8481.421,857
4Pakistan170.82318.821,866
142.48268.221,882
5Pakistan198.22375.231,893
283.19536.821,896
6Pakistan53.15101.071,902
7210490070Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other - Of a thickness exceeding 1 mm2United States0.160.593,636
3United States0.330.732,249
7210700090Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Painted, varnished or coated with plastics - Other1United States9.0342.474,701
2Australia2.651.34504
Japan56.2626.57472
Korea, Republic of24.2211.08458
United States27.7714.00504
3United States27.1590.083,318
4Australia16.648.40505
Japan20.65101.594,920
9.945.02505
5Japan27.9814.45517
United States3.3214.334,310
6Australia7.684.52589
Japan55.4829.64534
Korea, Republic of20.8311.62558
7Japan43.6124.26556
United States10.215.78567
8Australia18.659.78524
Japan18.379.57521
Korea, Republic of7.323.79518
United States9.795.07518
9Australia18.8411.42606
Japan49.2329.01589
Korea, Republic of7.134.01563
United States8.035.05628
10Australia8.234.81584
Japan33.1118.36555
Korea, Republic of39.3721.58548
United States1.730.95549
12Australia5.202.39460
Japan99.1739.26396
Korea, Republic of18.047.91438
United States14.808.80595
Vietnam4.292.67623
7211190090Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Other - Other3United States3.336.281,884
7213100011Concrete reinforcing bars, of specification CSA G30.18: Of a diameter of 12 mm or less1United States52.8777.131,459
7213100090Other2United States27.0636.661,355
134.74234.371,739
3United States80.58110.831,375
4United States26.7340.721,524
53.3783.641,567
5United States54.0885.751,586
109.00212.871,953
6United States101.45205.772,028
7United States53.8783.221,545
9United States215.53315.721,465
10United States26.8737.551,397
11United States27.1737.041,363
162.93205.911,264
12United States136.45175.511,286
7213200090Other6United States27.63116.724,224
7213910050Other, containing by weight less than 0.25% of carbon3United States20.9234.971,672
25.7743.051,671
5Mexico20.0938.371,909
9Mexico20.0941.672,074
12United States25.9841.331,591
7213910060Other, containing by weight 0.25% or more but less than 0.6% of carbon3United States4.828.051,672
6United States28.0651.291,828
7United States25.8648.021,857
9Mexico19.6442.682,173
7213910070Other, containing by weight 0.6% or more of carbon8United States19.3242.622,206
9Mexico20.2844.672,203
12United States25.9540.501,561
7213990090Other7United States81.96122.441,494
7214200011Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less: - With a maximum yield point of 400MPa1United States51.9973.341,411
2United States73.76115.591,567
3United States54.0273.851,367
108.04137.911,276
4United States27.3237.911,388
135.51190.611,407
5United States108.26156.111,442
81.58124.371,524
6United States197.17283.281,437
7United States83.94123.711,474
8United States139.86201.721,442
9United States53.8173.161,360
11United States217.85297.911,368
12United States54.3062.901,158
7214200021Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of more than 12 mm but not exceeding 39 mm: - With a maximum yield point of 400MPa2United States47.7465.551,373
3United States25.7131.981,244
27.3234.481,262
4United States81.78118.251,446
5United States27.0540.921,512
7United States28.1841.291,466
8United States52.8957.801,093
9United States56.7579.021,392
11United States53.1258.371,099
12United States27.1331.561,163
7214200022Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of more than 12 mm but not exceeding 39 mm: - With a minimum yield point greater than 400MPa but not exceeding 500MPa4United States177.98219.311,232
5United States194.23250.721,291
283.14371.091,311
6United States375.75523.291,393
7United States39.5858.101,468
10United States2.833.791,340
11United States107.45140.991,312
7214200032Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm: - With a minimum yield point greater than 400MPa but not exceeding 500MPa3United States26.7234.271,283
7214200033Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm: - With a minimum yield point greater than 500MPa but not exceeding 600MPa6United States25.4437.501,474
7214200090Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Other1United States1,235.981,549.591,254
2United States159.36209.201,313
1,070.881,363.911,274
3United States901.011,182.101,312
700.58900.031,285
4United States1,655.622,235.561,350
907.931,223.701,348
5United States450.00633.451,408
1,687.622,397.201,420
6United States1,885.622,722.641,444
7United States2,082.983,087.131,482
8United States1,255.791,815.341,446
9United States1,637.412,282.471,394
10United States1,719.362,290.661,332
11United States2,296.642,919.321,271
12United States1,522.261,846.941,213
7214300090Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Other11United States1.853.351,808
7214910011Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section -Containing by weight less than 0.25% of carbon: Of a width not exceeding 76 mm1United States36.0258.671,629
2United States21.5138.741,801
3United States28.5250.331,765
24.4545.411,857
4United States2.224.341,955
29.1255.291,898
5United States3.656.631,819
4.077.761,906
6United States17.6662.803,555
7United States2.324.481,936
9United States8.9818.312,038
10United States2.224.301,935
12United States17.7832.451,825
7214910012Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon: Of a width exceeding 76 mm but less than 152 mm2United States30.9455.281,787
3United States35.3162.271,764
26.8648.831,818
4United States9.0817.111,885
11.2621.591,917
5United States14.3227.081,891
7United States2.224.562,052
8United States2.223.921,764
9United States8.8917.461,964
10United States6.8513.501,969
12United States2.224.091,841
7214910013Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon: Of a width of 152 mm or more1United States13.8024.721,791
2United States8.5415.491,813
3United States35.1461.091,738
8.8916.311,834
4United States1.472.731,852
5United States3.616.501,799
3.607.332,033
7United States6.2612.572,008
9United States9.0817.081,881
10United States2.224.191,884
11United States3.666.611,808
12United States2.224.251,912
7214910021Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon: Of a width not exceeding 76 mm1United States5.8810.891,853
2United States1.883.451,841
3United States1.743.061,764
27.2348.981,799
4United States9.0818.552,044
5United States1.853.361,812
7.5014.171,889
6United States53.34104.201,953
7United States7.2615.012,068
11United States3.616.351,757
12United States47.1584.571,794
7214910031Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.6% or more of carbon: Of a width not exceeding 76 mm1United States1.853.361,814
2United States27.7350.341,815
3United States3.696.731,824
4United States1.853.511,896
5United States29.4354.871,865
10.7220.571,920
7United States1.763.371,914
9United States1.943.721,914
11United States3.786.821,802
7214910033Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.6% or more of carbon: Of a width of 152 mm or more5United States1.773.311,867
7214990041Other, containing by weight less than 0.25% of carbon: Rounds, of a diameter of less than 76 mm1United States57.28106.751,864
2United States26.6046.851,761
3United States32.3656.581,748
8.8214.731,671
4United States27.2449.951,834
33.3764.001,918
5United States2.334.421,902
15.2628.651,877
7United States20.1238.521,914
8United States13.9525.791,848
10United States74.37155.912,096
12United States4.658.741,879
7214990042Other, containing by weight less than 0.25% of carbon: Rounds, of a diameter of 76 mm or more but not exceeding 152 mm4United States1.753.231,852
7214990049Other, containing by weight less than 0.25% of carbon: Other2United States1.823.171,742
3United States1.823.171,742
7214990051Other, containing by weight 0.25% or more but less than 0.6% of carbon: Rounds, of a diameter of less than 76 mm1United States13.8724.601,773
3United States6.8113.441,973
4United States16.0829.641,843
5United States9.2717.621,902
15.7231.401,998
7United States8.7316.751,919
8United States15.7629.011,841
9United States6.9113.151,902
10United States4.368.641,979
12United States6.5512.441,901
7214990053Other, containing by weight 0.25% or more but less than 0.6% of carbon: Rounds, of a diameter exceeding 152 mm3United States0.853.494,126
7United States0.080.344,430
12United States0.431.894,383
7214990059Other, containing by weight 0.25% or more but less than 0.6% of carbon: Other3United States1.813.381,870
5United States5.5211.202,031
7214990060Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Other, containing by weight 0.25% or more but less than 0.6% of carbon: Other, containing by weight 0.6% or more of carbon4United States16.9845.882,702
7217100053Wire of iron or non-alloy steel - Not plated or coated, whether or not polished - Other, containing by weight less than 0.25% of carbon: Round, of a diameter of 1.5 mm or more but less than 3 mm5United States15.1528.611,888
7217100099Wire of iron or non-alloy steel - Not plated or coated, whether or not polished -Other, containing by weight 0.6% or more of carbon: Other2United States22.1549.522,236
6United States13.9934.042,433
7United States9.2920.662,225
7217200059Wire of iron or non-alloy steel - Plated or coated with zinc-aluminum, containing by weight 0.25% or more but less than 0.6% of carbon: Other11United States0.993.563,611
7217200099Wire of iron or non-alloy steel - Other, containing by weight 0.6% or more of carbon: Other1United States51.11127.092,487
2United States13.9435.142,522
3United States50.41126.012,500
5United States24.9863.542,544
45.87117.812,568
6United States32.9790.962,759
7United States20.4559.392,905
8United States25.1278.863,139
9United States20.2062.973,118
12United States4.7515.933,352
7228300049Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Of tool steel (other than high-speed steel): - Other2United States0.930.50536
4United States0.160.583,740
7228300051Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Concrete reinforcing bars and rods: - With a diameter of 12 mm or less2United States11.3113.941,233
3United States27.1336.151,333
2.803.991,424
4United States40.3052.851,311
33.9148.931,443
5United States27.9840.611,452
5.938.831,488
6United States50.6873.431,449
7United States27.5640.441,467
8United States68.81105.511,533
9United States33.9247.021,386
7228300052Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Concrete reinforcing bars and rods: - With a diameter of more than 12 mm but not exceeding 39 mm1United States326.02410.241,258
2United States56.5468.471,211
527.12663.711,259
3United States209.05262.431,255
68.5386.861,268
4United States156.36200.691,283
82.90112.761,360
5United States66.6189.081,337
256.68344.911,344
6United States339.95476.881,403
7United States412.55611.781,483
8United States499.06700.851,404
9United States533.46738.411,384
10United States286.78385.231,343
11United States206.29258.081,251
12United States124.35149.881,205
7228300053Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Concrete reinforcing bars and rods: - With a diameter exceeding 39 mm1United States56.2182.621,470
7228300071Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other rounds: - With a diameter of less than 76 mm1United States3.5110.983,130
4United States13.9525.561,832
26.8250.161,870
5United States40.33121.533,014
16.2230.491,879
6United States20.5053.692,619
10United States2.918.372,873
7228300081Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other, of rectangular cross section: - With a minimum cross section less than 152mm2United States4.457.941,787
15.5628.781,850
3United States15.5627.121,743
4United States2.224.251,912
7United States6.8513.281,938
8United States6.8512.161,775
9United States2.224.622,078
10United States31.1257.551,849
12United States13.5026.071,930
7228300082Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other, of rectangular cross section: - With a maximum cross section of 152mm or more2United States2.224.021,808
3United States8.8916.061,806
4.458.191,841
7228300090Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other1United States1.813.081,702
2United States27.3939.771,452
3United States1.943.381,742
1.023.863,779
7United States70.33111.981,592
9China0.120.282,324
Korea, Republic of0.241.014,207
United States6.8818.222,649
11United States27.2434.271,258
7304410090Other, of circular cross-section, of stainless steel: - Cold-drawn or cold-rolled (cold-reduced) - Other6Korea, Republic of15.038.75582
7306300041Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Of an external diameter not exceeding 60.325 mm: - Structural tubing, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification2United States10.3636.633,534
4United States16.7453.623,204
5United States2.526.712,661
6United States28.1594.193,346
7United States7.3322.773,107
9United States10.4529.682,841
12United States5.4313.042,402
7306300051Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Of an external diameter of greater than 60.325 mm but not exceeding 168.28 mm: - Structural tubing, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification5United States4.1611.222,695
7United States1.274.633,652
7306610031Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of an external periphery not exceeding 812.8 mm - Galvanized9United States1.013.173,135
7306610039Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of an external periphery not exceeding 812.8 mm - Other1United States6.1121.993,596
2United States51.39156.723,050
5United States73.74259.803,523
6United States75.80242.983,206
7United States121.62325.122,673
8United States59.26167.582,828
9United States73.31189.392,583
11United States17.7318.991,071
12United States15.3738.482,503
7306610049Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of an external periphery exceeding 812.8 mm - Other1United States53.30179.333,364
3United States0.683.014,427
8United States53.95133.672,478
9United States104.22317.793,049
10United States51.85108.352,090
11United States13.2428.952,186
12United States53.61126.332,356
7306690039Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of other non-circular cross-section - Of an external periphery not exceeding 812.8 mm - Other1United States50.30159.243,166
7306690049Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of other non-circular cross-section - Of an external periphery of exceeding 812.8 mm - Other1United States50.01156.093,121
2United States84.01255.273,039
3United States54.81163.022,974
5United States109.46368.373,365
6United States51.31172.323,358
7United States53.16164.603,097
8United States53.00160.523,029
10United States160.73370.202,303
11United States106.96231.192,162
12United States54.04129.362,394
Aldergrove - Total35,816.1653,100.391,483
Argentia7306610031Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of an external periphery not exceeding 812.8 mm - Galvanized5France3.2111.893,700
United Kingdom9.2836.513,933
7306610039Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of an external periphery not exceeding 812.8 mm - Other5Italy28.94104.203,600
Poland23.4884.553,600
United Kingdom18.5466.743,600
Argentia - Total83.46303.893,641
Beaver Creek7304220000Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Drill pipe of stainless steel2United States24.8719.99804
7304230020Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other drill pipe - Of alloy steel8United States1.815.162,846
Beaver Creek - Total26.6825.16943
Boissevain7209260000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - Not in coils, not further worked than cold-rolled (cold-reduced): - Of a thickness exceeding 1 mm but less than 3 mm2United States2.046.143,008
7214910011Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section -Containing by weight less than 0.25% of carbon: Of a width not exceeding 76 mm1United States5.465.631,032
3United States4.488.221,836
4United States2.244.251,897
7.048.151,157
5United States8.176.70820
6United States8.7216.271,867
7United States4.097.771,900
8United States11.0719.951,801
9United States10.2819.671,913
10United States5.4910.341,883
11United States2.244.021,797
12United States12.0219.291,605
7214910012Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon: Of a width exceeding 76 mm but less than 152 mm1United States7.896.05766
2United States6.6711.691,754
4United States1.773.231,819
5United States4.458.191,842
6United States4.458.361,882
7United States5.2910.061,900
9United States4.318.491,972
10United States10.7919.411,799
11United States4.457.881,773
12United States2.653.821,440
7214910013Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon: Of a width of 152 mm or more1United States4.968.721,758
4United States1.673.181,909
5United States14.8229.201,971
7United States8.4215.801,876
9United States2.224.221,899
11United States34.7661.761,777
7214910021Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon: Of a width not exceeding 76 mm2United States2.223.761,692
3United States8.9616.331,822
6.6811.631,741
4United States1.853.371,819
7214910022Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon: Of a width exceeding 76 mm but less than 152 mm10United States1.813.692,046
7214910031Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.6% or more of carbon: Of a width not exceeding 76 mm11United States1.883.391,808
7214990041Other, containing by weight less than 0.25% of carbon: Rounds, of a diameter of less than 76 mm2United States2.183.841,760
12.5822.991,828
5United States3.827.141,869
6United States4.328.061,867
8United States1.943.501,806
9United States6.1111.381,863
7214990042Other, containing by weight less than 0.25% of carbon: Rounds, of a diameter of 76 mm or more but not exceeding 152 mm6United States2.224.001,798
12United States2.223.931,766
7214990049Other, containing by weight less than 0.25% of carbon: Other11United States3.646.591,813
7214990051Other, containing by weight 0.25% or more but less than 0.6% of carbon: Rounds, of a diameter of less than 76 mm2United States6.2711.041,760
3United States6.5511.421,744
5United States4.328.091,874
6United States8.7316.421,881
11United States4.357.821,799
12United States2.653.691,390
7214990060Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Other, containing by weight 0.25% or more but less than 0.6% of carbon: Other, containing by weight 0.6% or more of carbon3United States2.133.921,837
7228300071Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other rounds: - With a diameter of less than 76 mm3United States18.7731.911,700
7306300041Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Of an external diameter not exceeding 60.325 mm: - Structural tubing, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification2United States17.4383.534,792
7306300061Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Of an external diameter of greater than 168.28 mm but not exceeding 273.05 mm: - Structural tubing, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification2United States2.5310.124,001
Boissevain - Total339.03648.011,911
Brampton7212400090Plated or coated with zinc: other11United StatesUSMI0.000.001,360
7228200050Not cold-formed12United States0.005.41
Brampton - Total0.005.411,803,467
Brantford7210700029Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Painted, varnished or coated with plastics - Plated or coated with zinc: - Other6United States18.9153.512,829
7211140090Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Other, of a thickness of 4.75 mm or more - Other1United States8.0018.712,339
7225500030Of a thickness exceeding 1 mm but less than 3 mm6United States2.8812.964,494
Brantford - Total29.8085.192,859
Calgary7209900000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - Other9United States0.482.124,407
7210110000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Plated or coated with tin: - Of a thickness of 0.5 mm or more5China0.770.881,143
8China2.893.601,244
12China2.033.741,841
7210300000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Electrolytically plated or coated with zinc1China12.0839.713,289
2China3.8812.433,208
3China0.612.333,822
13.2145.653,455
4China13.1653.424,058
5China8.8626.613,003
6China33.80107.103,169
7China21.7872.713,338
8China2.537.763,068
9China18.5056.183,036
10China158.38361.072,280
11China27.9381.862,931
12China12.4735.452,842
7210490060Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other - Of a thickness of 0.5 mm or more but not exceeding 1 mm9China20.7425.631,236
7210490070Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other - Of a thickness exceeding 1 mm1China0.421.513,578
2China6.5419.362,959
3China4.6815.193,245
3.5411.283,187
4China8.9926.392,933
5China8.4324.112,860
6China30.2889.592,959
7China51.29147.752,881
8China6.5518.122,768
9China35.10100.422,861
10China24.4272.482,968
11China28.3078.192,763
12China12.1931.272,565
7210700010Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Painted, varnished or coated with plastics - Not plated or coated with metal and not clad1Netherlands99.46279.792,813
10China10.1931.753,116
7210700090Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Painted, varnished or coated with plastics - Other2United States0.331.434,332
4United States16.0917.961,116
5United States15.9218.281,148
10China82.38190.962,318
7212300040Of a thickness exceeding 1 mm10United States6.8317.392,546
7212400090Plated or coated with zinc: other8Korea, Republic of19.9735.171,761
9China19.6230.631,561
7214100000Forged bars and rods of iron or non-alloy steel, hot rolled3China0.200.211,026
7214200012Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less: - With a minimum yield point greater than 400MPa but not exceeding 500MPa3United States50.2641.94835
7214200031Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm: - With a maximum yield point of 400MPa3Mexico433.11541.951,251
856.161,072.821,253
4Mexico86.66105.591,218
428.60532.141,242
5Mexico86.66107.711,243
650.34892.711,373
6Mexico1,327.511,941.221,462
7Mexico553.05864.811,564
8Mexico349.95388.991,112
9Mexico83.84132.241,577
7214200090Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Other3Mexico85.72106.561,243
259.05321.961,243
United States91.56122.211,335
4Mexico85.72105.741,233
171.44210.901,230
United States91.86115.941,262
5United States93.42129.091,382
143.05188.741,319
6Mexico169.56265.661,567
United States363.56555.701,529
7United States663.11903.161,362
8Mexico85.72126.461,475
United States282.47370.761,313
9United States357.04437.101,224
10United States696.46686.39986
11United States376.76409.811,088
12United States278.76320.961,151
7214910011Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section -Containing by weight less than 0.25% of carbon: Of a width not exceeding 76 mm8United States27.6853.891,947
7214990060Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Other, containing by weight 0.25% or more but less than 0.6% of carbon: Other, containing by weight 0.6% or more of carbon3China0.981.201,219
7217100044Wire of iron or non-alloy steel - Not plated or coated, whether or not polished - Round, heat treated, containing by weight less than 0.25% of carbon: Other, of a diameter of 1.5 mm or more but less than 3 mm6China26.1337.151,422
7217100059Wire of iron or non-alloy steel - Not plated or coated, whether or not polished - Other, containing by weight less than 0.25% of carbon: Other2Korea, Republic of67.56193.242,860
3Korea, Republic of17.3148.372,794
4Korea, Republic of34.77101.662,924
6Korea, Republic of173.97558.183,209
8Korea, Republic of35.13123.323,511
10Korea, Republic of52.16175.793,370
7217100099Wire of iron or non-alloy steel - Not plated or coated, whether or not polished -Other, containing by weight 0.6% or more of carbon: Other5China0.520.651,235
Türkiye41.9769.441,654
11China13.4917.461,294
7217200049Wire of iron or non-alloy steel - Plated or coated with zinc-aluminum, containing by weight less than 0.25% of carbon: Other2China0.000.012,488
5China0.000.012,336
6China0.010.022,638
7217200073Wire of iron or non-alloy steel - Other, containing by weight less than 0.25% of carbon: Round, of a diameter of 1.5 mm or more but less than 3 mm1QatarQA19.9643.432,176
2QatarQA19.5045.062,311
7217200074Wire of iron or non-alloy steel - Other, containing by weight less than 0.25% of carbon: Round, of a diameter of 3 mm or more2Türkiye47.5974.341,562
7217200099Wire of iron or non-alloy steel - Other, containing by weight 0.6% or more of carbon: Other3China1.560.44284
7217300022Wire of iron or non-alloy steel - Plated or coated with other base metals -Other, containing by weight less than 0.25% of carbon: Round, of a diameter of 1 mm or more but less than 1.5 mm1Korea, Republic of16.7743.012,565
7217300034Wire of iron or non-alloy steel - Plated or coated with other base metals -Other, containing by weight 0.25% or more but less than 0.6% of carbon: Round, of a diameter of 3 mm or more2Korea, Republic of33.77102.893,046
3Korea, Republic of34.17104.113,046
4Korea, Republic of50.07157.923,154
51.27158.533,092
5Korea, Republic of50.02160.593,210
10Korea, Republic of15.6849.983,188
12Korea, Republic of50.22163.823,262
7217900020Wire of iron or non-alloy steel - Plated or coated with other base metals -Other - Coated with plastics1United States18.8665.703,484
2United States18.3563.843,480
9China21.7736.301,667
7218100000Stainless steel in ingots or other primary forms; semi-finished products of stainless steel. - Ingots and other primary forms6India0.110.484,311
7226200000Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Of high speed steel7United States79.17124.751,576
7226990011Plated or coated with zinc: Of a thickness of less than 0.25 mm7United Kingdom15.9335.742,244
7228200050Not cold-formed2Vietnam0.000.37
3Netherlands0.000.12
5Netherlands0.000.36
7228300051Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Concrete reinforcing bars and rods: - With a diameter of 12 mm or less3United States1.702.261,335
5United States39.0047.291,213
7United States61.1384.671,385
7228300052Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Concrete reinforcing bars and rods: - With a diameter of more than 12 mm but not exceeding 39 mm4United States92.24100.801,093
7United States25.4536.041,416
8United States68.2485.281,250
9United States98.93127.541,289
10United States147.58152.611,034
12United States3.764.181,109
7228300081Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other, of rectangular cross section: - With a minimum cross section less than 152mm7United States953.902,109.912,212
9United States452.73904.211,997
10United States356.95691.851,938
11United States89.26148.821,667
12United States0.070.07942
7228300090Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other1United States77.43121.421,568
2United States84.01144.971,726
3United States77.45146.361,890
5United States183.24403.052,200
6United States177.18411.342,322
10United States175.26325.211,856
12United States151.67253.941,674
7229900040Wire of other alloy steel - Other flat12China7.6110.901,432
7304410090Other, of circular cross-section, of stainless steel: - Cold-drawn or cold-rolled (cold-reduced) - Other4Germany0.391.594,065
United States0.391.884,792
9Spain0.130.11832
7306300041Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Of an external diameter not exceeding 60.325 mm: - Structural tubing, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification3China265.19331.211,249
213.16264.871,243
4China49.0561.591,256
5China99.29122.631,235
6China421.24535.911,272
8China46.1754.931,190
9China51.6769.171,339
10China24.2728.471,173
11China97.71106.371,089
7306610039Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of an external periphery not exceeding 812.8 mm - Other1United States161.07585.903,638
4China51.8961.681,189
5China99.88133.681,338
6China152.14210.351,383
7China168.30351.732,090
8China148.00218.061,473
11China50.6455.231,091
12China51.6856.131,086
7306610049Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of an external periphery exceeding 812.8 mm - Other4China34.81163.824,706
6China17.4178.864,531
9China35.52132.903,741
10United States342.55813.112,374
Calgary - Total16,991.0627,761.811,634
Cambridge7208370020Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width exceeding 1,525 mm but not exceeding 1,830 mm5United States33.1646.761,410
7228300090Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other3United States1.100.31285
7United States1.012.752,724
12United States4.2118.184,321
Cambridge - Total39.4868.011,723
Carway7214910021Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon: Of a width not exceeding 76 mm2United States1.813.131,731
7214990041Other, containing by weight less than 0.25% of carbon: Rounds, of a diameter of less than 76 mm2United States1.823.171,742
7304230020Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other drill pipe - Of alloy steel2United States19.9671.483,581
Carway - Total23.5877.773,298
Coutts7208100000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - In coils, not further worked than hot-rolled, with patterns in relief12United States6.2619.853,171
7208250000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled, pickled: - Of a thickness of 4.75 mm or more1United States0.110.494,362
9United States0.200.753,769
7208370010Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width of 600 mm or more but not exceeding 1,525 mm6United States2.158.383,901
7209270000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - Not in coils, not further worked than cold-rolled (cold-reduced): - Of a thickness of 0.5 mm or more but not exceeding 1 mm11United States20.6146.202,242
7210300000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Electrolytically plated or coated with zinc8United States0.020.041,924
7210490070Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other - Of a thickness exceeding 1 mm12United States19.3844.712,308
7210700029Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Painted, varnished or coated with plastics - Plated or coated with zinc: - Other9United States33.03130.903,963
7210700090Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Painted, varnished or coated with plastics - Other1United States0.521.973,799
2United States1.798.114,518
3United States3.6713.763,746
4United States1.674.602,758
8United States1.663.031,829
10United States1.999.864,947
7211190090Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Other - Other3United States3.6714.984,084
7212400090Plated or coated with zinc: other9United States0.040.133,180
10United States0.271.154,207
7213100090Other6United States2.9111.634,001
9United States1.918.094,227
7213910070Other, containing by weight 0.6% or more of carbon10United States0.010.043,057
7214100000Forged bars and rods of iron or non-alloy steel, hot rolled1Mexico2.126.943,264
3Mexico0.000.00948
United States3.535.421,536
4Mexico1.091.911,758
6United States2.427.723,185
8Mexico0.512.304,477
11United States2.548.493,344
12United States0.742.493,369
7214200011Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less: - With a maximum yield point of 400MPa8United States0.862.923,390
7214200014Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less: - With a minimum yield point greater than 600MPa3United States20.1253.512,659
7214200090Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Other3United States35.9894.832,635
4United States39.3467.981,728
12United States9.9626.802,690
7214300090Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Other1United States1.853.181,717
3United States3.706.571,773
3.706.771,829
5Mexico0.512.384,712
United States7.4114.401,944
7United States1.853.541,909
8United States5.5610.601,908
9United States1.853.491,885
10United States3.707.081,911
11United States5.5610.241,842
12United States5.569.381,689
7214910011Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section -Containing by weight less than 0.25% of carbon: Of a width not exceeding 76 mm1United States699.751,082.241,547
2United States3.706.801,835
240.67411.801,711
3United States644.24934.091,450
183.56280.001,525
4United States337.23540.751,604
419.59653.211,557
5United States190.03346.151,822
285.44471.221,651
6United States597.991,216.812,035
7United States462.58869.531,880
8United States511.251,012.221,980
9United States229.50449.831,960
10United States471.72785.201,665
11United States336.18607.461,807
12United States34.3762.071,806
7214910012Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon: Of a width exceeding 76 mm but less than 152 mm1United States57.91101.771,757
2United States3.596.141,712
25.3443.911,733
3United States50.7287.931,734
21.4938.031,770
4United States7.1413.501,892
5United States12.6223.341,850
86.84159.261,834
6United States56.74106.131,871
7United States49.6787.991,772
8United States75.29139.181,849
9United States82.22138.681,687
10United States34.1362.771,839
11United States19.9935.281,765
12United States56.7596.681,704
7214910013Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon: Of a width of 152 mm or more1United States80.42141.241,756
2United States23.8046.261,944
61.82114.731,856
3United States95.21168.511,770
46.4587.291,879
4United States22.6641.251,821
1.853.461,867
5United States14.2626.931,888
166.15324.061,950
6United States103.49168.241,626
7United States71.10137.281,931
8United States224.03421.471,881
9United States170.33320.281,880
10United States71.12134.201,887
11United States38.0269.551,829
155.69291.871,875
12United States77.27137.541,780
7214910021Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon: Of a width not exceeding 76 mm1United States118.92206.411,736
2United States5.539.891,789
39.9773.981,851
3United States43.6881.181,858
9.0816.201,785
4United States14.6528.661,956
47.1186.891,844
5United States20.2437.451,850
45.5887.501,920
6United States31.1461.721,982
7United States30.0459.871,993
8United States22.2241.321,859
9United States27.2552.021,909
10United States10.8320.121,857
11United States1.813.361,861
9.1716.771,829
12United States26.7046.771,752
7214910022Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon: Of a width exceeding 76 mm but less than 152 mm1United States7.4313.061,757
2United States1.853.201,728
1.853.201,728
3United States3.687.041,913
4United States3.706.711,812
9United States7.4113.741,854
7214910031Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.6% or more of carbon: Of a width not exceeding 76 mm1United States38.9270.131,802
2United States3.596.541,821
3.706.751,821
3United States87.88157.191,789
47.5190.591,907
4United States11.0720.711,871
12.6723.891,885
5United States3.607.242,010
76.43145.761,907
6United States49.5366.631,345
7United States30.5143.411,423
8United States22.2239.651,784
9United States88.02164.101,864
10United States10.9519.761,805
11United States78.86153.201,943
12United States28.8251.021,770
7214910033Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.6% or more of carbon: Of a width of 152 mm or more3United States27.4039.031,425
9United States3.095.061,636
7214990041Other, containing by weight less than 0.25% of carbon: Rounds, of a diameter of less than 76 mm1United States126.20157.591,249
2United States6.9812.151,742
23.8634.201,433
3United States40.7871.921,764
59.57103.681,741
4United States1.753.231,852
5United States56.65114.942,029
6United States127.60245.441,923
7United States31.0654.731,762
8United States54.0899.221,835
9United States29.6946.051,551
10United States68.20123.811,815
11United States25.9248.271,862
12United States73.66119.121,617
7214990042Other, containing by weight less than 0.25% of carbon: Rounds, of a diameter of 76 mm or more but not exceeding 152 mm1United States3.759.652,574
3United States5.579.701,742
5.579.701,742
5United States0.341.103,217
6Mexico1.374.853,532
United States4.3615.953,657
8United States1.753.311,898
9United States0.781.882,411
11United States3.607.532,090
7214990043Other, containing by weight less than 0.25% of carbon: Rounds, of a diameter exceeding 152 mm1United States0.782.543,272
4Italy0.281.294,631
5Brazil0.431.513,533
6United States4.5415.573,427
8United States0.331.354,081
9United States1.023.743,650
7214990049Other, containing by weight less than 0.25% of carbon: Other1United States6.2311.861,903
8United States29.8246.561,561
9United States1.823.271,799
10United States12.7323.091,814
11United States1.823.121,715
12United States1.823.121,716
7214990051Other, containing by weight 0.25% or more but less than 0.6% of carbon: Rounds, of a diameter of less than 76 mm1United States28.0645.821,633
2United States9.0915.831,742
3United States18.0231.381,741
5.459.501,742
4United States24.3839.401,616
5United States3.606.571,825
10.8419.921,838
6United States33.4659.481,777
8United States63.23119.991,898
9United States16.2629.881,837
10United States16.3129.631,817
11United States5.419.871,823
14.5426.031,790
12United States23.5440.381,715
7214990053Other, containing by weight 0.25% or more but less than 0.6% of carbon: Rounds, of a diameter exceeding 152 mm1United States1.864.212,260
4United States0.441.633,698
5United States2.697.252,695
7United States2.857.312,567
9United States3.409.492,795
11United States5.1814.672,832
12United States1.234.413,592
7214990059Other, containing by weight 0.25% or more but less than 0.6% of carbon: Other1United States5.1914.942,878
2United States1.913.331,742
3Italy1.555.413,502
United States0.150.614,041
4United States3.596.561,825
6United States1.143.282,887
7Mexico3.0915.354,968
United States3.596.711,870
8United States5.5910.211,825
9United States1.913.431,799
10China1.959.524,884
11United States28.8261.322,128
12United States19.8142.662,153
7214990060Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Other, containing by weight 0.25% or more but less than 0.6% of carbon: Other, containing by weight 0.6% or more of carbon1United States33.6276.832,285
2United States6.3914.462,261
3United States6.8313.962,043
6.8325.473,730
4United States4.809.371,954
5United States6.3919.633,070
6United States106.60228.932,148
7United States4.8314.112,920
8United States22.0846.672,113
10United States10.4536.933,535
11United States31.7866.392,089
12United States22.2458.862,647
7217100045Wire of iron or non-alloy steel - Not plated or coated, whether or not polished - Round, heat treated, containing by weight less than 0.25% of carbon: Other, of a diameter of 3 mm or more8United States5.2525.284,814
7217100099Wire of iron or non-alloy steel - Not plated or coated, whether or not polished -Other, containing by weight 0.6% or more of carbon: Other2Korea, Republic of1.205.354,470
4United States0.010.043,252
11China0.120.514,231
7217200041Wire of iron or non-alloy steel - Plated or coated with zinc-aluminum, containing by weight less than 0.25% of carbon: Round, of a diameter of less than 1 mm9Korea, Republic of0.200.261,301
7217200043Wire of iron or non-alloy steel - Plated or coated with zinc-aluminum, containing by weight less than 0.25% of carbon: Round, of a diameter of 1.5 mm or more but less than 3 mm3United States0.230.813,574
4United States0.231.014,464
7217200059Wire of iron or non-alloy steel - Plated or coated with zinc-aluminum, containing by weight 0.25% or more but less than 0.6% of carbon: Other6United States0.130.624,831
7217200099Wire of iron or non-alloy steel - Other, containing by weight 0.6% or more of carbon: Other7China0.100.454,316
10Germany0.000.003,925
11China0.291.244,268
7217300039Wire of iron or non-alloy steel - Plated or coated with other base metals -Other, containing by weight 0.25% or more but less than 0.6% of carbon: Other3United States0.020.124,824
7217900093Wire of iron or non-alloy steel - Plated or coated with other base metals - Other -Containing by weight 0.6% or more of carbon1United States0.140.704,848
6United States0.592.233,776
10United States0.000.004,000
7227100000Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Of high speed steel1United States3.1512.563,989
3United States6.1224.003,922
4United States0.722.894,023
6United States0.100.444,488
7United States9.7347.894,923
8United States16.4858.903,575
12United States1.977.904,019
7228200050Not cold-formed7United States0.001.21
10United States0.000.26
7228300041Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Of tool steel (other than high-speed steel): - Of ball bearing steel1United States1.244.623,723
5United States11.5334.292,975
8United States1.752.361,350
10United States2.578.823,428
7228300049Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Of tool steel (other than high-speed steel): - Other1China1.746.383,673
Korea, Republic of0.251.114,393
Spain2.079.094,389
2China2.339.624,124
6.2623.863,812
Spain0.913.894,263
0.723.274,518
Türkiye0.090.343,804
2.059.424,604
Ukraine1.014.194,147
3China17.5477.784,434
3.2113.424,179
Italy5.3121.774,100
Korea, Republic of1.587.404,691
6.3629.414,622
Spain5.5324.264,391
Türkiye0.632.654,183
0.662.994,531
Ukraine0.954.214,436
United States2.295.242,290
4China1.557.304,714
2.3510.544,487
Italy11.7950.834,311
Korea, Republic of3.5916.244,527
Spain1.928.604,483
Türkiye3.0413.064,298
0.723.534,919
Ukraine4.8419.744,079
United States0.673.104,617
5China2.189.684,450
1.165.594,801
Italy1.436.334,433
Spain4.3819.794,520
Türkiye1.909.444,977
1.135.274,683
Ukraine0.813.434,256
United States1.843.351,825
6China3.2813.554,133
Italy4.0116.544,124
Korea, Republic of2.2811.234,923
Spain6.6627.424,116
Türkiye0.060.254,135
United States19.3354.662,827
7China1.145.604,905
USTX0.200.944,665
Korea, Republic of0.351.694,876
Türkiye0.210.964,554
8China0.562.764,928
Korea, Republic of0.311.494,878
Türkiye0.793.934,994
11China11.3456.574,987
Czechia1.376.064,434
Ukraine0.904.344,852
United States3.4511.523,337
12China4.2720.714,847
7228300060Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other, of high-nickel alloy steel5Korea, Republic of0.170.452,704
7228300071Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other rounds: - With a diameter of less than 76 mm1Brazil0.050.183,499
Mexico5.2720.353,860
United States20.8336.151,736
3United States40.3870.841,754
5United States59.86128.862,153
59.11104.051,760
8United States24.1375.503,128
10Korea, Republic of0.640.911,417
United States60.19152.782,538
11Brazil0.210.663,181
United States0.461.423,086
12United States19.2534.471,790
7228300072Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other rounds: - With a diameter of 76 mm or more but not exceeding 152 mm1Brazil0.481.723,605
Italy2.827.602,692
Korea, Republic of0.190.884,672
United Kingdom0.140.543,844
United States15.3252.493,427
2Korea, Republic of10.2646.204,503
United States3.8316.734,366
4Spain4.2517.844,195
United States1.224.393,585
4.2314.113,334
6Mexico0.812.983,686
United States5.6419.533,461
7United States9.3437.213,985
8India13.3930.832,303
Mexico0.562.103,737
United States0.591.893,176
9Türkiye4.8418.313,786
United States2.328.773,778
10United States3.2212.894,010
11United States4.4619.184,298
7228300073Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other rounds: - With a diameter of 152 mm or more but not exceeding 228 mm1Italy0.220.934,260
2Mexico0.461.072,325
United States6.1723.493,805
3China4.3211.972,772
2.306.012,610
Tokelau0.441.723,955
United States1.114.724,246
4China0.471.863,929
Italy0.120.564,764
Korea, Republic of5.4414.392,643
Spain0.090.404,441
United States7.8422.872,917
5Brazil3.519.802,793
6United States4.9318.453,744
7Mexico3.7815.794,178
United States5.1510.382,015
8India10.7126.202,447
United States3.135.151,646
10United States8.165.90723
11United States0.200.422,050
12Türkiye1.436.934,859
United States0.130.503,717
7228300074Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other rounds: - With a diameter exceeding 228 mm1Mexico2.769.553,462
3China3.4711.723,379
Spain0.060.274,568
6Czechia0.763.464,543
10Korea, Republic of5.4527.204,987
11Spain0.773.214,189
7228300081Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other, of rectangular cross section: - With a minimum cross section less than 152mm1United States1.813.081,702
5United States1.863.321,789
7United States113.65271.502,389
7228300082Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other, of rectangular cross section: - With a maximum cross section of 152mm or more5United States3.536.381,808
9United States3.676.981,901
10United States1.763.181,806
7228300090Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other1China0.240.883,653
Italy1.767.033,995
Spain1.696.033,575
Türkiye1.294.703,645
United States13.9441.592,984
2Korea, Republic of5.7614.412,500
Spain2.175.252,416
Ukraine5.9114.252,412
United States5.8715.022,558
9.2616.921,828
3China5.5319.083,451
Italy1.965.792,962
Spain8.4325.743,051
1.765.973,399
Türkiye10.3730.642,956
United Kingdom7.5235.854,766
United States23.2146.952,023
18.5296.535,212
4Korea, Republic of14.5339.012,685
Spain5.9922.393,740
3.5311.293,199
Türkiye0.281.023,625
1.376.474,727
Ukraine9.8824.342,464
United States6.2020.333,279
13.2936.012,709
5Italy1.668.284,985
Korea, Republic of4.9714.973,012
Mexico5.3320.343,815
Spain11.8846.833,943
United States19.0225.601,346
8.1828.003,422
6Spain41.28158.863,848
Türkiye26.91102.723,818
United States52.05171.683,299
7China2.2910.924,769
Mexico0.080.364,447
Spain7.0625.963,677
Ukraine3.619.092,518
United States2.875.982,084
8United States5.7217.573,071
9Italy9.0541.854,627
Spain3.7513.433,584
United States31.4791.262,900
10Spain0.281.284,505
United States1.823.361,843
11Czechia0.281.304,627
Mexico20.94101.364,841
United States22.3261.692,764
12Italy0.331.534,567
Mexico1.184.553,862
Spain9.8637.333,787
Türkiye1.937.573,930
United States27.2885.463,133
7228600000Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods1Germany0.481.763,665
India0.020.084,957
Korea, Republic of2.288.053,530
Türkiye0.451.262,829
United States2.968.983,039
4United States5.1821.634,176
5United States16.1353.253,301
6United States0.010.034,807
7China0.000.001,000
Spain0.450.34748
9Italy0.491.242,511
Korea, Republic of6.3121.793,454
Türkiye0.993.933,992
United States8.3638.524,606
12Korea, Republic of4.2320.864,928
Türkiye6.6933.134,953
United States0.040.123,353
7229900090Wire of other alloy steel - Other round - Other5China0.000.014,540
6China0.040.164,625
7China0.140.684,824
8China0.271.304,861
9China0.010.054,919
10China0.000.002,770
12China0.020.073,458
7304220000Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Drill pipe of stainless steel9United States19.9652.862,649
7304230010Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other drill pipe - New: - Of iron or non-alloy steel1Taiwan0.080.384,903
7China29.1069.752,397
8China41.93118.822,834
7304230020Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other drill pipe - Of alloy steel1United States102.06248.432,434
6Japan1.053.643,455
United States99.27209.052,106
7United States198.64279.571,407
9United States0.980.21215
10China0.422.034,790
7304240000Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other, of stainless steel1Austria0.1929.52154,976
Italy0.4264.95155,644
2Mexico0.662.984,486
4Saudi Arabia0.040.061,454
10China0.010.012,270
7304410090Other, of circular cross-section, of stainless steel: - Cold-drawn or cold-rolled (cold-reduced) - Other1United States0.291.304,410
3United States0.470.811,706
4China0.210.723,428
United States0.290.792,754
6Japan0.150.15998
10Spain0.160.422,634
United States0.3433.1896,384
12China0.120.544,304
Korea, Republic of0.540.791,443
7306300041Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Of an external diameter not exceeding 60.325 mm: - Structural tubing, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification9United States0.110.504,532
7306300051Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Of an external diameter of greater than 60.325 mm but not exceeding 168.28 mm: - Structural tubing, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification4United States19.8585.794,323
11United States13.8352.243,776
7306300061Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Of an external diameter of greater than 168.28 mm but not exceeding 273.05 mm: - Structural tubing, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification11United States0.311.504,913
7306500000Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of other alloy steel1United States0.783.514,517
2United States4.6815.733,359
3United States44.68178.814,002
4United States73.66219.942,986
1.445.103,547
5United States48.99244.584,993
0.942.993,195
6Japan1.194.073,421
United States2.8110.133,606
7United States95.35378.303,967
8United States21.2160.262,841
9United States10.0435.613,545
10United States17.65174.239,871
11United States2.817.672,728
12United States3.7510.372,767
7306610039Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of an external periphery not exceeding 812.8 mm - Other1United States664.322,172.683,271
2United States42.78135.293,162
198.99620.563,119
3United States127.58394.743,094
42.35110.452,608
4United States314.50900.622,864
206.81608.272,941
5United States41.20126.193,063
215.02677.343,150
6United States96.13314.393,270
7United States249.04808.643,247
8United States193.59546.922,825
9United States105.61337.873,199
10United States100.72290.482,884
11United States103.43243.742,357
12United States107.98251.382,328
7306610049Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of an external periphery exceeding 812.8 mm - Other2United States34.04108.793,196
4United States41.58129.303,110
7United States44.27141.073,186
11United States28.0363.872,279
12United States2.265.082,250
Coutts - Total15,774.6834,915.152,213
Del Bonita7214910011Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section -Containing by weight less than 0.25% of carbon: Of a width not exceeding 76 mm2United States65.42122.631,874
7214910012Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon: Of a width exceeding 76 mm but less than 152 mm2United States1.783.181,784
7214910021Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon: Of a width not exceeding 76 mm2United States5.5110.071,828
7214910031Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.6% or more of carbon: Of a width not exceeding 76 mm2United States3.616.581,822
7217100059Wire of iron or non-alloy steel - Not plated or coated, whether or not polished - Other, containing by weight less than 0.25% of carbon: Other2China70.0031.66452
7228300074Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other rounds: - With a diameter exceeding 228 mm2China2.175.482,526
7304230020Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other drill pipe - Of alloy steel2United States20.4150.202,459
7306610039Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of an external periphery not exceeding 812.8 mm - Other2United States127.07402.763,169
Del Bonita - Total295.98632.572,137
Edmonton7208270000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled, pickled: - Of a thickness of less than 3 mm6United States49.9697.981,961
7208370050Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width exceeding 1,830 mm1Russian Federation1,116.032,746.312,461
3Russian Federation256.34599.042,337
United States160.02373.952,337
5United States197.30453.372,298
6United States719.301,792.152,492
7United States532.251,298.812,440
8United States1,363.693,367.192,469
10United States387.52905.602,337
11United States175.74410.682,337
7208380050Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 3 mm or more but less than 4.75 mm - Of a width exceeding 1,830 mm6United States149.57340.442,276
7210300000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Electrolytically plated or coated with zinc1China4.8123.234,832
2China4.4917.823,968
3China3.1110.933,514
5China8.0427.833,462
6China6.9224.093,480
7China2.769.783,550
9China2.116.653,149
10China5.1314.412,808
11China12.4633.562,694
12China2.096.002,869
7210410000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Corrugated9China30.1846.721,548
7210490060Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other - Of a thickness of 0.5 mm or more but not exceeding 1 mm7China26.2137.691,438
8China13.7510.31750
7210490070Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other - Of a thickness exceeding 1 mm1China4.389.912,261
3China10.5624.712,339
United States0.180.10574
5China25.4871.092,791
6China10.7428.942,696
7China7.0820.502,895
8China3.569.962,799
9China10.8431.482,905
10China19.3553.892,785
11China25.2366.432,633
12China3.468.922,576
7210700090Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Painted, varnished or coated with plastics - Other12China186.28201.301,081
7212200030Of a thickness of 0.5 mm or more but not exceeding 1 mm12United States0.190.422,204
7212300030Of a thickness of 0.5 mm or more but not exceeding 1 mm5United States0.160.523,346
7212400010Not plated or coated with metal and not clad4China10.0838.523,824
United States0.200.351,685
5China33.9972.932,146
6China59.1093.691,585
11United States0.060.264,156
12United States2.565.852,283
7212400090Plated or coated with zinc: other1Türkiye20.0754.122,696
Vietnam47.0394.532,010
2Vietnam27.3666.272,422
4Vietnam82.34194.802,366
6Vietnam29.1476.622,630
7China81.81126.261,543
8Vietnam23.2264.702,786
9Vietnam71.15183.502,579
10Vietnam47.81120.752,525
12Taiwan13.9592.106,604
Vietnam24.3067.832,791
7213990053Of circular cross-section, containing by weight 0.6% or more of carbon: Of a diameter exceeding 25.5 mm2United States154.64260.621,685
3United States198.70329.281,657
6United States86.79177.302,043
7214200012Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less: - With a minimum yield point greater than 400MPa but not exceeding 500MPa3United States68.64112.181,634
7214200022Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of more than 12 mm but not exceeding 39 mm: - With a minimum yield point greater than 400MPa but not exceeding 500MPa6United States92.32132.301,433
7United States76.06110.101,448
7214200031Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm: - With a maximum yield point of 400MPa2Mexico86.06114.301,328
372.86494.891,327
3Mexico134.06170.781,274
1,286.811,619.651,259
4Mexico686.42911.081,327
258.10327.501,269
5Mexico413.41559.511,353
6Mexico1,307.662,052.451,570
7Mexico727.031,202.201,654
8Mexico974.011,477.321,517
7214200090Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Other3Mexico687.65857.291,247
United States100.71130.831,299
185.45253.811,369
4Mexico118.57213.671,802
United States89.26130.631,463
5United States166.75259.381,555
180.77241.451,336
6Mexico81.66117.671,441
7Mexico83.84124.251,482
United States280.68414.371,476
8Mexico171.44254.131,482
United States172.15233.481,356
10United States233.75331.021,416
11United States186.45213.131,143
12United States136.89172.011,257
7214300090Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Other4United States90.04128.561,428
5United States91.38146.811,606
8United States80.06117.781,471
7214910011Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section -Containing by weight less than 0.25% of carbon: Of a width not exceeding 76 mm3United States0.591.893,212
7214990041Other, containing by weight less than 0.25% of carbon: Rounds, of a diameter of less than 76 mm7United States81.42238.822,933
7214990043Other, containing by weight less than 0.25% of carbon: Rounds, of a diameter exceeding 152 mm1United States58.15142.242,446
2United States19.3448.432,504
3United States39.1298.812,526
19.2049.012,553
4United States19.5148.242,472
19.4348.352,488
7United States19.2956.392,924
8United States19.1956.372,938
10United States38.27107.732,815
11United States19.3353.692,778
7214990049Other, containing by weight less than 0.25% of carbon: Other2United States84.49194.832,306
7214990051Other, containing by weight 0.25% or more but less than 0.6% of carbon: Rounds, of a diameter of less than 76 mm2United States186.65428.982,298
6United States125.07226.221,809
11United States54.30142.382,622
7214990059Other, containing by weight 0.25% or more but less than 0.6% of carbon: Other4United States262.62599.882,284
6United States251.64455.711,811
7United States85.19144.761,699
9United States181.68481.602,651
11China75.60289.463,829
7214990060Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Other, containing by weight 0.25% or more but less than 0.6% of carbon: Other, containing by weight 0.6% or more of carbon7Brazil97.56241.622,477
United States85.22195.762,297
8Brazil93.30255.272,736
10Brazil23.3882.253,518
11Brazil23.4181.473,480
7217100041Wire of iron or non-alloy steel - Not plated or coated, whether or not polished - Round, heat treated, containing by weight less than 0.25% of carbon: Of a diameter of less than 1.5 mm, in coils weighing not more than 2 kg3China41.3255.481,343
9China3.314.861,469
7217100042Wire of iron or non-alloy steel - Not plated or coated, whether or not polished - Round, heat treated, containing by weight less than 0.25% of carbon: Other, of a diameter of less than 1 mm3United Kingdom4.5420.084,421
9United Kingdom11.6652.454,499
7217100043Wire of iron or non-alloy steel - Not plated or coated, whether or not polished - Round, heat treated, containing by weight less than 0.25% of carbon: Other, of a diameter of 1 mm or more but less than 1.5 mm12China13.6127.171,996
7217100044Wire of iron or non-alloy steel - Not plated or coated, whether or not polished - Round, heat treated, containing by weight less than 0.25% of carbon: Other, of a diameter of 1.5 mm or more but less than 3 mm6China15.2420.151,322
8China64.1780.711,258
11China18.5123.071,247
7217100099Wire of iron or non-alloy steel - Not plated or coated, whether or not polished -Other, containing by weight 0.6% or more of carbon: Other1China8.8816.211,825
Vietnam19.2049.822,595
2China6.0210.661,771
4China21.3023.141,087
5China15.0615.581,035
Vietnam19.2053.142,768
6China45.4850.091,101
7China27.4230.541,114
8China12.6821.211,673
9China23.6731.121,315
10China2.905.311,834
United States0.000.004,180
11China72.9060.35828
12China25.0020.60824
7217200041Wire of iron or non-alloy steel - Plated or coated with zinc-aluminum, containing by weight less than 0.25% of carbon: Round, of a diameter of less than 1 mm1China0.050.183,508
7217200043Wire of iron or non-alloy steel - Plated or coated with zinc-aluminum, containing by weight less than 0.25% of carbon: Round, of a diameter of 1.5 mm or more but less than 3 mm2China21.3225.751,208
3China21.3213.83649
4China190.92374.691,963
6China113.90192.711,692
9China85.28155.251,820
10China85.1091.931,080
7217200044Wire of iron or non-alloy steel - Plated or coated with zinc-aluminum, containing by weight less than 0.25% of carbon: Round, of a diameter of 3 mm or more1Brazil62.04114.561,846
2China42.6438.75909
6China54.00100.571,862
8China361.80606.941,678
9China85.28172.212,019
10China213.20291.111,365
12China21.3235.831,681
7217200049Wire of iron or non-alloy steel - Plated or coated with zinc-aluminum, containing by weight less than 0.25% of carbon: Other6Mexico1.162.762,373
8Mexico1.152.802,435
7217200073Wire of iron or non-alloy steel - Other, containing by weight less than 0.25% of carbon: Round, of a diameter of 1.5 mm or more but less than 3 mm2Qatar39.4688.602,245
7217200099Wire of iron or non-alloy steel - Other, containing by weight 0.6% or more of carbon: Other8Türkiye24.5654.382,214
9China42.0068.751,637
10Mexico1.003.583,579
12China21.0029.161,389
7217300022Wire of iron or non-alloy steel - Plated or coated with other base metals -Other, containing by weight less than 0.25% of carbon: Round, of a diameter of 1 mm or more but less than 1.5 mm3Vietnam35.9270.351,958
5Vietnam36.1267.951,881
6Vietnam17.9632.511,810
7217300049Wire of iron or non-alloy steel - Plated or coated with other base metals -Other, containing by weight 0.6% or more of carbon: Other3China20.5256.832,769
6China20.6254.842,660
7China39.60102.432,587
8China21.4050.662,367
12China19.9940.602,031
7217900020Wire of iron or non-alloy steel - Plated or coated with other base metals -Other - Coated with plastics4Vietnam46.28120.392,601
6Vietnam9.8226.182,666
8China21.7736.981,698
11China21.4836.121,681
7217900091Wire of iron or non-alloy steel - Plated or coated with other base metals -Other - Containing by weight less than 0.25% of carbon1United States0.511.853,623
2China40.7059.901,472
4China21.4023.871,115
7China46.0191.801,995
10China45.3186.381,906
12China42.8047.511,110
United States1.242.742,204
7217900092Wire of iron or non-alloy steel - Plated or coated with other base metals -Other - Containing by weight less than 0.25% of carbon1Greece23.7571.012,990
7217900093Wire of iron or non-alloy steel - Plated or coated with other base metals - Other -Containing by weight 0.6% or more of carbon1United States19.5275.783,882
6Vietnam9.8125.642,613
10Mexico1.052.722,582
7227100000Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Of high speed steel8United States0.803.524,426
7227900083Other, of a circular cross-section: Of a diameter of 19 mm or more2United States225.55367.111,628
3United States13.8226.721,934
4United States25.5955.542,171
77.02165.922,154
6United States188.77491.672,605
7United States106.83253.662,374
8United States166.59402.612,417
9United States77.06161.902,101
10China13.8735.822,583
United States77.40154.982,002
11United States124.74241.771,938
12United States91.61213.132,326
7227900090Other2United States76.84151.011,965
3United States17.8134.961,963
4United States128.77301.152,339
6United States264.53665.682,516
7United States45.84104.872,288
8United States143.15356.742,492
9United States154.75337.442,180
10United States77.28155.302,010
11United States346.98510.371,471
7228300049Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Of tool steel (other than high-speed steel): - Other2Türkiye102.38215.142,101
3Türkiye106.78221.712,076
4Türkiye46.0080.951,760
6Türkiye202.26540.142,671
9United States40.6387.952,165
11Türkiye43.80114.642,617
12Türkiye228.66634.252,774
7228300051Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Concrete reinforcing bars and rods: - With a diameter of 12 mm or less5United States15.2823.361,528
6United States164.05357.902,182
12United States44.3956.021,262
7228300052Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Concrete reinforcing bars and rods: - With a diameter of more than 12 mm but not exceeding 39 mm3United States94.42123.811,311
7United States13.0319.211,474
8United States5.437.371,356
10United States143.72204.341,422
7228300071Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other rounds: - With a diameter of less than 76 mm2United States152.46309.492,030
5Mexico8.5429.833,493
United States82.77179.592,170
6United States41.62113.162,719
7Türkiye194.34586.603,018
9China2.595.252,029
11United States78.22191.122,443
245.28475.071,937
12Türkiye668.722,750.404,113
7228300072Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other rounds: - With a diameter of 76 mm or more but not exceeding 152 mm5United States8.2928.963,493
7Türkiye58.04181.633,129
9United States165.50408.582,469
10United States80.82170.342,108
11United States80.94155.081,916
12Türkiye27.9695.993,432
7228300073Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other rounds: - With a diameter of 152 mm or more but not exceeding 228 mm2Korea, Republic of218.62548.222,508
3Korea, Republic of60.00148.932,482
4Korea, Republic of68.68162.362,364
5Korea, Republic of40.07109.772,739
58.34166.962,862
6Korea, Republic of135.56398.392,939
7Türkiye52.40171.523,273
12Türkiye64.31244.153,796
7228300090Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other2United States149.88322.222,150
3United States242.66481.841,986
4United States637.881,223.681,918
5China10.5411.531,094
40.9547.011,148
United States82.47185.432,249
82.64148.921,802
6China20.3022.051,086
United States729.031,544.802,119
7United States478.721,108.692,316
8China20.8023.741,141
Türkiye170.16679.203,992
United States155.25402.132,590
9China11.0011.501,046
United States105.74239.012,260
10Mexico0.050.071,453
11China21.1024.551,163
United States4.6815.613,335
112.94274.832,433
12China42.6034.81817
Türkiye185.19551.912,980
7229900059Wire of other alloy steel -Other round, of a diameter not exceeding 1.6 mm, containing by weight less than 0.2% of carbon and more than 0.3% of nickel or more than 0.08% of molybdenum, suitable for electric arc-welding - Other12China8.2915.101,822
7229900090Wire of other alloy steel - Other round - Other9China0.320.782,414
7304220000Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Drill pipe of stainless steel8China24.4995.803,912
7304230010Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other drill pipe - New: - Of iron or non-alloy steel1United States143.88277.251,927
7306300041Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Of an external diameter not exceeding 60.325 mm: - Structural tubing, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification8India10.5827.862,634
9India20.9358.852,812
10India14.9338.962,609
7306300051Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Of an external diameter of greater than 60.325 mm but not exceeding 168.28 mm: - Structural tubing, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification8India38.5999.182,570
9India4.0611.372,801
10India9.0323.342,586
7306610039Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of an external periphery not exceeding 812.8 mm - Other6United States322.20973.163,020
11Taiwan24.84118.934,788
12China8.0012.721,590
7306610049Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of an external periphery exceeding 812.8 mm - Other8United States1,093.645,304.404,850
9United States164.53511.453,109
10India773.461,570.632,031
United States166.43503.333,024
11India1,398.932,440.231,744
12India521.31937.271,798
Edmonton - Total35,023.1673,902.992,110
Emerson7208100000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - In coils, not further worked than hot-rolled, with patterns in relief1United States7.7724.923,206
6United States19.9055.572,792
9United States19.9129.201,466
12United States40.4059.151,464
7208250000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled, pickled: - Of a thickness of 4.75 mm or more4United States19.1148.212,524
0.962.122,212
6United States0.611.462,402
7United States0.681.462,129
8United States19.5025.151,290
7208260000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled, pickled: - Of a thickness of 3 mm or more but less than 4.75 mm4United States19.1148.212,524
7208270000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled, pickled: - Of a thickness of less than 3 mm8United States16.6635.392,123
9United States18.6626.571,424
10United States0.531.362,554
7208370010Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width of 600 mm or more but not exceeding 1,525 mm8United States20.3134.021,675
9United States40.3859.951,485
7208370020Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width exceeding 1,525 mm but not exceeding 1,830 mm3United States0.000.011,753
7United States19.7827.581,395
7208370050Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width exceeding 1,830 mm8United States61.8295.521,545
11United States20.8427.221,307
12United States41.9556.411,345
7208380010Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 3 mm or more but less than 4.75 mm - Of a width of 600 mm or more but not exceeding 1,525 mm1United States13.8541.953,029
3United States7.3519.842,700
8United States40.7983.582,049
9United States41.9266.401,584
10United States1.804.122,290
7208390000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of less than 3 mm3United States60.1764.991,080
4United States19.6724.541,248
9United States162.40254.421,567
12United States40.6943.611,072
7208400000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Not in coils, not further worked than hot-rolled, with patterns in relief2United States17.6042.682,425
3United States19.9139.091,963
12United States19.8825.551,285
7208530000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Other, of a thickness of 3 mm or more but less than 4.75 mm1United States0.833.514,211
2United States88.87150.491,693
3United States40.6180.441,981
20.4136.001,764
4Sweden3.6015.164,217
United States5.1511.882,309
20.3575.263,698
5United States69.4294.241,358
6Sweden3.7915.133,997
United States37.0990.372,437
7United States64.99184.112,833
8Mexico20.7028.441,374
United States41.37105.822,558
9Finland1.917.193,759
Mexico0.100.262,592
Sweden1.286.094,771
United States46.8588.151,882
10Sweden2.7810.913,925
United States201.84329.311,632
11United States21.7441.211,896
12Sweden1.536.434,201
United States43.3875.021,729
7208540000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Other, of a thickness of less than 3 mm2Finland0.371.754,729
United States10.7728.412,639
3Finland0.743.564,801
United States1.885.102,706
4Finland1.165.704,920
2.088.534,096
United States5.2512.532,386
41.0691.252,222
5Finland0.693.234,659
United States20.6254.892,662
6Mexico1.113.092,779
United States20.4157.202,802
7United States25.6658.012,260
8Finland1.165.484,737
Sweden0.170.774,421
United States20.2544.382,192
9United States1.393.912,816
10Finland4.3921.414,871
Mexico0.070.223,086
United States1.885.232,777
11Finland5.6726.174,617
United States22.1229.601,339
12Finland2.088.864,254
United States21.6741.401,910
7208900000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other4United States5.6217.933,189
7209170040Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - In coils, not further worked than cold-rolled (cold-reduced): - Of a thickness of 0.5 mm or more but not exceeding 1 mm - Annealed1United States8.6327.073,138
7209250000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - Not in coils, not further worked than cold-rolled (cold-reduced): - Of a thickness of 3 mm or more5United States9.5817.591,837
11United States0.481.162,432
7209260000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - Not in coils, not further worked than cold-rolled (cold-reduced): - Of a thickness exceeding 1 mm but less than 3 mm2United States2.296.122,667
3United States4.8615.333,157
4United States0.822.322,839
5United States0.932.322,487
6United States20.7586.614,173
9United States0.912.492,745
10United States20.9589.754,283
7209270000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - Not in coils, not further worked than cold-rolled (cold-reduced): - Of a thickness of 0.5 mm or more but not exceeding 1 mm10United States1.695.052,997
7209900000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - Other7United States1.132.812,479
10United States20.7431.311,509
7210120000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Plated or coated with tin: - Of a thickness of less than 0.5 mm8United States18.8450.692,691
11United States15.896.29396
7210490040Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other - Of a thickness less than 0.25 mm2United States10.1524.792,442
7210490050Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other - Of a thickness of 0.25 mm or more but less than 0.5 mm4United States16.7474.624,457
9United States1.644.792,915
7210490060Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other - Of a thickness of 0.5 mm or more but not exceeding 1 mm1United States246.05821.773,340
2United States89.93253.742,822
204.03629.573,086
3United States128.29334.502,607
4United States19.5746.792,391
151.13350.752,321
5United States17.6741.702,360
8United States0.832.503,009
11United States104.64201.011,921
12United States226.10402.571,781
7210490070Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Otherwise plated or coated with zinc: - Other - Of a thickness exceeding 1 mm1United States39.01110.972,844
2United States0.150.543,665
4.5415.603,439
3United States0.802.262,824
6.2119.063,070
4United States0.411.293,134
5United States4.1315.083,649
6United States48.70133.182,735
7United States47.71117.002,452
9United States3.8911.522,961
10United States17.9232.741,827
11United States1.264.183,317
12United States42.3393.702,213
7210700090Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Painted, varnished or coated with plastics - Other7United States13.3856.914,253
11United States40.2079.141,969
12United States1.095.084,666
7211140090Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Other, of a thickness of 4.75 mm or more - Other1United States79.79114.281,432
2United States59.8564.921,085
99.74105.811,061
3Brazil0.673.164,751
United States119.28133.171,116
138.03129.53938
4United States0.953.974,192
5Brazil0.763.574,681
United States0.733.044,145
6United States22.8972.913,186
7United States4.447.521,694
8United States0.793.354,253
9United States3.2211.453,554
7211190010Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Other - Not in coils1United States1.894.762,526
2United States0.441.182,659
0.481.282,670
3United States0.812.723,357
0.070.192,790
4United States7.9429.703,738
2.336.592,827
5United States0.350.962,760
0.932.903,104
6United States2.206.362,892
7United States2.136.433,014
8United States1.003.113,102
9United States1.925.692,958
10Türkiye0.200.723,563
United States0.812.402,968
11Türkiye0.090.313,615
United States0.351.073,026
12United States0.310.862,804
7211190090Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than hot-rolled: - Other - Other9United States34.4857.711,673
11United States18.145.31293
7211230000Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than cold-rolled (cold-reduced): - Containing by weight less than 0.25% of carbon1United States0.722.393,301
5United States0.160.754,618
7United States0.411.804,402
11United States0.562.294,090
7212300030Of a thickness of 0.5 mm or more but not exceeding 1 mm5United States22.1573.743,330
7212300040Of a thickness exceeding 1 mm5United States11.3444.243,901
9United States8.4813.031,537
7212400010Not plated or coated with metal and not clad1United States0.783.134,020
3United States2.6110.213,909
5United States0.582.854,913
10United States0.872.663,066
12United States2.707.642,826
7212400029Plated or coated with zinc: other4United States8.8537.004,184
9United States12.1759.784,913
7212400090Plated or coated with zinc: other1United States18.4463.483,442
2United States25.7784.163,265
0.000.01
4United States38.75119.773,091
5United States40.77126.713,108
6United States19.5958.072,964
7United States23.1071.853,110
8United States39.95125.383,138
9United States19.8560.263,036
12United States37.84117.993,118
7213100090Other10United States1.477.114,842
12United States1.075.084,760
7213200090Other1United States41.5773.251,762
3United States20.9131.221,493
4United States40.3472.471,796
5United States20.9338.561,843
7United States44.23170.453,854
7213910049Not tempered or treated and not partly manufactured: Other2United States21.2732.411,524
5United States40.0790.892,268
6United States57.41130.522,273
8United States20.2231.551,560
7213990032Of circular cross-section, containing by weight 0.25% or more but less than 0.6% of carbon: Of a diameter of 19 mm or more but not exceeding 25.5 mm1United States21.7937.631,727
4United States21.6740.651,875
5United States1.983.931,990
6United States39.5474.001,871
7United States19.7935.851,811
9United States19.6329.851,521
11United States51.5679.781,547
7213990033Of circular cross-section, containing by weight 0.25% or more but less than 0.6% of carbon: Of a diameter exceeding 25.5 mm5United States7.8715.671,990
6United States19.6936.391,849
7United States19.7435.571,802
10United States41.2963.621,541
11United States21.6631.541,456
7213990053Of circular cross-section, containing by weight 0.6% or more of carbon: Of a diameter exceeding 25.5 mm1United States31.7355.321,743
7213990090Other2United States18.0950.252,777
9United States44.0196.162,185
7214100000Forged bars and rods of iron or non-alloy steel, hot rolled1Mexico2.5211.564,578
2Mexico0.281.204,277
United States0.772.833,694
3Italy0.843.123,733
United States38.3389.922,346
4China0.803.394,239
Italy1.124.093,647
United States20.0049.982,499
5United States40.9698.302,400
6United States162.81492.713,026
7Italy1.867.644,107
United States47.25159.353,372
8Italy5.8614.842,531
Mexico0.853.494,128
United States9.0733.643,708
9Italy13.8937.802,722
United States1.717.374,317
10Mexico0.763.484,604
United States1.566.884,408
11Italy2.659.623,626
United States4.9010.452,134
12Mexico0.000.001,370
United States5.3317.263,239
7214200090Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Other2United States131.79203.241,542
4United States90.13117.941,308
6United States86.82122.931,416
8United States21.6041.301,912
7214300024Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Flat bars, including flat grader blade sections: - Of a width not exceeding 76 mm8United States0.150.734,929
9United States1.074.614,315
7214300033Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Rounds: - Of a diameter not exceeding 76 mm1United States0.501.593,148
7214300090Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Other4United States0.932.242,404
7United States0.972.492,582
11United States3.685.251,428
7214910011Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section -Containing by weight less than 0.25% of carbon: Of a width not exceeding 76 mm1United States30.8553.441,732
2United States10.0018.381,838
3United States35.7636.171,011
3.637.241,995
4United States13.2021.561,633
5United States19.6751.192,602
6United States0.230.753,248
7United States0.993.063,097
8United States0.050.224,337
9United States20.6240.831,980
10United States2.375.682,395
11United States19.5937.411,910
12United States0.080.283,389
7214910012Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon: Of a width exceeding 76 mm but less than 152 mm1United States9.2415.801,710
2United States20.3633.311,636
5United States3.508.102,313
6United States5.059.191,821
8United States25.6444.421,733
10United States16.7347.412,834
11United States3.913.03775
7214910013Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon: Of a width of 152 mm or more2United States20.0036.871,843
4United States19.0041.922,206
5United States7.4117.072,304
6United States3.607.672,132
8United States3.666.741,843
11United States7.0411.981,702
7214910021Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon: Of a width not exceeding 76 mm1United States4.327.011,625
2United States13.3218.761,408
1.883.441,834
3United States6.1712.001,944
4United States15.3623.281,516
6United States3.859.372,432
8United States14.9922.531,503
11United States2.223.691,664
7214910022Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon: Of a width exceeding 76 mm but less than 152 mm1United States0.140.402,929
2United States1.853.201,728
3United States20.5443.852,135
4United States0.140.392,898
2.004.242,117
6United States20.8238.191,834
7United States0.361.103,045
9United States17.7532.691,842
11United States0.080.111,385
12United States20.8247.302,272
7214910031Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.6% or more of carbon: Of a width not exceeding 76 mm2United States39.0679.202,028
3United States4.368.732,003
5United States20.3737.701,850
6United States21.2539.011,836
8United States21.9644.332,018
12United States42.3291.712,167
7214910032Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.6% or more of carbon: Of a width exceeding 76 mm but less than 152 mm3United States41.3264.171,553
10United States20.8444.872,152
12United States21.4041.261,928
7214910033Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Of rectangular (other than square) cross-section - Containing by weight 0.6% or more of carbon: Of a width of 152 mm or more9Denmark0.010.043,785
11United States20.2247.232,336
12United States7.3513.971,901
7214990041Other, containing by weight less than 0.25% of carbon: Rounds, of a diameter of less than 76 mm1United States10.4019.601,885
2United States0.330.812,463
3United States0.501.222,459
16.3142.342,597
4United States7.0916.932,389
27.6265.582,375
5United States10.8426.432,437
6United States25.8254.622,116
7United States33.8777.012,274
8United States2.775.802,098
9United States14.3431.502,197
10United States22.2245.572,051
11United States4.213.27778
12United States12.9925.231,942
7214990042Other, containing by weight less than 0.25% of carbon: Rounds, of a diameter of 76 mm or more but not exceeding 152 mm1Brazil9.6119.472,026
Korea, Republic of2.846.542,301
United States9.6621.492,224
3United States8.2619.232,328
12.2426.712,182
4United States9.6319.572,032
5United States0.732.353,215
1.734.432,567
7United States1.083.032,805
8Brazil9.818.48865
Mexico1.022.552,492
United States2.085.122,469
9United States12.1223.611,949
10Mexico4.047.971,971
United States5.4712.512,288
11United States1.072.232,075
12Mexico4.187.421,776
United States7.7117.242,237
7214990043Other, containing by weight less than 0.25% of carbon: Rounds, of a diameter exceeding 152 mm2United States3.748.102,168
4United States0.090.131,469
5United States0.200.633,182
6United States12.9032.122,491
7United States0.080.182,374
10United States0.220.713,281
7214990049Other, containing by weight less than 0.25% of carbon: Other1United States2.826.522,315
4United States14.1824.221,708
7Ukraine0.090.313,438
United States19.9437.141,863
10Czechia5.2411.332,163
11United States10.7522.082,054
7214990051Other, containing by weight 0.25% or more but less than 0.6% of carbon: Rounds, of a diameter of less than 76 mm1United States24.8940.151,613
2United States20.1732.821,627
27.5346.631,694
3United States0.230.733,127
4United States15.2510.98720
39.5062.231,575
5United States1.694.362,579
6United States28.6661.112,132
USIL3.828.452,214
7United States17.2032.491,888
8United States22.0244.182,006
9United States1.423.282,304
10United States2.055.952,903
11United States24.9246.901,882
12United States15.2123.711,559
7214990052Other, containing by weight 0.25% or more but less than 0.6% of carbon: Rounds, of a diameter of 76 mm or more but not exceeding 152 mm1Mexico8.3916.391,953
United States17.0538.842,278
2United States1.343.532,648
1.834.432,426
3Brazil2.374.802,023
United States5.6413.272,354
0.150.493,257
4Brazil1.132.662,347
Mexico10.8922.802,093
United States1.242.652,139
3.178.492,675
5Mexico0.441.202,729
United States0.872.002,297
5.3813.102,434
6Mexico1.533.822,493
United States5.2712.482,369
USIL2.576.582,559
7United States6.1316.112,630
8Brazil8.9019.312,169
United States10.9226.942,468
9Czechia8.9518.342,050
United States8.9416.561,853
10United States2.705.902,184
11Brazil1.313.532,688
United States2.726.672,457
12Mexico3.686.831,856
United States12.0727.962,317
7214990053Other, containing by weight 0.25% or more but less than 0.6% of carbon: Rounds, of a diameter exceeding 152 mm1Brazil8.8917.191,933
Czechia5.2710.461,984
United States11.3226.502,340
2Brazil8.5818.502,157
Czechia7.8715.401,956
Mexico0.210.874,126
United States8.3823.992,863
9.8325.332,577
3Brazil0.982.772,836
Czechia7.9116.692,111
Mexico1.994.602,307
United States13.3132.542,446
9.9028.102,839
4Mexico8.0618.472,291
United States15.6738.992,488
10.9729.132,655
5Brazil11.7728.642,433
Czechia6.0415.322,538
Mexico8.0819.702,438
United States4.0713.203,240
11.8330.782,601
6Czechia6.6817.212,579
USIL1.385.413,925
United States1.293.342,584
USIL0.251.064,181
7Czechia1.354.273,156
Italy0.431.593,719
United States3.408.712,560
8Brazil8.5317.532,055
Czechia5.5410.991,984
United States13.1036.192,762
9Brazil3.125.811,862
Czechia8.0017.612,200
Mexico0.592.784,682
United States11.8332.062,711
10Brazil2.712.991,106
Czechia3.967.161,806
United States12.0229.302,438
11United States22.1445.842,070
12Brazil2.205.252,383
Czechia14.4328.121,949
Italy0.140.533,716
United States14.2934.602,421
7214990059Other, containing by weight 0.25% or more but less than 0.6% of carbon: Other2United States0.060.223,830
3United States1.103.663,331
4United States17.4652.032,979
6United States19.4244.622,297
8United States0.311.254,098
9United States18.6435.061,881
7214990060Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling - Other, containing by weight 0.25% or more but less than 0.6% of carbon: Other, containing by weight 0.6% or more of carbon1United Kingdom2.357.393,146
United States14.2535.182,469
2United Kingdom0.722.393,299
United States8.7722.612,579
8.8720.292,288
3United States19.7643.782,215
0.090.232,450
4China0.994.234,252
Mexico2.324.702,024
United Kingdom2.379.834,153
10.0041.184,117
United States4.059.182,264
0.090.242,519
5United Kingdom1.184.874,129
7.6633.384,359
United States1.022.172,126
7.1619.042,658
6United Kingdom13.6758.594,286
United States12.2530.892,521
7United Kingdom17.7082.434,656
United States5.2214.642,802
8United Kingdom16.1272.214,478
United States12.7652.714,131
9Mexico1.142.752,425
United Kingdom11.7722.791,937
United States5.5313.412,424
10United Kingdom7.0531.604,485
United States5.4119.283,563
11Mexico2.375.322,244
United Kingdom19.3563.233,267
United States7.9618.602,337
12Mexico0.972.072,137
United States10.2824.732,405
7217100042Wire of iron or non-alloy steel - Not plated or coated, whether or not polished - Round, heat treated, containing by weight less than 0.25% of carbon: Other, of a diameter of less than 1 mm4United States0.050.254,949
7217100045Wire of iron or non-alloy steel - Not plated or coated, whether or not polished - Round, heat treated, containing by weight less than 0.25% of carbon: Other, of a diameter of 3 mm or more1United States2.075.482,642
2Korea, Republic of0.973.063,146
4United States2.6010.043,860
8.1922.082,695
7Korea, Republic of0.883.754,258
United States19.0392.064,838
9Korea, Republic of0.954.164,365
11United States0.913.243,577
12United States0.943.894,162
7217100052Wire of iron or non-alloy steel - Not plated or coated, whether or not polished - Other, containing by weight less than 0.25% of carbon: Round, of a diameter of 1 mm or more but less than 1.5 mm4China0.000.002,778
7217100053Wire of iron or non-alloy steel - Not plated or coated, whether or not polished - Other, containing by weight less than 0.25% of carbon: Round, of a diameter of 1.5 mm or more but less than 3 mm1United States0.200.663,312
11United States0.090.414,518
7217100054Wire of iron or non-alloy steel - Not plated or coated, whether or not polished - Other, containing by weight less than 0.25% of carbon: Round, of a diameter of 3 mm or more1Korea, Republic of0.050.132,705
United States0.140.483,472
5Mexico2.939.033,086
7United States0.090.323,521
8Mexico17.0161.513,616
11United States0.140.523,844
7217100059Wire of iron or non-alloy steel - Not plated or coated, whether or not polished - Other, containing by weight less than 0.25% of carbon: Other1United States0.231.134,901
3United States0.140.614,465
4United States11.9029.562,485
6United States0.261.314,964
7United States2.196.933,169
8United States4.7414.303,017
7217100099Wire of iron or non-alloy steel - Not plated or coated, whether or not polished -Other, containing by weight 0.6% or more of carbon: Other1United States1.975.792,941
3United States0.150.422,880
4United States1.634.762,917
5United States4.9015.493,162
6United States4.4615.493,473
7Mexico11.9333.312,793
United States4.9015.773,220
8United States6.5320.783,181
10United States1.634.822,952
7217200041Wire of iron or non-alloy steel - Plated or coated with zinc-aluminum, containing by weight less than 0.25% of carbon: Round, of a diameter of less than 1 mm1China0.000.004,740
2United States2.209.354,242
4China0.080.273,661
Mexico15.3443.322,825
5China0.080.283,773
6China0.080.293,801
9China0.100.424,214
11China0.080.324,283
7217200042Wire of iron or non-alloy steel - Plated or coated with zinc-aluminum, containing by weight less than 0.25% of carbon: Round, of a diameter of less than 1 mm2China0.000.003,870
7217200044Wire of iron or non-alloy steel - Plated or coated with zinc-aluminum, containing by weight less than 0.25% of carbon: Round, of a diameter of 3 mm or more11United States1.836.113,328
7217200049Wire of iron or non-alloy steel - Plated or coated with zinc-aluminum, containing by weight less than 0.25% of carbon: Other1China3.7217.294,653
7217200054Wire of iron or non-alloy steel - Plated or coated with zinc-aluminum, containing by weight 0.25% or more but less than 0.6% of carbon: Round, of a diameter of 3 mm or more9United States0.550.891,619
7217200059Wire of iron or non-alloy steel - Plated or coated with zinc-aluminum, containing by weight 0.25% or more but less than 0.6% of carbon: Other5United States19.0033.441,760
10United States19.4634.161,756
7217200099Wire of iron or non-alloy steel - Other, containing by weight 0.6% or more of carbon: Other1United States8.569.751,138
4Germany0.602.243,708
United States0.321.243,863
5United States35.56156.664,406
6United States37.32167.104,478
7United States1.225.834,772
11United States0.481.893,916
7217300049Wire of iron or non-alloy steel - Plated or coated with other base metals -Other, containing by weight 0.6% or more of carbon: Other3United States0.240.763,191
5United States0.983.403,479
10United States0.230.863,818
11United States1.806.713,731
7217900020Wire of iron or non-alloy steel - Plated or coated with other base metals -Other - Coated with plastics1China0.050.04812
2China0.020.041,624
United States19.0866.753,498
7United States23.2980.233,444
8United States19.2365.413,401
9United States38.15130.753,427
10China0.080.161,957
7217900091Wire of iron or non-alloy steel - Plated or coated with other base metals -Other - Containing by weight less than 0.25% of carbon3Mexico0.401.684,257
United States1.476.664,538
0.823.404,152
4Mexico0.361.544,256
United States0.301.454,910
5Mexico0.421.523,617
United States0.733.044,165
9United States0.451.513,376
10United States1.835.442,971
11United States0.642.734,238
12United States0.471.342,879
7217900092Wire of iron or non-alloy steel - Plated or coated with other base metals -Other - Containing by weight less than 0.25% of carbon3United States0.994.114,167
6United States0.913.674,053
9United States2.307.773,376
10United States0.753.444,604
7217900093Wire of iron or non-alloy steel - Plated or coated with other base metals - Other -Containing by weight 0.6% or more of carbon1China0.010.043,102
United States38.93141.443,633
2China0.040.122,682
United States50.02149.362,986
0.000.012,551
3China0.010.022,414
0.020.052,562
United States18.9849.462,606
4China0.010.022,642
0.040.102,886
United States19.4666.813,434
40.37129.293,203
5China0.010.022,569
0.040.102,903
United States18.1058.093,210
17.1953.813,129
6China0.020.062,681
United States0.090.303,348
7China0.030.092,757
United States0.532.324,378
8China0.070.233,051
Taiwan0.140.564,084
United States19.1852.572,741
9China0.040.112,885
United States37.24117.993,169
10China0.030.083,038
United States19.2961.123,168
11China0.090.272,887
United States0.271.073,929
12China0.040.143,377
United States105.61214.202,028
7218990090Stainless steel in ingots or other primary forms; semi-finished products of stainless steel. - Other: - Other - Other10United States0.350.16471
11United States0.001.06
7225300000Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, in coils1Sweden17.9725.021,392
3Sweden19.5760.403,086
United States2.075.832,822
4United States6.6014.772,239
5Finland18.0648.182,668
8United States6.0912.091,984
12United States7.6813.461,752
7225500030Of a thickness exceeding 1 mm but less than 3 mm2United States4.548.891,960
8United States20.4140.681,993
9United States5.4418.763,447
7225500040Of a thickness of 3 mm or more2United States0.542.454,490
7226920000Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Other: - Not further worked than cold-rolled (cold-reduced)1United States0.080.374,382
7227100000Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Of high speed steel1United States0.060.294,829
4United States0.060.284,620
6United States0.090.424,643
9United States0.060.284,830
12United States0.230.632,677
7227900029Of other tool steel (other than high-speed steel): Other6United States26.2960.532,302
7United States52.13121.822,337
8United States45.0851.151,135
9United States26.0653.332,046
7227900083Other, of a circular cross-section: Of a diameter of 19 mm or more1United States26.2751.381,956
2United States26.0851.501,975
3United States19.7338.341,943
5United States9.8328.402,889
6United States65.49190.172,904
7United States51.76154.002,975
8United States51.35142.642,778
9United States103.32229.842,225
10United States77.67156.552,015
11United States25.7749.771,931
7227900090Other1United States7.8415.842,020
4United States0.160.744,595
7228300041Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Of tool steel (other than high-speed steel): - Of ball bearing steel1United States19.4355.892,876
7228300049Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Of tool steel (other than high-speed steel): - Other1Brazil0.060.193,284
Mexico12.5535.892,860
United States39.42108.882,762
2China8.0037.404,676
Mexico3.9411.112,821
United States3.549.852,780
21.5160.132,796
3United States28.2885.503,024
4.9814.892,993
4Brazil4.4714.973,349
Czechia7.2821.362,932
United States24.0177.043,209
26.7979.332,961
5United States5.7518.763,261
37.51127.483,398
6Czechia7.8427.143,460
Mexico1.414.373,094
United States67.20190.792,839
7Czechia9.6733.763,490
United States34.26117.423,427
8Czechia3.2911.273,427
Italy0.924.104,473
United States68.78250.843,647
9Italy0.753.444,581
United States49.60184.853,727
10United States56.89296.685,215
11Czechia11.0536.763,327
United States37.49127.033,388
12Brazil8.9830.783,429
Czechia16.0353.143,315
Italy4.3513.873,191
United States34.54111.833,238
7228300051Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Concrete reinforcing bars and rods: - With a diameter of 12 mm or less1United States0.120.292,518
6United States3.394.831,425
7228300052Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Concrete reinforcing bars and rods: - With a diameter of more than 12 mm but not exceeding 39 mm1United States20.1064.753,222
3United States0.000.002,005
9China2.881.42494
7228300071Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other rounds: - With a diameter of less than 76 mm1United States175.54394.812,249
2United States19.7437.851,918
63.88146.172,288
3United States99.19208.102,098
102.95241.792,349
4United States104.94290.022,764
4.4715.383,436
5Brazil1.765.843,319
31.2983.932,682
United States100.35236.002,352
107.41265.672,473
6Mexico14.5050.213,462
United States193.41526.422,722
USIL2.6710.393,888
7Türkiye20.5778.903,836
United States108.27267.522,471
8Brazil10.2219.161,876
United States160.79439.672,734
9Mexico5.9419.063,211
United States92.69264.602,855
10Mexico14.0249.993,565
United States175.29478.182,728
11Mexico8.0026.203,275
United States120.47326.542,711
12United States159.04444.822,797
7228300072Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other rounds: - With a diameter of 76 mm or more but not exceeding 152 mm1Brazil1.082.091,930
China2.606.812,624
Korea, Republic of2.778.032,900
Mexico1.433.202,230
United States19.2660.563,144
2Türkiye17.7360.043,386
3Brazil0.291.053,566
Czechia7.8622.832,907
Mexico1.874.372,339
United States6.7222.903,406
22.7474.693,285
4Brazil19.4263.723,281
4.7712.922,710
Mexico12.0036.163,012
0.851.812,138
United States5.5222.984,162
12.6434.422,722
5Brazil13.5246.003,403
Czechia8.8730.793,471
Mexico9.9333.893,414
United States9.0925.452,800
15.1054.603,616
6Czechia5.0920.333,993
Korea, Republic of0.571.933,369
Mexico33.2984.062,525
United States22.9772.643,163
7Brazil4.5419.254,237
Türkiye16.7061.863,704
United States12.8648.403,762
8Czechia13.0239.993,072
Mexico2.636.462,456
United States18.3567.753,692
9Brazil16.9445.202,668
Korea, Republic of0.271.093,993
Mexico0.581.282,233
United States20.6775.313,644
10Brazil9.5232.083,370
Czechia1.587.524,769
United States68.05220.523,240
11Brazil4.9215.523,155
Czechia4.1715.783,784
Korea, Republic of10.1633.653,312
United States9.1927.202,960
22.0282.613,752
12Brazil9.0024.792,755
Czechia9.3034.023,657
Mexico2.867.142,497
United States1.516.654,408
7228300073Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other rounds: - With a diameter of 152 mm or more but not exceeding 228 mm1Korea, Republic of4.8714.813,038
Spain3.9612.043,038
United States41.62134.233,225
2China18.6352.092,795
United States1.865.122,760
3Brazil0.441.563,567
Czechia0.722.253,144
United States2.529.913,936
5.2821.784,127
4Brazil0.371.504,111
China1.354.263,155
Mexico8.0722.082,736
United States3.6210.532,910
3.3712.343,661
5Czechia15.8450.763,205
Korea, Republic of1.556.544,234
United States32.21116.283,610
25.62100.323,916
6Brazil10.7431.182,902
Czechia4.1811.882,842
Mexico20.6168.453,321
United States9.3335.723,831
7Mexico1.987.103,589
Türkiye1.796.453,610
United States46.94175.823,746
8Czechia24.6994.333,820
Korea, Republic of3.3011.673,539
United States14.6458.754,013
9Brazil0.220.683,135
Czechia2.669.723,657
United States40.69162.924,004
10Brazil0.471.272,733
Czechia1.454.983,433
Korea, Republic of2.223.721,673
United States41.36155.363,756
11Brazil0.361.263,530
Czechia2.303.311,435
United States45.68137.403,008
12Czechia0.240.933,908
United States43.64168.613,864
7228300074Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other rounds: - With a diameter exceeding 228 mm1United States10.2938.723,763
2United States2.646.962,637
3Brazil0.753.554,717
Czechia1.325.974,523
Italy0.381.503,975
United States21.1453.682,539
0.732.623,600
4Korea, Republic of0.642.163,353
United States24.1279.083,279
5China0.621.903,080
United States0.732.843,899
70.23219.823,130
6Czechia2.459.433,851
United States29.3595.663,259
7Czechia0.471.974,214
United States0.572.714,750
8United States42.61124.192,915
9United States29.2098.243,364
10United States29.3187.392,982
11Czechia2.769.773,540
Italy1.083.092,845
United States2.6012.284,713
12Brazil0.922.072,265
Czechia1.043.853,703
Mexico0.401.002,496
United States64.86127.151,961
7228300081Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other, of rectangular cross section: - With a minimum cross section less than 152mm1United States6.3512.561,976
3United States0.310.642,066
1.542.931,899
4United States0.371.012,713
5Türkiye0.150.503,414
6United States2.968.192,770
7United States40.6989.862,208
8United States3.7114.103,799
9United States0.451.132,487
10United States0.371.102,940
11United States1.335.824,363
12United States0.711.692,368
7228300090Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded - Other1Brazil23.1145.111,952
China1.405.353,811
Czechia53.39114.152,138
Italy1.675.833,482
Mexico37.8285.422,258
Türkiye8.0523.002,858
United States308.92698.902,262
2Brazil0.120.554,786
China0.532.454,626
Czechia1.274.163,277
8.5520.522,399
Germany0.532.224,153
Korea, Republic of21.0056.972,713
Mexico0.090.474,984
United States145.17249.861,721
221.32647.102,924
3Brazil0.983.994,061
China1.225.014,122
Czechia0.441.323,014
Italy3.678.102,210
Ukraine20.7250.782,451
United States101.44284.652,806
135.77268.441,977
4Brazil4.4210.552,383
Italy5.8518.423,148
Mexico4.059.652,383
Türkiye7.1322.423,145
United States288.75899.963,117
229.73704.983,069
5United States4.6517.613,788
144.51550.243,808
6Brazil5.4215.612,880
Italy0.231.164,980
Mexico12.2438.853,174
Ukraine18.1944.762,460
United States77.46266.333,438
7Mexico9.1225.902,841
United States197.53714.773,618
8Czechia5.3117.853,362
Mexico0.341.143,318
United States217.83716.543,289
9Czechia6.7225.193,746
Mexico1.992.861,438
United States289.30949.723,283
10Brazil8.8029.623,365
Czechia1.013.703,673
Italy6.3428.724,531
United States227.24752.023,309
11Czechia3.596.721,869
United States29.14113.663,900
165.88517.683,121
12Czechia19.0563.753,347
Mexico2.983.931,320
United States148.66522.783,517
7228600000Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Other bars and rods1United States20.1457.592,859
2United States27.8984.863,042
3United States20.2261.523,042
2.4511.164,553
4United States0.000.013,390
5United States0.891.271,434
6United States37.01136.673,693
7United States20.1480.413,993
8Korea, Republic of3.8915.814,062
Türkiye2.279.674,261
United States41.33142.953,459
9United States39.31169.134,302
10United States8.0732.294,001
11United States86.93341.793,932
12United Kingdom2.2410.084,508
United States0.110.373,393
7229900073Wire of other alloy steel - Other round - Of a diameter of 1.5 mm or more but less than 3 mm2United States0.200.402,031
7229900074Wire of other alloy steel - Other round - Of a diameter of 3 mm or more11United States2.139.634,514
7229900090Wire of other alloy steel - Other round - Other5China0.100.474,667
6China0.030.164,689
7China0.100.504,895
8China0.010.074,716
9United States0.010.034,905
11China0.040.133,328
12China0.060.233,761
7304230020Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other drill pipe - Of alloy steel8United States70.3497.171,381
7304240000Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other, of stainless steel11United States8.71104.1511,962
7304410010Other, of circular cross-section, of stainless steel: - Cold-drawn or cold-rolled (cold-reduced) - Of an external diameter of less than 19 mm4China0.501.132,252
11China0.020.072,847
7304410090Other, of circular cross-section, of stainless steel: - Cold-drawn or cold-rolled (cold-reduced) - Other10United States0.612.273,736
7306300041Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Of an external diameter not exceeding 60.325 mm: - Structural tubing, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification1India0.632.524,009
United States38.02124.683,279
2Mexico0.020.124,890
United States0.180.804,507
86.99279.053,208
3China1.246.114,934
United States15.0940.802,704
15.6641.052,621
4China0.000.00601
India21.20103.814,897
United States23.11103.764,491
72.14197.712,741
5United States1.184.553,870
12.3640.933,312
6India3.0214.684,855
United States21.6167.593,128
7India3.0513.464,416
United States59.28242.744,095
8India1.376.684,891
United States31.43104.573,328
9India4.7420.114,245
United States53.64166.593,106
10India0.541.643,035
United States72.29204.022,822
11India0.823.954,843
4.059.462,334
United States39.68133.903,374
12India0.190.914,813
United States24.3057.652,372
7306300051Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Of an external diameter of greater than 60.325 mm but not exceeding 168.28 mm: - Structural tubing, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification1United States31.25136.434,366
2United States31.59126.053,991
39.20167.184,264
3India2.3010.914,737
United States19.5274.233,803
3.0510.403,405
4India0.773.654,750
United States20.5079.173,861
96.08347.273,614
5United States4.2017.534,170
36.51152.294,171
6Brazil0.020.094,873
United States50.78243.284,791
7India0.250.843,317
Russian Federation1.255.304,235
United States30.92134.174,339
8India2.8714.154,936
United States94.56348.393,684
9India0.361.724,772
United States84.52320.893,797
10United States137.20562.224,098
11United States16.7350.793,036
12India1.075.294,961
United States79.61321.944,044
7306300061Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Of an external diameter of greater than 168.28 mm but not exceeding 273.05 mm: - Structural tubing, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification2United States0.050.264,960
4United States2.006.863,425
5United States0.321.484,612
6United States7.7035.054,554
USIL1.336.064,557
7United States10.8233.973,138
8United States8.0129.013,620
9United States12.3644.723,617
10United States7.9427.473,460
11United States16.5244.322,683
12United States23.4279.023,373
7306300071Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Of an external diameter of greater than 273.05 mm but not exceeding 406.4 mm: - Structural tubing, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification1United States5.1123.434,585
10United States4.5217.443,858
7306300081Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of iron or non-alloy steel - Of an external diameter greater than 406.4 mm: - Structural tubing, of ASTM A500, ASTM A513, ASTM A1085, CSA G40.21 or equivalent specification4United States2.5311.664,610
5United States13.4357.474,278
6United States16.4567.334,093
8United States6.8920.863,029
10United States2.568.013,125
11United States0.852.512,939
7306500000Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of circular cross-section, of other alloy steel1United States20.6267.943,296
2China0.522.434,673
United States16.7690.465,397
3China0.010.012,073
United States0.834.084,909
6.7033.344,974
4United States60.75243.494,008
20.6257.952,810
5United States39.43109.812,785
6United States161.52221.751,373
7United States36.31113.653,130
8United States30.2375.752,506
9Türkiye0.522.204,224
United States39.30119.263,034
10United States57.60103.631,799
11United States58.5050.51863
12United States20.3149.562,441
7306610031Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of an external periphery not exceeding 812.8 mm - Galvanized1United States6.1522.633,679
3United States8.8630.403,431
17.8561.333,435
4United States12.5743.473,459
0.672.653,958
5United States42.19111.402,640
6United States4.1414.033,391
7United States9.8231.723,229
8United States94.63277.102,928
9United States0.140.493,459
10United States0.170.523,006
11Mexico0.350.892,546
United States9.2227.062,936
12United States11.8233.672,848
7306610039Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of an external periphery not exceeding 812.8 mm - Other1Greece0.833.003,623
India0.110.514,554
United States136.82469.803,434
2United States62.58192.643,078
334.64987.642,951
3Mexico0.090.333,454
United States231.30604.872,615
195.98515.342,630
4United States244.65718.242,936
201.19613.903,051
5Mongolia0.702.623,728
United States98.98309.583,128
288.91935.053,236
6Korea, Republic of1.004.404,418
United States377.491,229.463,257
7United States175.75575.723,276
8United States212.63626.452,946
9United States127.28372.582,927
10United States42.06128.973,067
11Mexico0.130.524,136
United States37.42109.942,938
12United States98.53256.972,608
7306610041Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of an external periphery exceeding 812.8 mm - Galvanized6United States1.525.873,855
12United States3.368.882,644
7306610049Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of square or rectangular cross-section - Of an external periphery exceeding 812.8 mm - Other1United States95.28287.243,015
3United States39.11117.082,993
4United States54.39180.273,314
5United States125.37271.612,166
6United States132.60416.733,143
7United States506.901,489.502,938
8United States164.40470.692,863
9United States174.48462.262,649
10United States13.3035.402,662
11United States41.1488.422,150
7306690039Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of other non-circular cross-section - Of an external periphery not exceeding 812.8 mm - Other6United States28.03115.444,118
7306690049Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. - Other, welded, of non-circular cross-section: - Of other non-circular cross-section - Of an external periphery of exceeding 812.8 mm - Other10United States21.7491.784,221
Emerson - Total23,516.0964,159.102,728
Fort Erie7208100000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - In coils, not further worked than hot-rolled, with patterns in relief1United States20.888.71417
2United States63.2817.79281
3United States12.5033.602,687
21.1954.392,566
5United States19.7436.261,837
41.69134.083,216
6United States162.64523.393,218
7United States749.782,239.442,987
8United States79.05256.843,249
9United States59.61153.282,571
10United States39.1592.922,374
11United States6.0727.014,451
152.17243.861,603
12United States180.25229.901,275
7208250000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled, pickled: - Of a thickness of 4.75 mm or more4United States0.200.713,529
6United States10.2219.941,951
7United States0.190.733,920
7208260000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled, pickled: - Of a thickness of 3 mm or more but less than 4.75 mm2United States18.3463.013,435
4United States20.8972.653,478
5United States12.8622.551,753
82.11216.122,632
6United States117.55203.631,732
8United States59.57139.732,346
7208270000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled, pickled: - Of a thickness of less than 3 mm1United States234.18560.622,394
2United States19.0653.492,806
232.68632.772,719
3United States217.39556.102,558
58.14123.472,124
4United States19.5243.682,238
5United States74.85160.682,147
0.893.113,487
6United States40.5461.711,522
7United States81.62196.562,408
9United States2.825.411,917
11United States21.564.49208
12United States62.3961.67988
7208360000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm2United States20.6023.181,126
9United States23.2710.51452
10United States21.139.53451
11United States20.969.28443
7208370010Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width of 600 mm or more but not exceeding 1,525 mm3United States20.7834.911,680
6United States18.9334.071,800
7United States38.4544.541,158
8United States18.3523.271,268
10United States19.7414.47733
12United States38.1840.031,048
7208370020Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width exceeding 1,525 mm but not exceeding 1,830 mm3United States38.7555.751,439
5United States57.2583.411,457
10United States19.9413.33668
11United States18.857.83415
7208370050Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width exceeding 1,830 mm4United States20.2526.451,306
12United States12.5216.691,333
7208380010Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 3 mm or more but less than 4.75 mm - Of a width of 600 mm or more but not exceeding 1,525 mm2United States34.5632.83950
7208380020Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 3 mm or more but less than 4.75 mm - Of a width exceeding 1,525 mm but not exceeding 1,830 mm6United States19.9529.371,472
11United States17.2011.16649
12United States21.2314.09664
7208380050Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 3 mm or more but less than 4.75 mm - Of a width exceeding 1,830 mm11United States19.208.57446
7208390000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of less than 3 mm1Germany37.4673.191,954
United States474.411,074.652,265
2United States169.61412.942,435
3United States338.26548.041,620
367.33650.371,771
4United States522.55762.391,459
453.29674.951,489
5United States269.58446.831,658
193.36343.361,776
6United States56.34123.292,188
8United States297.55451.341,517
9United States63.3598.471,554
10United States166.12209.761,263
11United Kingdom18.6921.881,171
36.5242.211,156
United States18.4321.561,170
12United States38.2234.24896
7208400000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Not in coils, not further worked than hot-rolled, with patterns in relief5United States0.120.352,874
9United States0.160.342,162
10United States19.568.91456
7208530000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Other, of a thickness of 3 mm or more but less than 4.75 mm3United States19.1447.622,488
38.2892.512,417
7United States23.309.94427
7208540000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Other, of a thickness of less than 3 mm1Germany42.63124.242,915
5United States0.492.284,651
6United States0.070.192,643
7United States32.0113.65426
8United States2.309.584,172
9United States41.4940.69981
10United States32.7320.65631
12United States1.763.892,213
7208900000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other1United States20.0141.512,075
2United States13.8436.082,607
7United States65.42227.833,482
8United States54.79164.723,007
9United States75.52171.902,276
10United States22.8291.784,021
11United States1.818.314,577
7209150000Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - In coils, not further worked than cold-rolled (cold-reduced): - Of a thickness of 3 mm or more1United States35.4629.92844
3United States35.6065.981,853
4United States18.5155.733,011
5United States18.2843.862,400
128.14233.681,824
6United States126.95222.231,751
7United States275.54582.042,112
8United States135.82315.772,325
9United States86.89170.341,960
10United States2.163.401,575
11United States54.8180.141,462
12United States18.3328.901,577
7209160040Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - In coils, not further worked than cold-rolled (cold-reduced): - Of a thickness exceeding 1 mm but less than 3 mm - Annealed1Sweden52.92136.322,576
United States177.41515.102,903
2United States57.96150.702,600
57.48166.392,895
3Sweden54.45139.242,557
54.42139.422,562
United States212.13548.482,586
210.61544.132,584
4Sweden15.4740.012,586
36.0491.012,525
United States362.92855.112,356
270.51645.872,388
5Sweden53.79138.182,569
United States421.08817.341,941
6United States468.81837.251,786
7United States536.521,117.302,082
8United States725.971,720.092,369
9United States670.981,558.922,323
10United States1,188.222,234.481,881
11United States62.11105.581,700
501.09868.081,732
12United States292.30464.511,589
7209160090Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - In coils, not further worked than cold-rolled (cold-reduced): - Of a thickness exceeding 1 mm but less than 3 mm - Other1China1,017.802,157.902,120
USNJ18.8338.202,028
Finland19.1126.721,398
Sweden106.77256.492,402
United States393.471,068.862,716
USNJ8.6539.354,547
2China18.9639.192,067
United States81.37246.403,028
35.2881.202,302
3China174.33364.572,091
384.82799.562,078
USNJ11.1022.622,038
Sweden13.0819.441,486
United States104.34226.832,174
18.6447.842,566
4China30.1262.822,085
51.43141.002,742
Sweden19.7129.011,472
United States59.11141.802,399
37.90104.812,765
5China15.2931.372,051
Sweden8.8427.293,087
United States40.9474.871,829
236.13444.811,884
6China543.71956.531,759
Sweden21.9761.222,786
United States143.51344.912,403
7China67.40128.521,907
United States57.00118.832,085
8China28.9060.002,076
United States47.24101.712,153
9China773.411,470.121,901
United States224.68528.002,350
10China60.81118.231,944
United States48.1894.991,971
11United States79.06139.281,762
12China94.44182.441,932
United States125.56254.662,028
7209170040Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - In coils, not further worked than cold-rolled (cold-reduced): - Of a thickness of 0.5 mm or more but not exceeding 1 mm - Annealed2United States7.9430.843,884
10United States123.28221.331,795
11United States21.0437.361,776
35.2960.801,723
12United States102.64182.501,778
7209170090Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - In coils, not further worked than cold-rolled (cold-reduced): - Of a thickness of 0.5 mm or more but not exceeding 1 mm - Other2Sweden10.2631.103,032
United States17.4033.931,950
3United States129.74400.813,089
66.78194.542,913
4United States72.38190.172,627
174.46398.282,283
5United States132.43331.322,502
158.87349.802,202
6United States288.93731.682,532
7United States277.67650.942,344
8United States